Why are marble faced buildings made with marble that has been polished?

Why are marble faced buildings made with marble that has been polished?
by

1 Answer

Answer :

Purely aesthetics - it makes the building 'look nice'.
by

Related questions

Why are marble faced buildings made with marble that has been polished?

Description : Why are marble faced buildings made with marble that has been polished?

Last Answer : Purely aesthetics - it makes the building 'look nice'.

Which one of the following rocks is used for monumental buildings? (A) Granite (B) Marble (C) Sand stone (D) Slate

Description : Which one of the following rocks is used for monumental buildings? (A) Granite (B) Marble (C) Sand stone (D) Slate

Last Answer : Answer: Option B

Roller chains are used for: a)Higher speed and higher loads b)made of high grade steel c)components are harden and polished d)All of the above

Description : Roller chains are used for: a)Higher speed and higher loads b)made of high grade steel c)components are harden and polished d)All of the above

Last Answer : d)All of the above

Does the statue of liberty need to be polished? (Details inside )

Description : Does the statue of liberty need to be polished? (Details inside )

Last Answer : answer:Yes, they could. Copper (when near oxygen) eventually makes the chemical copper oxide, which has a greenish color. That, and carbon in the atmosphere, eventually turn into copper carbonate. The copper ... statue by exposing raw copper, and finally because it would cost a hell of a lot to do.

Can you varnish over polished wood?

Description : Can you varnish over polished wood?

Last Answer : answer:My web searches for Fabulustre are turning up a metal polishing compound. Polishing compounds like this are very fine abrasive particles in a matrix of wax or grease. If this is what was used, then ... would adhere well to that, because it will still be able to enter the grain of the wood.

At what point would a car benefit from being buffed and polished?

Description : At what point would a car benefit from being buffed and polished?

Last Answer : answer:First, any car that is painted red should be polished and waxed at least every 6 months. its called oxidation. Most more expensive cars come with a clearcoat finish on it, from the factory. these vehicles do ... on it and gets a car wash and wax at least every two weeks. I say go for it.

Can a polished display be polished to a gloss?

Last Answer : Locally where, I don't know, maybe some phone specialty store. But here's a video on how to make it at home: https://www.youtube.com/watch?v=Ciw_TnA62FQ

how do I keep the veneer finish on my wood furniture from yellowing when polished?

Description : how do I keep the veneer finish on my wood furniture from yellowing when polished?

Last Answer : Need Answer

What are the uses of Polished Tumbled Stones?

Description : What are the uses of Polished Tumbled Stones?

Last Answer : Polish tumbled stones are naturally beautiful materials that can be shaped and polished even more beautifully. Tumbled stones uses are quite varied because of their affordability and abundance. You can use them as home décor, personalized gifts, jewelry, crafts, meditation and spiritual healing.

Does anyone know where I can get my car polished?

Description : Does anyone know where I can get my car polished?

Last Answer : You can get your car polished at any car wash. You can also take your car to a dealership where you purchased the car and they will also wash it and polish it for you as well.

Niacin deficiency is common in people whose staple food is (A) Wheat (B) Polished rice (C) Maize and /or sorghum (D) None of these

Description : Niacin deficiency is common in people whose staple food is (A) Wheat (B) Polished rice (C) Maize and /or sorghum (D) None of these

Last Answer : Answer : C

People consuming polished rice as their staple food are prone to (A) Beriberi (B) Pellagra (C) Both (A) and (B) (D) None of these

Description : People consuming polished rice as their staple food are prone to (A) Beriberi (B) Pellagra (C) Both (A) and (B) (D) None of these

Last Answer : Answer : A

In countries where polished rise is the main cereal in their diet, people suffer from (a) pellagra (b) scurvy (c) beriberi (d) osteomalacia

Description : In countries where polished rise is the main cereal in their diet, people suffer from (a) pellagra (b) scurvy (c) beriberi (d) osteomalacia

Last Answer : Ans:(a)

The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Description : The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Last Answer : (3) to reduce heat loss by radiation Explanation: Polished surfaces are poor radiators of heat. So loss of heat on that account is reduced and the electric iron remains hotter than otherwise.

