What can cause leg stiffness or tightness?

What can cause leg stiffness or tightness?
by

1 Answer

Answer :

Lots of information here http://www.livestrong.com/article/136909-causes-leg-pain-stiffness/ Please consult a doctor if the stiffness continues.
by

Related questions

Which cough syrup works best for when the throat is also itchy and there is chest tightness?

Description : Which cough syrup works best for when the throat is also itchy and there is chest tightness?

Last Answer : I am a big fan of Mucinex for such things. The main ingredient thins and loosens muchus, helping with chest tightness and preventing it from becoming something like bronchitis. I take the tablets, but ... Tylenol for fever and pain plus some Fisherman's Friends cough drops and a good cup of tea.

tightness of the sciatic nerve can result in lower back pain. -General Knowledge

Description : tightness of the sciatic nerve can result in lower back pain. -General Knowledge

Last Answer : The given statement is true.

My anxiety , chest tightness , body tingling. Can I eat Endever 10 ?

Description : My anxiety , chest tightness , body tingling. Can I eat Endever 10 ?

Last Answer : : You can take INDEVER 10 for the symptoms of your high blood pressure . However, take the medicine according to the advice of a good doctor.

What alternative chiropractic treatments are available to reduce muscle tightness for patients with controlled scoliosis?

Description : What alternative chiropractic treatments are available to reduce muscle tightness for patients with controlled scoliosis?

Last Answer : Muscle tightness and Back pain associated with scoliosis should always be reported to your primary physician. With his/her approval, alternative treatments such as acupuncture, massage therapy, and yoga may provide some relief.

In case of sewer lines A. Water test is carried out to check water tightness of the joints B. Test for straightness is carried out with the help of a lamp and mirror C. Obstruction test is carried out with the help of smooth ball of diameter 13 mm D. All the above

Description : In case of sewer lines A. Water test is carried out to check water tightness of the joints B. Test for straightness is carried out with the help of a lamp and mirror C. Obstruction test is carried out with the help of smooth ball of diameter 13 mm D. All the above

Last Answer : ANS: D

D.C. motor brush adjustment includes attention to _________. A. angle with the commutator and clearance within the holder B. brush length and pigtail tightness C. grade of material and surface dirt conditions D. all of the above

Description : D.C. motor brush adjustment includes attention to _________. A. angle with the commutator and clearance within the holder B. brush length and pigtail tightness C. grade of material and surface dirt conditions D. all of the above

Last Answer : Answer: D

When the nurse administers intravenous gamma-globulin infusion, she recognizes that which of the following complaints, if reported by the patient, may indicate an adverse effect of the infusion? a) Tightness in the chest Flank pain, tightness in the chest, or hypotension indicates adverse effects of gamma-globulin infusion.

Description : When the nurse administers intravenous gamma-globulin infusion, she recognizes that which of the following complaints, if reported by the patient, may indicate an adverse effect of the infusion? a) ... urination is a sign of urinary tract infection, not an adverse effect of gamma-globulin infusion.

Last Answer : a) Tightness in the chest Flank pain, tightness in the chest, or hypotension indicates adverse effects of gamma-globulin infusion.

Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Description : Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Last Answer : Option D

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

61 The degree of mechanical vibrations produced by the laminations of a transformers depends on A. Tightness of clamping B. Gauge of laminations C. Size of laminations D. All of the above

Description : 61 The degree of mechanical vibrations produced by the laminations of a transformers depends on A. Tightness of clamping B. Gauge of laminations C. Size of laminations D. All of the above

Last Answer : D. All of the above

Have you ever had one leg significantly more swollen than the other? Did you find out the cause? How was it resolved?

Description : Have you ever had one leg significantly more swollen than the other? Did you find out the cause? How was it resolved?

Last Answer : Did you have any trauma?

And...Can Sciatica cause numbness in my right leg?

Description : And...Can Sciatica cause numbness in my right leg?

Last Answer : You’re either cutting off circulation of blood vessels and/or having some kind of nerve obstruction. Ask your doctor for a referral to get a physical therapy evaluation asap.

What can cause leg pain at night?

Description : Hello. Lately I have a problem that my legs hurt at night when I sleep. What can cause leg pain at night?

Last Answer : There can be many causes. Diagnosis cannot be made without examination and online. This may require reduced vascular patency.

Can sciatic nerve cause pain in the lower right abdomen and right buttock down the leg into the ankle?

Description : Can sciatic nerve cause pain in the lower right abdomen and right buttock down the leg into the ankle?

Last Answer : What is the answer ?

Could a heating blanket cause leg cramps at night?

Description : Could a heating blanket cause leg cramps at night?

Last Answer : A heating pad can be used to help with the leg cramps, not usually causing them. There is lots of information on the internet about leg cramps. A few things to try would be some simple stretching and exercises before bed and drink lots of water.

What's the best way to figure out the cause of leg pain?

Description : What's the best way to figure out the cause of leg pain?

Last Answer : You can start with your primary care physician to find out the cause of your leg pain. Your PCP can do an array of test to try to determine what the underlying reason is for the pain.

How to stop muscle soreness/stiffness from exercise?

Description : How to stop muscle soreness/stiffness from exercise?

Last Answer : answer:Heat, rest, Advil and a day or so. It will pass. Congratulations. You are young and will bounce back. (Please use breaks in long walls of text.) Even at your age, you can overdo things.

What would you expect in a graph showing the stiffness of a spring over the force exerted onto it?

Description : What would you expect in a graph showing the stiffness of a spring over the force exerted onto it?

