What are the best ways to relieve joint stiffness?

What are the best ways to relieve joint stiffness?
by

1 Answer

Answer :

If you suffer from joint stiffness you may need to be prescribed with Arthritis medication and/or take to the usage of a supportive brace. Exercise is also very beneficial for stiff joints.
by

Related questions

What are effective ways to relieve joint pain?

Description : What are effective ways to relieve joint pain?

Last Answer : There are medical and homeopathic ways to relieve joint pain. Which method you choose, of course depends on how you want to treat it. There are medicines that your doctor can prescribe and over the counter ... the area. For knee joint pain, you could try a brace or a shot to the affected area.

A 45-year-old surgeon has developed symmetric early morning stiffness in her hands. She wishes to take a nonsteroidal anti-inflammatory drug to relieve these symptoms and wants to avoid gastrointestinal side effects. Which one of the following drugs is most appropriate? (a) Aspirin (b) Celecoxib (c) Ibuprofen (d) Indomethacin (e) Piroxicam

Description : A 45-year-old surgeon has developed symmetric early morning stiffness in her hands. She wishes to take a nonsteroidal anti-inflammatory drug to relieve these symptoms and wants to avoid gastrointestinal side ... appropriate? (a) Aspirin (b) Celecoxib (c) Ibuprofen (d) Indomethacin (e) Piroxicam

Last Answer : Ans: B

What kind of doctor specializes in joint stiffness?

Description : What kind of doctor specializes in joint stiffness?

Last Answer : You will likely want to visit a general practice first as they would be better equipped to identifying if the problem is just your joints or if it is another issue that just shows symptoms in ... that specializes in joints then the general practitioner should be able to provide you with a referral.

Can joint pain supplements relieve the pain permanently?

Description : Can joint pain supplements relieve the pain permanently?

Last Answer : To increase joint relief from having joint pain, fish oil supplements have been established as a very good supplement for Arthritis like pain and overall antioxidant relief.

What kind of supplements can I take to relieve the joint pain?

Description : What kind of supplements can I take to relieve the joint pain?

Last Answer : Ice is one of the best ways to relieve joint pain. One of the other good ways to relieve joint pain is to use icy hot pads on the joint. Those are the best ways to relieve pain.

The most common complication after knee arthroscopy is a) joint effusion. Joint effusion produces marked pain, and the physician may need to aspirate the joint to remove fluid and relieve the pressure.

Description : The most common complication after knee arthroscopy is a) joint effusion. Joint effusion produces marked pain, and the physician may need to aspirate the joint to remove fluid and relieve the ... Complaints of the knee locking are associated with functioning of the injured knee prior to arthroscopy.

Last Answer : a) joint effusion. Joint effusion produces marked pain, and the physician may need to aspirate the joint to remove fluid and relieve the pressure.

The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

Description : The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

Last Answer : Answer: Option D

What are ways to relieve back pain?

Description : What are ways to relieve back pain?

Last Answer : answer:A really high quality bed. I experience the most trouble with my back when I sleep on the couch or a really shitty mattress. Also, too much sleep, even on a quality bed can give ... pain is exacerbated by your pregnancy hopefully you'll get some feedback from women that have been pregnant.

Ways to relieve stress?

Description : Ways to relieve stress?

Last Answer : I am very tempted to press “Great Answer”.

What are some good ways to relieve stress?

Description : What are some good ways to relieve stress?

Last Answer : Mild stress relief can be obtained through relaxation techniques such as progressive relaxation. For this, muscles are tightened, held, and released systematically until the entire body is more relaxed. For high stress, contact a doctor.

What are some ways to relieve heartburn?

Description : What are some ways to relieve heartburn?

Last Answer : The best way to relieve heartburn is to identify & avoided your trigger foods. Some other tips are remaining upright after a meal, take a teaspoon of vinegar, chew on a piece of sugar-free gum or drink a glass of whole milk.

Where can I find ways to relieve stress?

Description : Where can I find ways to relieve stress?

Last Answer : First you should consider going to your personal physician to make sure there is no underlying problem that is causing the stress. If it is just the run of the mill stress we all experience, then try a counselor who can help with both the symptoms and the control of the stress.

Alternative Ways To Relieve Menstrual Cramp Pains?

Description : Alternative Ways To Relieve Menstrual Cramp Pains?

Last Answer : You can find relief from the pain of menstrual cramps without using pain medicines. Certain yoga stretches that target the abdomen and lower back muscles can help, as can relaxation and meditation ... as natural pain killers. Using these therapies in conjunction with applied heat is very effective.

What are some ways I can relieve sciatic pain during pregnancy?

Description : What are some ways I can relieve sciatic pain during pregnancy?

Last Answer : Some ways to relieve sciatic pain during pregnancy include elevating the legs, increasing water intake, stretching and yoga. The best way is to have the baby!

Quick Ways To Relieve Stress

Description : Quick Ways To Relieve Stress

Last Answer : Quick Ways To Relieve Stress By the time we put in a full workday and tend to our families, we don't have much time or energy to do a lot. Take a look and see if any ... and exhaled breath. Concentrate on deep breathing. Stretch: Standard stretching exercises are good for relieving tension."

Are there any non-pill ways to treat joint pain?

Description : Are there any non-pill ways to treat joint pain?

