A transmission line is operating with a Phase shift of 80° between two ends. If the load is suddenly increased

A transmission line is operating with a Phase shift of 80° between two ends. If the load is suddenly increased

A) The phase displacement will increase

B) The phase displacement will decrease

C) The phase displacement will not change

D) The surge impedance will increase
by

1 Answer

Answer :

A transmission line is operating with a Phase shift of 80° between two ends. If the load is suddenly increased The phase displacement will increase

by

Related questions

To check the three line fuses of a three-phase system consisting of a three-phase motor, you must _____________. A. place the starter in the 'stop' position B. make sure the motor is operating at full load to guard against a false reading C. place the leads across the 'hot' ends of the fuses D. place the leads across the bottom ends of the fuses

Description : To check the three line fuses of a three-phase system consisting of a three-phase motor, you must _____________. A. place the starter in the 'stop' position B. make sure the motor is operating at full ... leads across the 'hot' ends of the fuses D. place the leads across the bottom ends of the fuses

Last Answer : Answer: A

What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. Automation causes large leaps in repositioning. d. Automation slows production capability. e. It requires more employees for the production line.

Description : What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. ... d. Automation slows production capability. e. It requires more employees for the production line.

Last Answer : a. The product requires increased time/expense for subsequent short-move repositioning.

Termination means A. result of disconnecting a line from a transmitter B. result of cutting both ends of a conductor C. looking back impedance of a line with no load D. load connected to the output end of a transmission line

Description : Termination means A. result of disconnecting a line from a transmitter B. result of cutting both ends of a conductor C. looking back impedance of a line with no load D. load connected to the output end of a transmission line

Last Answer : D. load connected to the output end of a transmission line

In an AC transmission line difference in phase of voltage at two ends of the line is due to

Description : In an AC transmission line difference in phase of voltage at two ends of the line is due to (a) System voltage (b) Insulators (c) Resistance of line (d) Reactance of line

Last Answer : reactance of line

A three phase transmission line delivers a load of 5 MW at 0.8 power factor lagging. Resistance of each...

Description : A three phase transmission line delivers a load of 5 MW at 0.8 power factor lagging. Resistance of each conductor is 0.5 ohm / km. Receiving end voltage is 33 kV. If the line loss is not to exceed 10%, determine the length of the line.  (A) 7 km (B) 27.9 km (C) 56.8 km (D) 13.9 km

Last Answer : B

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Description : On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Last Answer : (C) Increased reflux ratio

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

If field excitation is suddenly lost to an alternator operating in parallel, that alternator will _____________. A. supply excessive current to the bus B. operate at the same load, but with reduced voltage C. lose its load and tend to overspeed D. become overloaded and slow down

Description : If field excitation is suddenly lost to an alternator operating in parallel, that alternator will _____________. A. supply excessive current to the bus B. operate at the same load, but with reduced voltage C. lose its load and tend to overspeed D. become overloaded and slow down

Last Answer : Answer: C

A chopper operating at a fixed frequency is feeding an R-L load. As they duty ratio of the chopper is increased...

Description : A chopper operating at a fixed frequency is feeding an R-L load. As they duty ratio of the chopper is increased from 25% to 75%, the ripple in the load current.

Last Answer : Remains constant.

A three-phase star -connected load is operating at a power factor angle ϕ with ϕ being the angle between

Description : A three-phase star -connected load is operating at a power factor angle ϕ  with ϕ being the angle between

Last Answer : A three-phase star -connected load is operating at a power factor angle ϕ  with ϕ being the angle between Phase voltage and phase current

A 3~phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. ...

Description : A 3~phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. The field excitation of the motor is first decreased to zero and then increased in the ... 2) First decrease and then increase, (3) Increases continuously (4) First increase and then decreased

Last Answer : A 3~phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. The field excitation of the motor is first decreased to zero and then increased in the reverse direction. The armature current of the synchronous motor will: Increases continuously.

The angle between the index glass and the horizon glass of a box sextant is 40°; the horizontal angle between the two points sighted by the instruments is : (a) 20° (b) 60° (c) 40° (d) 80°

Description : The angle between the index glass and the horizon glass of a box sextant is 40°; the horizontal angle between the two points sighted by the instruments is : (a) 20° (b) 60° (c) 40° (d) 80°

Last Answer : (a) 20°

Bence-Jones protein precipitates at (A) 20°–40° C (B) 40–-60° C (C) 60°–80° C (D) 80°–100° C

Description : Bence-Jones protein precipitates at (A) 20°–40° C (B) 40–-60° C (C) 60°–80° C (D) 80°–100° C

Last Answer : B

__________ temperature scale assigns 0° to the 'ice point' and 80° to the 'steam point'. (A) Celsius (B) Rankine (C) Reaumur (D) Fahrenheit

Description : __________ temperature scale assigns 0° to the 'ice point' and 80° to the 'steam point'. (A) Celsius (B) Rankine (C) Reaumur (D) Fahrenheit

Last Answer : (C) Reaumur

Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but in certain exceptional organisms they are effective even at temperatures 80° - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Description : Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but ... - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Last Answer : (d) Most enzymes are proteins but some are lipids.