Last Answer : My thoughts, and I'm just assuming, are that the graph would have two axes. One (probably the x-axis) would be the force exerted on the spring, measured in some unit. The other ( ... the force exerted on the spring increases, I think that the stiffness of the spring would change accordingly.

In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Description : In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Last Answer : d.infinite

Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above

Description : Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above

Last Answer : a.K is a banded matrix

Which of the following is not a method for calculation of the stiffness matrix? a.The minimum potential energy principle b.Galerkin's principle c.Weighted residual method d.Inverse matrix method

Description : Which of the following is not a method for calculation of the stiffness matrix? a.The minimum potential energy principle b.Galerkin's principle c.Weighted residual method d.Inverse matrix method

Last Answer : d.Inverse matrix method

The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Last Answer : d.0

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Description : Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Last Answer : c.both material and geometry

On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF

Description : On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF

Last Answer : a.KQ=F

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Description : A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Last Answer : a. 8 cm

What kind of doctor specializes in joint stiffness?

Description : What kind of doctor specializes in joint stiffness?

Last Answer : You will likely want to visit a general practice first as they would be better equipped to identifying if the problem is just your joints or if it is another issue that just shows symptoms in ... that specializes in joints then the general practitioner should be able to provide you with a referral.

What are the best ways to relieve joint stiffness?

Description : What are the best ways to relieve joint stiffness?

Last Answer : If you suffer from joint stiffness you may need to be prescribed with Arthritis medication and/or take to the usage of a supportive brace. Exercise is also very beneficial for stiff joints.

For muscle soreness and stiffness, how effective is chiropractic massage?

Description : For muscle soreness and stiffness, how effective is chiropractic massage?

Last Answer : Chiropractic massages will help with sore muscles. They are very theraputic. You can also go to a certifed massage therapost for a regualar massage as well.

A 45-year-old surgeon has developed symmetric early morning stiffness in her hands. She wishes to take a nonsteroidal anti-inflammatory drug to relieve these symptoms and wants to avoid gastrointestinal side effects. Which one of the following drugs is most appropriate? (a) Aspirin (b) Celecoxib (c) Ibuprofen (d) Indomethacin (e) Piroxicam

Description : A 45-year-old surgeon has developed symmetric early morning stiffness in her hands. She wishes to take a nonsteroidal anti-inflammatory drug to relieve these symptoms and wants to avoid gastrointestinal side ... appropriate? (a) Aspirin (b) Celecoxib (c) Ibuprofen (d) Indomethacin (e) Piroxicam

Last Answer : Ans: B

In a crystal, an atom vibrates at a frequency determined by (a) the heat content of the crystal (b) the temperature of the crystal (c) the stiffness of the bonds it makes with neighbors

Description : In a crystal, an atom vibrates at a frequency determined by (a) the heat content of the crystal (b) the temperature of the crystal (c) the stiffness of the bonds it makes with neighbors

Last Answer : Ans: C

Are elastomeric parts or Wire Rope Isolators (WRI) better suited to very specific multi axis stiffness requirements?

Description : Are elastomeric parts or Wire Rope Isolators (WRI) better suited to very specific multi axis stiffness requirements?

Last Answer : Elastomers are more flexible in creating custom isolator performance in multi axis systems. The WRI can also be wound differently to customize stiffness.

Do the Wire Rope Isolators (WRI) provide the same stiffness in tension and compression?

Description : Do the Wire Rope Isolators (WRI) provide the same stiffness in tension and compression?

Last Answer : No, the tension stiffness is significantly greater than the compression stiffness. Also, ITT Enidine Inc. Incorporated does not recommend that the WRI be used in tension.

Penetration test determines the __________ of the grease. (A) Stiffness (B) Lubricating properties (e.g. oilness) (C) Service temperature (D) Variation in viscosity with temperature

Description : Penetration test determines the __________ of the grease. (A) Stiffness (B) Lubricating properties (e.g. oilness) (C) Service temperature (D) Variation in viscosity with temperature

Last Answer : (A) Stiffness

The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Description : The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Last Answer : (C) Creep limit

Ratio of tensile to strain is A. Young's modulus B. stress C. stiffness D. tensile force

Description : Ratio of tensile to strain is A. Young's modulus B. stress C. stiffness D. tensile force

Last Answer : Young's modulus

Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Last Answer : a) Modulus of elasticity

For two springs in parallel, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Description : For two springs in parallel, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Last Answer : (B) k 1 + k 2

For two springs in series, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Description : For two springs in series, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Last Answer : (A) k 1 k 2 / (k 1 + k 2 )

The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above

Description : The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above

Last Answer : (D) all of the above

Two springs of stiffness k1 and k2 are connected in series, the combined (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Description : Two springs of stiffness k1 and k2 are connected in series, the combined (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Last Answer : (A) k1k2/k1 + k2

When a helical spring is cut into two halves, the stiffness of each half spring will be, (A) Same as original spring (B) Double of original spring (C) Half of original spring (D) One fourth of original spring

Description : When a helical spring is cut into two halves, the stiffness of each half spring will be, (A) Same as original spring (B) Double of original spring (C) Half of original spring (D) One fourth of original spring

Last Answer : (B) Double of original spring

Two springs of stiffness k1 and k2 are connected in parallel, the combined stiffness of the connection is given by, (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Description : Two springs of stiffness k1 and k2 are connected in parallel, the combined stiffness of the connection is given by, (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Last Answer : (C) k1 + k2

The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (D) Force required to produce unit deflection

A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False

Description : A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False

Last Answer : b) False

The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors

The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Description : The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Last Answer : b) False

The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Description : The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Last Answer : b) False

Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Last Answer : (C) Resilience