Draw a neat of full floating rear axle. Label all the parts. State an application of Semi floating, three quarter floating and full floating rear axle.

Draw a neat of full floating rear axle. Label all the parts. State an application of Semi floating, three quarter floating and full floating rear axle.
by

1 Answer

Answer :

Semi floating: light motor vehicle

three quarter floating:light motor vehicle

full floating rear axle: heavy commercial vehicles

image

by

Related questions

Draw a neat sketch of Transfer case arrangement. Label all the parts and state the application of transfer case in Automobiles.

Description : Draw a neat sketch of Transfer case arrangement. Label all the parts and state the application of transfer case in Automobiles. 

Last Answer : Working of transfer case: When the shifter-A is at the central position as shown in fig. here neither the gear G1and nor the gear G2 is connected to the input shaft, it is known as neutral ... in four wheel drive vehicle along with main gearbox to transmit torque and power to the rear axle. 

State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Description : State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Last Answer : Need of Differential in automobile: 1) When vehicle is taking turn outer wheel will have to travel greater distance as compared to inner wheel. 2). If the vehicle has a solid rear axle only and no other ... turn, at the same time keep the speed of rear wheel same when going straight ahead.

Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Description : Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Last Answer : Necessity of universal joint: ● A universal joint is used where two shafts are connected at an angle to transmit the torque. ● Universal joint is used to transmit motion at varying angles.

Draw a neat sketch of cross-section of an exogenous tree and label the parts.

Description : Draw a neat sketch of cross-section of an exogenous tree and label the parts. 

Last Answer : Cross-section of an exogenous tree:

Draw a neat sketch of prismatic compass and label its component parts

Description : Draw a neat sketch of prismatic compass and label its component parts

Last Answer : Sketch of prismatic compass and label its component parts

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

Draw a neat sketch of hydraulically operated clutch and label all parts.

Description : Draw a neat sketch of hydraulically operated clutch and label all parts.

Last Answer : hydraulically operated clutch

Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Description : Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Last Answer : d) one year

Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Description : Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Last Answer : Fig:- Front EngineRear Wheel Drive Vehicle Layout

State the loads acting on the rear axle.

Description : State the loads acting on the rear axle.

Last Answer : The various loads acting on the rear axle are- 1) Driving thrust-Driving torque produced in the engine causes the thrust to be produced in the road wheels, which has to be transmitted from the ... a beam supported at ends loaded. This weight causes bending and shears force in the axle shaft.

88 firebird rear axle comes out w/new brng and retainer. What causes this

Description : 88 firebird rear axle comes out w/new brng and retainer. What causes this

Last Answer : Need Answer

Why is backlash used in rear axle?

Description : Why is backlash used in rear axle?

Last Answer : Need answer

How do you remove rear axle from 05 Suzuki Ltz 250 ATV?

Description : How do you remove rear axle from 05 Suzuki Ltz 250 ATV?

Last Answer : What is the answer ?

What is the final ratio of the rear axle of the Jaguar XJ6 year 1976?

Description : What is the final ratio of the rear axle of the Jaguar XJ6 year 1976?

Last Answer : he Jaguar XJ is a series of full-size luxury cars produced by British automobile manufacturer The original model was the last Jaguar saloon to have had the input of Sir The first-generation of the XJ ... period of 24 years, with the full length of the bumper with embedded turn signals at each end.

What is the final ratio of the rear axle of the Ford F-850 Truck year 1967?

Description : What is the final ratio of the rear axle of the Ford F-850 Truck year 1967?

Last Answer : To start with , the Ford Super Duty F-650 was one of the biggest trucks in the Ford F-series line.

The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Description : The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Last Answer : d) Between two lower links

Describe a method of lubrication for rear axle assembly of the truck.

Description : Describe a method of lubrication for rear axle assembly of the truck.

Last Answer : The combined lubrication system is very important in the final drive axle, where load and or speed transferred are high, the combination of splash and force feed of lubricant is delivered to ... trickles down due to gravity into the sump, where it is collected again and the cycle repeats  

Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Description : Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Last Answer : Figure: Valve timing diagram of 4 stroke SI engine  

Draw a neat sketch of surface condenser and label it.