At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Last Answer : (A) 40° and 140

The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is (A) 80° 30' (B) 99° 30' (C) 70° 30' (D) None of these

Description : The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is (A) 80° 30' (B) 99° 30' (C) 70° 30' (D) None of these

Last Answer : (C) 70° 30'

Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Description : Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Last Answer : (D) 105° to 110°C

Customers prefer parking of their vehicles at (A) 90° to aisles (B) 85° to aisles (C) 80° to aisles (D) 75° to aisles

Description : Customers prefer parking of their vehicles at (A) 90° to aisles (B) 85° to aisles (C) 80° to aisles (D) 75° to aisles

Last Answer : Answer: Option D

The optimum cavosurface angle for occlusal amalgam surface is: A. 45-60° B. 70-85° C. 45-80° D. 95-110° E. 130-150°

Description : The optimum cavosurface angle for occlusal amalgam surface is: A. 45-60° B. 70-85° C. 45-80° D. 95-110° E. 130-150°

Last Answer : D. 95-110°

If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is?

Last Answer : If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is 10°.

The voltage at the two ends of a transmission line are 132 KV and its reactance is 40 ohm. The Capacity of the line is (A) 435.6 MW (B) 217.8 MW (C) 251.5 MW (D) 500 MW

Description : The voltage at the two ends of a transmission line are 132 KV and its reactance is 40 ohm. The Capacity of the line is (A) 435.6 MW (B) 217.8 MW (C) 251.5 MW (D) 500 MW

Last Answer : (A) 435.6 MW

If voltage at the two ends of a transmission line is 132 kV and its reactance is 40 Ohms, the capacity of the...

Description : If voltage at the two ends of a transmission line is 132 kV and its reactance is 40 Ohms, the capacity of the line will be: (A) 435.6 MW (B) 217.8 MW(C) 251.5 MW (D) 500 MW

Last Answer : If voltage at the two ends of a transmission line is 132 kV and its reactance is 40 Ohms, the capacity of the line will be: 435.6 MW

A husband and wife are seated facing each other with a barrier between them. Each one takes turns communicating with the other, each speaking only two words at a time. After each two-word message is conveyed, the other person answers with a one-word response. This goes on for some time, until at last, either the husband or his wife suddenly shouts out a four-word phrase which ends this scenario; however, this often causes either the husband or the wife to become angry or frustrated with the person who shouted the four-word phrase. What is going on here? -Riddles

Description : A husband and wife are seated facing each other with a barrier between them. Each one takes turns communicating with the other, each speaking only two words at a time. After each two-word message is ... or frustrated with the person who shouted the four-word phrase. What is going on here? -Riddles

Last Answer : The husband and wife are playing the old game of BATTLESHIP. The two-word communications consist of a letter and a number for the coordinates of where the ships are hidden, and the one-word responses are ... ' or 'Miss'. The final four word phrase which ends the game is, 'You Sank My Battleship!

Will money have value if the world as we know it ends suddenly?

Description : Will money have value if the world as we know it ends suddenly?

Last Answer : answer:Money only has value to the extent the society using it agrees on it as a store of value. So no, it won't. Basic economics, which is the study of how goods and services are transacted between ... society (and the society may be very small or very large) comes to consensus on a store of value.

Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Description : Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Last Answer : D. 166.5˚

If the excitation is increased to one of two alternators operating in parallel, the _____________. A. power factor will change in the lagging direction B. power factor will change in the leading direction C. kilowatt load will be greatly increased D. ampere load will be greatly decreased

Description : If the excitation is increased to one of two alternators operating in parallel, the _____________. A. power factor will change in the lagging direction B. power factor will change in the leading direction C. kilowatt load will be greatly increased D. ampere load will be greatly decreased

Last Answer : Answer: A

If the excitation of an alternator operating in parallel is decreased below normal, its _____________. A. power factor will change in the lagging direction B. power factor will change in the leading direction C. ampere load will be greatly increased D. kilowatt load will be greatly decreased

Description : If the excitation of an alternator operating in parallel is decreased below normal, its _____________. A. power factor will change in the lagging direction B. power factor will change in the leading direction C. ampere load will be greatly increased D. kilowatt load will be greatly decreased

Last Answer : Answer: B

A synchronous motor is operating on no-load at unity power factor. If the field current is increased, power factor will become (A) Leading & current will decrease (B) Lagging & current will increase. (C) Lagging & current will decrease. (D) Leading & current will increase.

