For the number A[15:0] = 0110110010001111, A[14:13] is ______ A[3:2]. a. less than b. greater than c. the same as d . cannot be determined

For the number A[15:0] = 0110110010001111, A[14:13] is ______ A[3:2].
a. less than
b. greater than
c. the same as
d . cannot be determined
by

1 Answer

Answer :

c. the same as
by

Related questions

For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Last Answer : d. Cannot be determined

Prasad and Satish started a business with investments of Rs.2000 and Rs.5300 respectively. At the end of every month, Prasad invests Rs.300 while Satish withdraws Rs.300. What is the ratio in which they should share the profits at the end of one year. a)13:14 b)1:1 c)14:13 d)Cannot be determined

Description : Prasad and Satish started a business with investments of Rs.2000 and Rs.5300 respectively. At the end of every month, Prasad invests Rs.300 while Satish withdraws Rs.300. What is the ratio in which they should share the profits at the end of one year. a)13:14 b)1:1 c)14:13 d)Cannot be determined

Last Answer : b)1:1

The average age of the students in a class is 14. The average age of half of the students in that class and the class teacher is 16. The average age of the remaining half of the students is 15. What is the number of students in that class? a) 20 b) 70 c) 80 d) Cannot be determined e) None of these

Description : The average age of the students in a class is 14. The average age of half of the students in that class and the class teacher is 16. The average age of the remaining half of the students is 15. What is the number of students in that class? a) 20 b) 70 c) 80 d) Cannot be determined e) None of these

Last Answer : Because total no. of students is not known we cannot find the answer. Answer: d)

Pick the one that is used for logical operations or comparisons such as less than equal to or greater than. a. Arithmetic and Logic Unit b. Control Unit c. Both of above

Description : Pick the one that is used for logical operations or comparisons such as less than equal to or greater than. a. Arithmetic and Logic Unit b. Control Unit c. Both of above

Last Answer : a. Arithmetic and Logic Unit

Who is the determined by the time taken by the stages the requires the most processing time: a. Clock period b. Flow through c. Throughput d. None of these

Description : Who is the determined by the time taken by the stages the requires the most processing time: a. Clock period b. Flow through c. Throughput d. None of these

Last Answer : a. Clock period

The coprocessors operate in ______ with a processor on the same buses and with the same instruction _______. a) Parallel, byte stream. b) Series, byte stream. c) Series, bite stream d) Parallel, bite stream.

Description : The coprocessors operate in ______ with a processor on the same buses and with the same instruction _______. a) Parallel, byte stream. b) Series, byte stream. c) Series, bite stream d) Parallel, bite stream.

Last Answer : a) Parallel, byte stream.

The maximum electron capacity of any orbital is (a) 2 (b) 6 (c) 14 (d) Cannot be determined unless the principal quantum number is known

Description : The maximum electron capacity of any orbital is (a) 2 (b) 6 (c) 14 (d) Cannot be determined unless the principal quantum number is known

Last Answer : Ans:(a)

L2 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Description : L2 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Last Answer : b. On Mother Board

L1 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Description : L1 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Last Answer : a. On Processor

When the write enable input is not asserted, the gated D latch ______ its output. a. can not change b. clears c. sets d. complements

Description : When the write enable input is not asserted, the gated D latch ______ its output. a. can not change b. clears c. sets d. complements

Last Answer : a. can not change

The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Description : The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Last Answer : a. Interrupt

The problem of bus confect and sparse address distribution are eliminated by the use of ______ address technique: a. Fully decoding b. Half decoding c. Both a & b d. None of these

Description : The problem of bus confect and sparse address distribution are eliminated by the use of ______ address technique: a. Fully decoding b. Half decoding c. Both a & b d. None of these

Last Answer : a. Fully decoding

The external system bus architecture is created using from ______ architecture: a. Pascal b. Dennis Ritchie c. Charles Babbage d. Von Neumann

Description : The external system bus architecture is created using from ______ architecture: a. Pascal b. Dennis Ritchie c. Charles Babbage d. Von Neumann

Last Answer : d. Von Neumann

A new signal group on the 80486 is the ______. a) PARITY b) DP0-DP3 c) PCHK d) all

Description : A new signal group on the 80486 is the ______. a) PARITY b) DP0-DP3 c) PCHK d) all

Last Answer : b) DP0-DP3

The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Description : The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Last Answer : c) 3Kbyte, 01000H, 007FFH

ACALL instruction allows specifying ______address in the instruction and calling subroutine within ______ program memory block. a) 2byte, 3K b) 11bit, 2K c) 9bit, 2K d) 1byte, 3K

Description : ACALL instruction allows specifying ______address in the instruction and calling subroutine within ______ program memory block. a) 2byte, 3K b) 11bit, 2K c) 9bit, 2K d) 1byte, 3K

Last Answer : c) 9bit, 2K

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit

Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit

Last Answer : c) 40, 8 bit

If ______ and ________ connections are made so that an error condition in 8087 can interrupt to the processor. a) BHE, RQ/GT1 b) BUSY, TEST c) INT, NMI d) RQ/GT0, RQ/GT1

Description : If ______ and ________ connections are made so that an error condition in 8087 can interrupt to the processor. a) BHE, RQ/GT1 b) BUSY, TEST c) INT, NMI d) RQ/GT0, RQ/GT1

Last Answer : c) INT, NMI

______ input is available, so that another coprocessor can be connected and function in _________ with the 8087. . a) RQ/GT0, parallel b) RQ/GT1, parallel c) QS1 & QS0, parallel d) S0 & S1, parallel.