Description : Draw a neat sketch of surface condenser and label it.

Last Answer : Figure: Surface Condenser

Draw a neat layout of front engine front wheel drive and label it.

Description : Draw a neat layout of front engine front wheel drive and label it.

Last Answer : Figure: Front Engine Front Wheel Drive

The laminated spring which is in common use, is of the type (a) full elliptic (b) semi elliptic (c)one quarter elliptic (d)three quarter elliptic

Description : The laminated spring which is in common use, is of the type (a) full elliptic (b) semi elliptic (c)one quarter elliptic (d)three quarter elliptic

Last Answer : (b) semi elliptic

Draw construction diagram of LVDT with label. Also state the application of LVDT.

Description : Draw construction diagram of LVDT with label. Also state the application of LVDT. 

Last Answer : Application of LVDT 1) L.V.D.T as a primary transducer can be used for displacement measurement ranging from fraction of a mm to a few cm 2) Acting an secondary transducer, used to measure force, weight and pressure. 

The following is a type of leaf springs (a) three Quarter elliptic (b) semi elliptic (c) quarter elliptic (d) all of the above

Description : The following is a type of leaf springs (a) three Quarter elliptic (b) semi elliptic (c) quarter elliptic (d) all of the above

Last Answer : (d) all of the above

(a) Draw a diagram to show the nutrition in Amoeba and label the parts used for this purpose. Mention any other purpose served by this part other than nutrition. (b) Name the glands associated with digestion of starch in human digestive tract and mention their role. (c) How is required pH maintained in the stomach and small intestine? -Biology

Description : (a) Draw a diagram to show the nutrition in Amoeba and label the parts used for this purpose. Mention any other purpose served by this part other than nutrition. (b) Name the glands associated ... mention their role. (c) How is required pH maintained in the stomach and small intestine? -Biology

Last Answer : Answer.(a) Pseudopodia serves the purpose of locomotion apart from nutrition. (b) The salivary gland is associated with digestion of starch in human digestive tract. It secretes saliva which contains ... juice from liver makes the food alkaline in small intestine for the pancreatic enzymes to act.

Draw a diagram of the front view of human heart and label any six parts including at least two, that are concerned with arterial blood supply to the heart muscles. -Biology

Description : Draw a diagram of the front view of human heart and label any six parts including at least two, that are concerned with arterial blood supply to the heart muscles. -Biology

Last Answer : This is the Answer.

(a) Draw a diagram of excretory system in human beings and label the following parts. Aorta, kidney, urinary bladder and urethra.(b) How is urine produced and eliminated ? -Biology

Description : (a) Draw a diagram of excretory system in human beings and label the following parts. Aorta, kidney, urinary bladder and urethra.(b) How is urine produced and eliminated ? -Biology

Last Answer : Answer.(a) (b) Blood from the heart comes into the kidneys afferent and efferent arteriols from the renal arteries where it enters about 2-3 million nephrons per kidney. Then, it goes through the ... goes through ureters to bladder and then to urethra where it is excreted out of body as urine.

State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions.

Description : State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions. 

Last Answer : The functions of front axle :  1) It supports the weight of front part of the vehicle. 2) It facilitates steering. 3) It absorbs shocks which are transmitted due to road surface irregularities. 4) It ... is usually a steel drop forging having 0.4 % carbon steel or 1-3 % nickel steel. 

Describe with neat sketch working of full floating type.

Description : Describe with neat sketch working of full floating type.

Last Answer : Fig:- full floating Rear axle Explanation: The figure shows the full floating axle. The wheel is on the axle casing. Two roller bearings are between the wheel and axle casing. ... supported by the wheel and the axle casing. Fully floating rear axle is used in heavy commercial vehicles 

Draw neat sketch of pre-combustion chamber and name its parts.

Description : Draw neat sketch of pre-combustion chamber and name its parts.