The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Description : The base of an electric iron is brightly polished mainly - (1) to make it smooth and frictionless (2) to make it rust-proof (3) to reduce heat loss by radiation (4) to make it more durable

Last Answer : (3) to reduce heat loss by radiation Explanation: Polished surfaces are poor radiators of heat. So loss of heat on that account is reduced and the electric iron remains hotter than otherwise.

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

Why rate of condensation is higher on a polished surface compared to rusty surface ?

Description : Why rate of condensation is higher on a polished surface compared to rusty surface ?

Last Answer : Polished surface promotes drop wise condensation and does not wet the surface.

How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Description : How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Last Answer : D. By application of antireflection coating

Dropwise condensation occurs on __________ surfaces. (A) Clean and dirt free (B) Smooth clean (C) Contaminated cooling (D) Polished

Description : Dropwise condensation occurs on __________ surfaces. (A) Clean and dirt free (B) Smooth clean (C) Contaminated cooling (D) Polished

Last Answer : (C) Contaminated cooling

A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished

Description : A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished

Last Answer : (B) Black & rough

The most conducive surface for dropwise condensation to occur is the __________ surface. (A) Coated (B) Oily (C) Glazed & polished (D) Smooth

Description : The most conducive surface for dropwise condensation to occur is the __________ surface. (A) Coated (B) Oily (C) Glazed & polished (D) Smooth

Last Answer : (B) Oily

The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Description : The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Last Answer : (d) completely reversed load

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Nucleate boiling is promoted (A) On polished surfaces (B) On rough surfaces (C) In the absence of agitation (D) None of these

Description : Nucleate boiling is promoted (A) On polished surfaces (B) On rough surfaces (C) In the absence of agitation (D) None of these

Last Answer : (B) On rough surfaces

The thermal radiation emitted by a body is proportional to T n , where T is its absolute temperature. The value of 'n' is exactly 4 for (A) Black painted bodies only (B) All bodies (C) Polished bodies only (D) A black body

Description : The thermal radiation emitted by a body is proportional to T n , where T is its absolute temperature. The value of 'n' is exactly 4 for (A) Black painted bodies only (B) All bodies (C) Polished bodies only (D) A black body

Last Answer : (B) All bodies

The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Description : The main reason for making the copper calorimeter (used in bomb calorimeter) silvery white and shining/polished is to (A) Minimise its corrosion (B) Avoid radiation heat loss (C) Make it look attractive (D) None of these

Last Answer : (B) Avoid radiation heat loss

The highly polished monolithic Ashokan Pillars were carved out of single pieces of a buff-coloured sandstone, usually mined from the quarries of?

Description : The highly polished monolithic Ashokan Pillars were carved out of single pieces of a buff-coloured sandstone, usually mined from the quarries of?

Last Answer : Chunar near Mirzapur

Granite is not suitable for ordinary building purpose because (A) It cannot be polished (B) It is not a fire proof material (C) It is costly (D) It has less crushing strength

Description : Granite is not suitable for ordinary building purpose because (A) It cannot be polished (B) It is not a fire proof material (C) It is costly (D) It has less crushing strength

Last Answer : Answer: Option C

Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below: (A) Both A and R is true and R is the ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Share is a components. a) Sharp b) Polished c) Pointed d) All of above

Description : Share is a components. a) Sharp b) Polished c) Pointed d) All of above

Last Answer : All of above

Which is NOT a characteristic of emissivity?  A. It is high with most nonmetals  B. It is directly proportional to temperature  C. It is independent with the surface condition of the material  D. It is low with highly polished metals

Description : Which is NOT a characteristic of emissivity?  A. It is high with most nonmetals  B. It is directly proportional to temperature  C. It is independent with the surface condition of the material  D. It is low with highly polished metals

Last Answer : It is independent with the surface condition of the material

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Description : When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Last Answer : ∙ b. 4 %

In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Last Answer : E. Overextension of lining in cavity

Why can Class IV gold not be used in cavity as a filling material: A. Can not be polished “burnished” B. The corrosive properties

Description : Why can Class IV gold not be used in cavity as a filling material: A. Can not be polished “burnished” B. The corrosive properties

Last Answer : A. Can not be polished “burnished”

Class V composite resin restorations can be polished, A. 24 hours after application B. Immediately after application C. 3 to 4 days D. 3 to 4 weeks E. Not at all

Description : Class V composite resin restorations can be polished, A. 24 hours after application B. Immediately after application C. 3 to 4 days D. 3 to 4 weeks E. Not at all

Last Answer : B. Immediately after application

Granite is not suitable for ordinary building purpose because a) It cannot be polished b) It is not fireproof c) It is costly*

Description : Granite is not suitable for ordinary building purpose because a) It cannot be polished b) It is not fireproof c) It is costly*

Last Answer : c) It is costly*

Which first Mughal building to have been built entirely of marble?