Description : ______ input is available, so that another coprocessor can be connected and function in _________ with the 8087. . a) RQ/GT0, parallel b) RQ/GT1, parallel c) QS1 & QS0, parallel d) S0 & S1, parallel.

Last Answer : a) RQ/GT0, parallel

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte

Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte

Last Answer : c) 40, 8 bit

RIM is used to check whether, ______ a) The write operation is done or not b) The interrupt is Masked or not c) a & b

Description : RIM is used to check whether, ______ a) The write operation is done or not b) The interrupt is Masked or not c) a & b

Last Answer : b) The interrupt is Masked or not

The purpose of the microprocessor is to control ______

Description : The purpose of the microprocessor is to control ______  A. memory B. switches C. processing D. tasks

Last Answer : The purpose of the microprocessor is to control memory 

Microprocessor is the ______ of the computer and it perform all the computational tasks

Description : Microprocessor is the ______ of the computer and it perform all the computational tasks  A. main B. heart C. important D. simple

Last Answer : Microprocessor is the heart of the computer and it performs all the computational tasks

Which threads have greater resistance to unscrewing? a) Coarse b) Fine c) They have equal resistance d) Cannot be determined

Description : Which threads have greater resistance to unscrewing? a) Coarse b) Fine c) They have equal resistance d) Cannot be determined

Last Answer : b) Fine

Two students appeared at an examination. One of them secured 18marks more than the other and his marks was 72% of the sum of their marks. What are the marks obtained by them? a) 12.5,23.3 b) 26.7,16.0 c) 13.3,14.2 d) 11.45, 29.45 e) 29.8,15.4

Description : Two students appeared at an examination. One of them secured 18marks more than the other and his marks was 72% of the sum of their marks. What are the marks obtained by them? a) 12.5,23.3 b) 26.7,16.0 c) 13.3,14.2 d) 11.45, 29.45 e) 29.8,15.4 

Last Answer : Answer: D  Let the marks secured by them be x and (x + 18)  Then sum of their marks = x + (x + 18) = 2x + 18  Given that (x + 18) was 72% of the sum of their marks  =>(x+18) = 72/100(2x+18)  => ... 11x = 126 x = 11.45  Then (x + 18) = 11.45 + 18 = 29.45  Hence their marks are 11.45 and 29.45

The status that cannot be operated by direct instructions isa) Cy b) Z c) P d) AC

Description : The status that cannot be operated by direct instructions isa) Cy b) Z c) P d) AC

Last Answer : d) AC

The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Description : The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Last Answer : d. Either of the above

SOD pin can drive a D flip-flop? a) SOD cannot drive any flip-flops. b) SOD cannot drive D flip-flop, but can drive any other flop-flops. c) Yes, SOD can drive D flop-flop. d) No, SOD cannot drive any other flop-flops except D flop-flop

Description : SOD pin can drive a D flip-flop? a) SOD cannot drive any flip-flops. b) SOD cannot drive D flip-flop, but can drive any other flop-flops. c) Yes, SOD can drive D flop-flop. d) No, SOD cannot drive any other flop-flops except D flop-flop

Last Answer : b) SOD cannot drive D flip-flop, but can drive any other flop-flops

8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

What is the output of the following? i = 5 while True: if i%0O9 == 0: break print(i) i += 1 a) 5 6 7 8 b) 5 6 7 8 9 c) 5 6 7 8 9 10 11 12 13 14 15 …. d) error

Description : What is the output of the following? i = 5 while True: if i%0O9 == 0: break print(i) i += 1 a) 5 6 7 8 b) 5 6 7 8 9 c) 5 6 7 8 9 10 11 12 13 14 15 …. d) error

Last Answer : d) error

Let A and B be two fuzzy integers defined as: A={(1,0.3), (2,0.6), (3,1), (4,0.7), (5,0.2)} B={(10,0.5), (11,1), (12,0.5)} Using fuzzy arithmetic operation given by Image (A) {(11,0.8), (13,1), (15,1)} (B) {(11,0.3), (12,0.5), (13,1), (14,1), (15,1), (16,0.5), (17,0.2)} (C) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,1), (16,0.5), (17,0.2)} (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Description : Let A and B be two fuzzy integers defined as: A={(1,0.3), (2,0.6), (3,1), (4,0.7), (5,0.2)} B={(10,0.5), (11,1), (12,0.5)} Using fuzzy arithmetic operation given by (A) {(11,0.8), (13,1), (15,1)} ( ... ,0.2)} (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Last Answer : (D) {(11,0.3), (12,0.5), (13,0.6), (14,1), (15,0.7), (16,0.5), (17,0.2)}

Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB(x))) Then, f(A+B) is equal to (A) {(0.5,12), (0.6,13), (1,14), (0.7,15), (0.7,16), (1,17), (1,18)} (B) {(0.5,12), (0.6,13), (1,14), (1,15), (1,16), (1,17), (1,18)} (C) {(0.3,12), (0.5,13), (0.5,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Description : Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB( ... ,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Last Answer : (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} 

If Ram knows that y is an integer greater than 2 and less than 7 and Hari knows that y is an integer greater than 5 and less than 10, then they may correctly conclude that (A) y can be exactly determined (B) y may be either of two values (C) y may be any of three values (D) there is no value of y satisfying these conditions

Description : If Ram knows that y is an integer greater than 2 and less than 7 and Hari knows that y is an integer greater than 5 and less than 10, then they may correctly conclude that (A) y can be exactly ... two values (C) y may be any of three values (D) there is no value of y satisfying these conditions

Last Answer : (A) y can be exactly determined

At same temperatures, the radiation emitted by all real surfaces is ______ the radiation emitted by a black body.  A. Less than  B. Greater than  C. Equal to  D. Either less than or greater than

Description : At same temperatures, the radiation emitted by all real surfaces is ______ the radiation emitted by a black body.  A. Less than  B. Greater than  C. Equal to  D. Either less than or greater than

Last Answer : Less than

Total managerial remuneration cannot exceed ____% of net profit A. 11 B. 12 C. 13 D. 14

Description : Total managerial remuneration cannot exceed ____% of net profit A. 11 B. 12 C. 13 D. 14

Last Answer : A. 11

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

If the compound interest accrued on an amount of Rs.15,000/- in two years is Rs.2,496/-.What is the rate of interest p.c.p.a.? a) 8 b) 12 c) 7.5 d) Cannot be determined e) None of these

Description : If the compound interest accrued on an amount of Rs.15,000/- in two years is Rs.2,496/-.What is the rate of interest p.c.p.a.? a) 8 b) 12 c) 7.5 d) Cannot be determined e) None of these

Last Answer : Let the rate of interest p.c.p.a. be x. 2496 =15000 * x /100 x = 16.64 16.64 is the rate of interest compounded for two year & for one year = 8% 8% C.I. table for two year. I year = 8% II year = 8.64 Total =16.64% Answer: a)

A cistern is filled in 15 hours by three pipes P, Q and R. The pipe R is thrice as fast as Q and Q is thrice as fast as P. How much time will pipe P alone take to fill the tank? A) 120 hrs B) 195 hrs C) 135 hrs D) Cannot be determined

Description : A cistern is filled in 15 hours by three pipes P, Q and R. The pipe R is thrice as fast as Q and Q is thrice as fast as P. How much time will pipe P alone take to fill the tank? A) 120 hrs B) 195 hrs C) 135 hrs D) Cannot be determined 

Last Answer : B Suppose pipe P alone takes x hours to fill the tank. Then, pipes Q and R will take x/3 and x/9hours respectively to fill the tank. 1/x + 3/x + 9/x = 1/15 13/x = 1/15 => x = 195 hrs.

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

What are the three decisions making operations performed by the ALU of a computer? a. Grater than b. Less than c. Equal to d. All of the above

Description : What are the three decisions making operations performed by the ALU of a computer? a. Grater than b. Less than c. Equal to d. All of the above

Last Answer : d. All of the above

They say the universe is 14 billion years old and is expanding at the speed of light, so the maximum distance from one point to another cannot be greater than 28 billion light years. Is this true?

Description : They say the universe is 14 billion years old and is expanding at the speed of light, so the maximum distance from one point to another cannot be greater than 28 billion light years. Is this true?

Last Answer : answer:Cosmology, eh? From what I've read-and I'm a scientist, but not a cosmologist or particularly gifted with math-we don't really know what the universe is, yet. We have a lot of elegant ... a little closer: for one, that the points we're observing are entangled with, or coexist as, others.

I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 XII=12 XIII=13 XIV=14 XV=15...... Of course, I + XI = X is wrong. You are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Description : I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 ... are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Last Answer : Most people would get to one move at the least, but the real answer is zero moves. If you rotate the whole question around 180 degrees, it will display this: X = IX + I

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Three pipes A, B and C can fill a tank in 6 hours. After working at it together for 2 hours, C is closed and A and B can fill the remaining part in 7 hours. The number of hours taken by C alone to fill the tank is: a) 10 b) 14 c) 12 d) 13 e) 15

Description : Three pipes A, B and C can fill a tank in 6 hours. After working at it together for 2 hours, C is closed and A and B can fill the remaining part in 7 hours. The number of hours taken by C alone to fill the tank is: a) 10 b) 14 c) 12 d) 13 e) 15

Last Answer : (A+B+C) - (A+B) (A+B+C) =1/6 and (A+B+C) in 2hrs=2/6 and remaining part 1-2/6=2/3. So (A+B) in 7 hrs is 2/ (3*7) =2/21. 1/6-2/21=1/14 so answer is 14. Answer: b)