Last Answer : Fig. Pre-combustion chamber

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

Draw neat sketch showing various parts of die set.

Description : Draw neat sketch showing various parts of die set. 

Last Answer : Answer: 1. Stop 2.Sheet metal 3.Pilot 4.Blanking punch 5.Ram 6.Piercing punch 7.Stripper 8.die Fig. Progressive Die OR

Draw neat sketch of compound die, showing various parts of it.

Description : Draw neat sketch of compound die, showing various parts of it.

Last Answer : Answer:

Draw the neat sketch of fly press. Give the functions of important parts of it.

Description : Draw the neat sketch of fly press. Give the functions of important parts of it. 

Last Answer : Answer: OR Functions of important parts of Fly Press. 1. Ram : This is main operating part of the press which works directly during processing of a workpiece. Ram ... : A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press 

Draw neat sketch of wind turbine and name various parts in it.

Description : Draw neat sketch of wind turbine and name various parts in it.

Last Answer : Draw neat sketch of wind turbine and name various parts in it.

Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Description : Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Last Answer : (B) Are used for automobile parts like gears, axle, shaft, bearings etc

------------ are called cantilever laminated springs (a) Semi-elliptical springs (b) quarter elliptical springs (c) both (a) and (b) (d) none (Ans: b)

Description : ------------ are called cantilever laminated springs (a) Semi-elliptical springs (b) quarter elliptical springs (c) both (a) and (b) (d) none (Ans: b)

Last Answer : (b) quarter elliptical springs

(a) Draw a sectional view of the human heart and label on it – Aorta, Right ventricle and Pulmonary veins. (b) State the functions of the following components of transport system: (i) Blood (ii) Lymph -Biology

Description : (a) Draw a sectional view of the human heart and label on it – Aorta, Right ventricle and Pulmonary veins. (b) State the functions of the following components of transport system: (i) Blood (ii) Lymph -Biology

Last Answer : Answer.(a) (b) The functions of blood and lymph are as follows: (i) BloodOxygen is transported by the blood to the tissues of the body for the breakdown of digested food.Carbon dioxide is ... without which nothing will diffuse. (iii) A thin surface across which gases diffuse. (iv) Warm conditions.

(a) Draw a diagram depicting Human Alimentary Canal and label on it: Gall bladder, Liver and Pancreas. (b) State the roles of Liver and Pancreas. (c) Name the organ which performs the following functions in humans: (i) Absorption of digested food (ii) Absorption of water. -Biology

Description : (a) Draw a diagram depicting Human Alimentary Canal and label on it: Gall bladder, Liver and Pancreas. (b) State the roles of Liver and Pancreas. (c) Name the organ which performs the following functions in humans: (i) Absorption of digested food (ii) Absorption of water. -Biology

Last Answer : Answer.(a) (b) Liver: It synthesize and store bile juice secreted by gall bladder which breaks down fats into fat globules. (c) The organ which performs the following functions in humans are as ... * (i) Absorption of digested food - Small intestine. (ii)Absorption of water - Large intestine.

(a) Draw a diagram to show open stomatal pore and label on it: (i) guard cells (ii) chloroplast (b) State two functions of stomata. (c) How do guard cells regulate the opening and closing of stomatal pore? -Biology

Description : (a) Draw a diagram to show open stomatal pore and label on it: (i) guard cells (ii) chloroplast (b) State two functions of stomata. (c) How do guard cells regulate the opening and closing of stomatal pore? -Biology

Last Answer : (a) (b) Two functions of stomata are: (i) Exchange of gases between the plant and the atmosphere takes place through stomata. (ii)Transpiration in plants takes place through stomata. ( ... through these stomata, the plant closes these pores when it does not require carbon dioxide for photosynthesis.

