Burns caused by steam are much more severe than those caused by boiling water because

Burns caused by steam are much more severe than those caused by boiling water because
by

1 Answer

Answer :

Steam has latent heat
by
selected by

Related questions

Burns caused by steam are much severe than those caused by boiling water because – (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Description : Burns caused by steam are much severe than those caused by boiling water because – (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Last Answer : (2) Steam has latent heat Explanation: When water changes into steam, it absorbs latent heat, and when steam condenses to form water, it gives out an equal amount of latent heat. Bums caused ... boiling water, simply because steam contains more heat (in the form of latent heat) than boiling water.

Burns caused by steam are much severe than those caused by boiling water because (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Description : Burns caused by steam are much severe than those caused by boiling water because (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Last Answer : Steam has latent heat

Why does steam cause more severe burns than boiling water?

Description : Why does steam cause more severe burns than boiling water?

Last Answer : Ans: The amount of heat (latent heat) possessed by steam is much greater than the amount of heat possessed by water at the same temperature. Therefore, steam causes more severe burns than boiling water

Which of the following produces more severe burns? (1) Boiling water (2) Hot water (3) Steam (4) Melting Iceberg

Description : Which of the following produces more severe burns? (1) Boiling water (2) Hot water (3) Steam (4) Melting Iceberg

Last Answer : (3) Steam Explanation: A burn is an injury to the body's tissue resulting from heat, chemicals, electricity or sunlight. Burns are often classified as first degree (those causing damage to the ... deepest and most severe damage destruction of all layers of the skin and damage to tissues underneath.

Which of the following produces more severe burns ? (1) Boiling water (2) Hot water (3) Steam (4) Melting iceberg

Description : Which of the following produces more severe burns ? (1) Boiling water (2) Hot water (3) Steam (4) Melting iceberg

Last Answer : Steam

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer :  steam has latent heat of vaporisation

31 Scalding with steam is more severe than scalding by boiling water because A. Steam can penetrate the skin B. Steam is at a higher temperature C. Steam contains more energy than boiling water D. Steam is at a higher pressure

Description : 31 Scalding with steam is more severe than scalding by boiling water because A. Steam can penetrate the skin B. Steam is at a higher temperature C. Steam contains more energy than boiling water D. Steam is at a higher pressure

Last Answer : ANSWER: C

Scalding with steam is more severe than scalding by boiling water because (a) steam can penetrate the skin (b) steam is at a higher temperature (c) steam contains more energy than boiling water (d) steam is at a higher pressure

Description : Scalding with steam is more severe than scalding by boiling water because (a) steam can penetrate the skin (b) steam is at a higher temperature (c) steam contains more energy than boiling water (d) steam is at a higher pressure

Last Answer : Ans:(c)

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

The temperature of boiling water in a steam engine may be high because :

Description : The temperature of boiling water in a steam engine may be high because :

Last Answer : there is high pressure inside the boiler

The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Last Answer : (3) there is high pressure inside the boiler Explanation: In the boiler of a steam engine, there is a firebox where coal is shoveled into. The coal is kept burning at a very high temperature, and ... reservoir; the steam is then controlled by a slide valve to move into a cylinder to push the piston.

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Last Answer :  there is high pressure inside the boiler

Lignite is (A) A high rank coal (B) A coking coal (C) Can be used for gasification and steam generation (D) A black banded coal which burns with a non-smoky yellowish flame

Description : Lignite is (A) A high rank coal (B) A coking coal (C) Can be used for gasification and steam generation (D) A black banded coal which burns with a non-smoky yellowish flame

Last Answer : (C) Can be used for gasification and steam generation

steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Description : steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Last Answer : (C) Product must be immiscible with water

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Why is it easier to cook in a pressure cooker? (a) High pressure creates turbulence (b) More steam is formed inside the cooker (c) Boiling point of water is raised (d) Boiling point of water is lowered

Description : Why is it easier to cook in a pressure cooker? (a) High pressure creates turbulence (b) More steam is formed inside the cooker (c) Boiling point of water is raised (d) Boiling point of water is lowered

Last Answer : Ans:(c)

With rise of boiling point of a water, what will be the latent heat of steam? -Do You Know?

Description : With rise of boiling point of a water, what will be the latent heat of steam? -Do You Know?

Last Answer : answer:

How do you reverse a water boiling to make steam?

Description : How do you reverse a water boiling to make steam?

Last Answer : To reverse boiling, you need to remove energy from the system,i.e. reduce the temperature. Once the steam (gas, vapor) hasformed, you can turn it back into liquid by cooling it.

With rise of boiling point of a water, what will be the latent heat of steam?

Description : With rise of boiling point of a water, what will be the latent heat of steam?