Last Answer : Stretching is a great way to relieve joint pain with out treatment with pills. Stretching will help improve your joints and they will hurt less when you move around.

How to stop muscle soreness/stiffness from exercise?

Description : How to stop muscle soreness/stiffness from exercise?

Last Answer : answer:Heat, rest, Advil and a day or so. It will pass. Congratulations. You are young and will bounce back. (Please use breaks in long walls of text.) Even at your age, you can overdo things.

What would you expect in a graph showing the stiffness of a spring over the force exerted onto it?

Description : What would you expect in a graph showing the stiffness of a spring over the force exerted onto it?

Last Answer : My thoughts, and I'm just assuming, are that the graph would have two axes. One (probably the x-axis) would be the force exerted on the spring, measured in some unit. The other ( ... the force exerted on the spring increases, I think that the stiffness of the spring would change accordingly.

In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Description : In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Last Answer : d.infinite

Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above

Description : Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above

Last Answer : a.K is a banded matrix

Which of the following is not a method for calculation of the stiffness matrix? a.The minimum potential energy principle b.Galerkin's principle c.Weighted residual method d.Inverse matrix method

Description : Which of the following is not a method for calculation of the stiffness matrix? a.The minimum potential energy principle b.Galerkin's principle c.Weighted residual method d.Inverse matrix method

Last Answer : d.Inverse matrix method

The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Last Answer : d.0

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Description : Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Last Answer : c.both material and geometry

On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF

Description : On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF

Last Answer : a.KQ=F

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Description : A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Last Answer : a. 8 cm

What can cause leg stiffness or tightness?

Description : What can cause leg stiffness or tightness?

Last Answer : Lots of information here http://www.livestrong.com/article/136909-causes-leg-pain-stiffness/ Please consult a doctor if the stiffness continues.

For muscle soreness and stiffness, how effective is chiropractic massage?

Description : For muscle soreness and stiffness, how effective is chiropractic massage?

Last Answer : Chiropractic massages will help with sore muscles. They are very theraputic. You can also go to a certifed massage therapost for a regualar massage as well.

In a crystal, an atom vibrates at a frequency determined by (a) the heat content of the crystal (b) the temperature of the crystal (c) the stiffness of the bonds it makes with neighbors

Description : In a crystal, an atom vibrates at a frequency determined by (a) the heat content of the crystal (b) the temperature of the crystal (c) the stiffness of the bonds it makes with neighbors

Last Answer : Ans: C

Are elastomeric parts or Wire Rope Isolators (WRI) better suited to very specific multi axis stiffness requirements?

Description : Are elastomeric parts or Wire Rope Isolators (WRI) better suited to very specific multi axis stiffness requirements?

Last Answer : Elastomers are more flexible in creating custom isolator performance in multi axis systems. The WRI can also be wound differently to customize stiffness.

Do the Wire Rope Isolators (WRI) provide the same stiffness in tension and compression?

Description : Do the Wire Rope Isolators (WRI) provide the same stiffness in tension and compression?

Last Answer : No, the tension stiffness is significantly greater than the compression stiffness. Also, ITT Enidine Inc. Incorporated does not recommend that the WRI be used in tension.

Penetration test determines the __________ of the grease. (A) Stiffness (B) Lubricating properties (e.g. oilness) (C) Service temperature (D) Variation in viscosity with temperature

Description : Penetration test determines the __________ of the grease. (A) Stiffness (B) Lubricating properties (e.g. oilness) (C) Service temperature (D) Variation in viscosity with temperature

Last Answer : (A) Stiffness

The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Description : The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Last Answer : (C) Creep limit

Ratio of tensile to strain is A. Young's modulus B. stress C. stiffness D. tensile force

Description : Ratio of tensile to strain is A. Young's modulus B. stress C. stiffness D. tensile force

Last Answer : Young's modulus

Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Last Answer : a) Modulus of elasticity

For two springs in parallel, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Description : For two springs in parallel, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Last Answer : (B) k 1 + k 2

For two springs in series, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Description : For two springs in series, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2

Last Answer : (A) k 1 k 2 / (k 1 + k 2 )

The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above

Description : The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above

Last Answer : (D) all of the above

Two springs of stiffness k1 and k2 are connected in series, the combined (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Description : Two springs of stiffness k1 and k2 are connected in series, the combined (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Last Answer : (A) k1k2/k1 + k2

When a helical spring is cut into two halves, the stiffness of each half spring will be, (A) Same as original spring (B) Double of original spring (C) Half of original spring (D) One fourth of original spring

Description : When a helical spring is cut into two halves, the stiffness of each half spring will be, (A) Same as original spring (B) Double of original spring (C) Half of original spring (D) One fourth of original spring

Last Answer : (B) Double of original spring

Two springs of stiffness k1 and k2 are connected in parallel, the combined stiffness of the connection is given by, (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Description : Two springs of stiffness k1 and k2 are connected in parallel, the combined stiffness of the connection is given by, (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2

Last Answer : (C) k1 + k2

The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (D) Force required to produce unit deflection

A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False

Description : A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False

Last Answer : b) False

The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors

The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Description : The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Last Answer : b) False

The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Description : The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False

Last Answer : b) False

Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Last Answer : (C) Resilience

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Description : A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Last Answer : (A) 32