Draw a diagram of human excretory system and label renal artery and urethra. State in brief the function of : renal artery kidney ureter urinary bladder -Biology

Description : Draw a diagram of human excretory system and label renal artery and urethra. State in brief the function of : renal artery kidney ureter urinary bladder -Biology

Last Answer : Answer. Renal artery: The renal artery carries blood to the kidneys from the abdominal aorta. This blood comes directly from the heart and is sent to the-kidneys to be filtered before it passes ... expandable muscular sac that stores urine before it is excreted out of the body through the urethra.

Draw neat sketches of any three shallow foundations and suggest suitability of them for different loading and soil conditions.

Description : Draw neat sketches of any three shallow foundations and suggest suitability of them for different loading and soil conditions.

Last Answer : Types of shallow foundation with their suitability: 1. Wall Footing: Wall footings are used for individual columns, walls and bridge piers where the bearing soil layer is within 3m (10 feet) from the ground surface. Soil ... bearing capacity of soil.    9. Slab Base:   10.Gusseted base:  

(i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Description : (i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Last Answer : (i)   (ii) Sources of air leakage in condenser: i) Air leak through joints and packing. ii) Air also comes in condenser with the steam. iii) In jet condensers dissolved air in the cooling water enters the condenser. 

Draw neat and labeled sketch of three pass packages type boiler.

Description : Draw neat and labeled sketch of three pass packages type boiler. 

Last Answer : Each set of tubes that hot combustion flue gas travels through before making a turn within the boiler, is considered a "pass." A 3-pass fire tube boiler design consists of three sets of ... design that allows more heat transfer time to deliver the same or higher efficiency rating. 

Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Description : Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Last Answer : During positive half-cycle of input, the secondary voltage VAB is positive, so diodes D1 and D2 forward biased and D3 and D4 reverse biased. The load current flows from terminal A ... smooth DC voltage appears across the load. The input and output waveforms are shown in the figure.

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Description : Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Last Answer : Waveform- Explanation When the transmission line is short circuited voltage is zero and current is maximum.The variation is according to the wavelength. When the ... The pattern repeats for every half wavelength. Thus impedance is inverted at every quarter wavelength interval.

Draw a rough diagram of collenchyma tissue and label it properly. -Science

Description : Draw a rough diagram of collenchyma tissue and label it properly. -Science

Last Answer : this is your answer

(a) Draw a schematic representation of transport and exchange of oxygen and carbon dioxide during transportation of blood in human beings and label on it: Lung capillaries, Pulmonary artery to lungs, Aorta to body, Pulmonary veins from lungs. (b) What is the advantage of separate channels in mammals and birds for oxygenated and deoxygenated blood? -Biology

Description : (a) Draw a schematic representation of transport and exchange of oxygen and carbon dioxide during transportation of blood in human beings and label on it: Lung capillaries, Pulmonary artery to ... the advantage of separate channels in mammals and birds for oxygenated and deoxygenated blood? -Biology

Last Answer : (a) A schematic representation of transportation and exchange of oxygen and carbon dioxide during transportation of blood in human beings (b) It is necessary to separate oxygenated and deoxygenated ... . The separation of oxygenated and deoxygenated blood provides high oxygen supply to the organs.

(a) Draw a diagram of human respiratory system and label the following: (i) part where air is filtered by fine hair and mucus (ii) part which terminates in balloon – like structures (iii) balloon – like structures where exchange of gases takes place. (iv) part which separates chest cavity from abdominal cavity. (b) Why is the rate of breathing in aquatic organisms much faster than in terrestrial organisms? -Biology

Description : (a) Draw a diagram of human respiratory system and label the following: (i) part where air is filtered by fine hair and mucus (ii) part which terminates in balloon - like structures (iii) ... (b) Why is the rate of breathing in aquatic organisms much faster than in terrestrial organisms? -Biology

Last Answer : (a) (b) Quantity of dissolved oxygen is fairly low in water as compared to the amount of oxygen in air. Aquatic organisms therefore have to breath faster than terrestrial organisms to absorb the required amount of oxygen from the water.

Draw a diagram of human excretory system and label kidneys, ureters on it. -Biology

Description : Draw a diagram of human excretory system and label kidneys, ureters on it. -Biology

Last Answer : Here is your diagram.