Last Answer : Decreases

Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Description : Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Last Answer : (D) A mixture of water & steam

A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam in a boiler (C) Pressurised water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Description : A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam ... water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Last Answer : (A) Coolant water is allowed to boil in the core of the reactor

_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.(A) Molten sodium cooled(B) Helium cooled(C) Boiling water(D) Pressurised water

Description : _________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine. (A) Molten sodium cooled (B) Helium cooled (C) Boiling water (D) Pressurised water

Last Answer : (C) Boiling water

With rise of boiling point of a water, what will be the latent heat of steam?

Description : With rise of boiling point of a water, what will be the latent heat of steam?

Last Answer : Decreases

The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : b) Priming

The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Description : The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Last Answer : • Steam

A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Description : The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Last Answer : isobaric

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Description : Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Last Answer : (A) Partial condensation of steam

What are some advantage of steam cooking vegetable over boiling or simmering?

Description : What are some advantage of steam cooking vegetable over boiling or simmering?

Last Answer : What is the answer ?

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Description : A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Last Answer : In steam distillation boiling occurs when vapour pressure of organic compound & steam becomes equal to atmospheric pressure. As vapour pressure of water is higher than the organic liquid. ... organic liquid vaporizes at a temperature below its boiling point in steam distillation without decomposing.

Explain ,why an organic liquid vapourises at a temperature below its boiling point in steam distillation?

Description : Explain ,why an organic liquid vapourises at a temperature below its boiling point in steam distillation?

Last Answer : Because for boiling to occur vapour pressure of organic compound & steam should be equal to atmospheric pressure. As vapour pressure of water is higher than organic liquid. Therefore, organic liquid vaporizes at a temperature below its boiling point in steam distillation .

Nitrobenzene (boiling point = 210.6°C) is steam distilled at 1 atm pressure. Nitrobenzene will distil off __________ °C. (A) At < 100 (B) At > 210.6 (C) Between 100 and 210 (D) None of these

Description : Nitrobenzene (boiling point = 210.6°C) is steam distilled at 1 atm pressure. Nitrobenzene will distil off __________ °C. (A) At < 100 (B) At > 210.6 (C) Between 100 and 210 (D) None of these

Last Answer : (A) At < 100

Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Last Answer : (D) Simple

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Which of the following statements reflect the nursing management of the patient with a white phosphorus chemical burn? a) Do not apply water to the burn. Water should not be applied to burns from lye or white phosphorus because of the potential for an explosion or deepening of the burn.

Description : Which of the following statements reflect the nursing management of the patient with a white phosphorus chemical burn? a) Do not apply water to the burn. Water should not be applied to burns from ... from lye or white phosphorus because of the potential for an explosion or deepening of the burn.

Last Answer : a) Do not apply water to the burn. Water should not be applied to burns from lye or white phosphorus because of the potential for an explosion or deepening of the burn.

When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens B. removing a faulty lamp usually causes an alarm to sound on the bridge C. attention should be paid only to engine orders D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Description : When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens ... D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Last Answer : Answer: D

Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Description : Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Last Answer : (A) CO

Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2(D) NH3

Description : Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2 (D) NH3

Last Answer : (B) CH4

Answer: e The role of nutritional support in the cancer patient remains an important component of overall therapy. Preoperative nutritional support should be given only to those patients who do not require an emergency operation and who have severe weight loss (> 15% of pre-illness body weight) and a serum albumen < 2.9 mg%. Preoperative nutrition (enteral or parenteral) should not be given for longer than 7 to 10 days. Enteral nutrition is always the preferred route of feeding cancer patients if the GI tract is functional. There are several benefits of using the bowel lumen for nutrient delivery. The trophic effects of enteral feeding on small bowel mucosa have been well described. The integrity of the mucosal lining is maintained and it may provide an effective barrier to intraluminal

Description : Answer: e The role of nutritional support in the cancer patient remains an important component of overall therapy. Preoperative nutritional support should be given only to those patients who ... of bowel rest; this atrophy is not reversed by currently available total parenteral nutrition solutions

Last Answer : Which of the following hormones can be expected to be released as part of the stress response? a. Antidiuretic hormone (ADH) b. Aldosterone c. Insulin d. Epinephrine nswer: a, b, d ... This hormone has the exact opposite effect of insulin, which promotes glucose storage and uptake by the cells

Could my SEVERE itching be caused by a high blood-phosphate level?

Description : Could my SEVERE itching be caused by a high blood-phosphate level?

Last Answer : I'm not sure about the phosphate levels causing the itching, but having protein in your urine can be a sign of kidney failure (since you already mention that your kidney seems to be declining). ... their pores and cause itching skin. Definitely talk to your doctor about it on Wednesday. Good luck!