Description : Which first Mughal building to have been built entirely of marble?

Last Answer : Itmad-ud-Daula’s tomb

What do you say to someone who has a marble made in China lodged in their head?

Description : What do you say to someone who has a marble made in China lodged in their head?

Last Answer : “Have you lost your marbles?”

Was the Parthenon made of marble?

Description : Was the Parthenon made of marble?

Last Answer : What is the answer ?

Wall decorations made from small pieces of marble set in mortar were commonly seen in Roman art. What is this type of artwork called?

Description : Wall decorations made from small pieces of marble set in mortar were commonly seen in Roman art. What is this type of artwork called?

Last Answer : This type of decoration is often called a mosaic. The definition of a mosaic is a picture or pattern produced by arranging together small colored pieces of hard material, such as stone, tile, or glass. Judging from your question, the correct answer would be A MOSAIC.

An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss

Description : An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss

Last Answer : c) Terrazzo*

Have you ever been faced with your own mortality?

Description : Have you ever been faced with your own mortality?

Last Answer : More than once and as recently as one year ago. I know that life is too short and it can be taken away when you least expect it,so find a way to be happy :)

What has been the biggest challenge you have faced starting an online business?

Description : What has been the biggest challenge you have faced starting an online business?

Last Answer : There are lots of huge challenges. For me, the biggest challenge is prioritizing. I always seem to have 200+ important projects, but I can only do 1 or 2 at a time, and picking the rights ones is key ... . It's a careful balance, of work, focus, and strategy. And you must avoid burnout. Good luck.

What are some of the moral dilemmas you've been faced with at work or school?

Description : What are some of the moral dilemmas you've been faced with at work or school?

Last Answer : To go to class or not to go to class…that is the question.

Jim and Joey were on vacation and driving along a deserted country road from the town of Kaysville to the town of Lynnsville. They came to a multiple fork in the road. The sign post had been knocked down and they were faced with choosing one of five different directions. Since they had left their map at the last gas station and there was no one around to ask, how could Jim and Joey find their way to Lynnsville? -Riddles

Description : Jim and Joey were on vacation and driving along a deserted country road from the town of Kaysville to the town of Lynnsville. They came to a multiple fork in the road. The sign post had been knocked ... there was no one around to ask, how could Jim and Joey find their way to Lynnsville? -Riddles

Last Answer : They need to stand the signpost up so that the arm reading Kaysville points in the direction of Kaysville, the town they had just come from. With one arm pointing the correct way, the other arms will also point in the right directions.

Can you Identify at LEAST two other situations in history that have been comparable to the situations faced by the Young Turks or Japan.?

Description : Can you Identify at LEAST two other situations in history that have been comparable to the situations faced by the Young Turks or Japan.?

Last Answer : Need answer

What was the ethical dilema that the cardiac surgeon could have been faced with if John Q took his own life?

Description : What was the ethical dilema that the cardiac surgeon could have been faced with if John Q took his own life?

Last Answer : ~ The human rights that have been violated include the right to life ., The reason why this human right was violated in this movie is because John Q's son was in dire need of a heart transplant in order to continue living but was rejected because they did not have the money to afford it.

Point out the wrong statement. a) Distributed transaction systems such as internetworks or cloud computing systems magnify the difficulties faced by identity management systems b) Services that provide digital identity management as a service have been part of internetworked systems from Day One c) IDaaS Server establishes the identity of a domain as belonging to a set of assigned addresses d) None of the mentioned

Description : Point out the wrong statement. a) Distributed transaction systems such as internetworks or cloud computing systems magnify the difficulties faced by identity management systems b) Services that provide digital ... a domain as belonging to a set of assigned addresses d) None of the mentioned

Last Answer : IDaaS Server establishes the identity of a domain as belonging to a set of assigned addresses