Description : A synchronous motor is operating on no-load at unity power factor. If the field current is increased, power factor will become (A) Leading & current will decrease (B) Lagging & current will increase. (C) Lagging & current will decrease. (D) Leading & current will increase.

Last Answer : Ans: A Initially synchronous motor is operating at no load and unity power factor. When field current increases, the excitation will increase. Therefore, p.f will be leading and current will be I CosΦ < I

The standing wave ratio of a 75 Ω transmission line used to feed a 300 Ω resistive load will be _____.

Description : The standing wave ratio of a 75 Ω transmission line used to feed a 300 Ω resistive load will be _____.

Last Answer : The standing wave ratio of a 75 Ω transmission line used to feed a 300 Ω resistive load will be 4.

When the load on a transmission line is equal to the surge impedance loading

Description : When the load on a transmission line is equal to the surge impedance loading  (a) The receiving end voltage is less than the sending end voltage  (b) The sending end voltage is less than the ... is more than the sending end voltage  (d) The receiving end voltage equal to the sending end voltage 

Last Answer : When the load on a transmission line is equal to the surge impedance loading The receiving end voltage equal to the sending end voltage 

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Description : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Last Answer : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is 0.707 lead

A travelling wave of surge resistance, Ro on a transmission line is terminated by a load resistance, RL...

Description : A travelling wave of surge resistance, Ro on a transmission line is terminated by a load resistance, RL. If RL > Ro then there is (A) no reflected wave (B) partial reflection of reversal ... (C) partial reflection of reversal of voltage only (D) reflection of reversal of both current and voltage

Last Answer : A travelling wave of surge resistance, Ro on a transmission line is terminated by a load resistance, RL. If RL > Ro then there is partial reflection of reversal of current only

The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase....

Description : The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase. The disruptive critical voltage is (A) 40 kV (B) 43.6 kV (C) 49.6 kV (D) 50 kV

Last Answer : The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase. The disruptive critical voltage is 40 kV

Draw and explain RC phase shift Oscillator.

Description : Draw and explain RC phase shift Oscillator.

Last Answer : Circuit diagram of RC phase shift oscillator: WORKING: * Circuit consists of a single stage amplifier in common emitter configuration & RC phase shifting network. * R1, R2, RE provides biasing & CE ... . * The phase shift around the loop is 3600 only at one precise frequency.  

In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Last Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

To equalize the power factor of two alternators operating in parallel, the ____________. A. field excitation of both units is adjusted B. governors of both units are adjusted C. phase sequence is altered D. kilowatt load is evenly divided

Description : To equalize the power factor of two alternators operating in parallel, the ____________. A. field excitation of both units is adjusted B. governors of both units are adjusted C. phase sequence is altered D. kilowatt load is evenly divided

Last Answer : Answer: A

A three-phase alternator is operating at 450 volts, 250 amps at 0.6 power factor. If the power factor increases to 0.8, the kw load potential will increase by _____________. A. 38.525 kw B. 116.91 kw C. 155.88 kw D. 194.85 kw

Description : A three-phase alternator is operating at 450 volts, 250 amps at 0.6 power factor. If the power factor increases to 0.8, the kw load potential will increase by _____________. A. 38.525 kw B. 116.91 kw C. 155.88 kw D. 194.85 kw

Last Answer : Answer: A

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a

Description : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

What is the effect on speed if the load is increased on a 3 phase synchronous motor?

Description : What is the effect on speed if the load is increased on a 3 phase synchronous motor?

Last Answer : The speed of operation remains constant from no load to maximum load in the motor operating at constant frequency bus bars.

A three phase induction motor is driving full -load torque which is independent of speed. If the line voltage...

Description : A three phase induction motor is driving full -load torque which is independent of speed. If the line voltage drops to 90% of the rated value, % increase in motor copper losses  (a) 23% (b) -18% (c) 123% (d) None of these

Last Answer : A three phase induction motor is driving full -load torque which is independent of speed. If the line voltage drops to 90% of the rated value, % increase in motor copper losses (a) 23% (b) -18% (c) 123% (d) None of these

A alternator is delivering power to a balanced load at unit power factor. The phase angle between the line...

Description : A alternator is delivering power to a balanced load at unit power factor. The phase angle between the line voltage and the line current is? (A) 90° (B) 60° (C) 30° (D) 0° 

Last Answer : A alternator is delivering power to a balanced load at unit power factor. The phase angle between the line voltage and the line current is 30°

If the operating frequency is 450 MHz what length of a pair of conductors is considered to be a transmission line? A. 2.19 ft B. 2.19 m C. 0.219 ft D. 0.219 m

Description : If the operating frequency is 450 MHz what length of a pair of conductors is considered to be a transmission line? A. 2.19 ft B. 2.19 m C. 0.219 ft D. 0.219 m

Last Answer : C. 0.219 ft

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

The main consideration for operating transmission line at high voltage is

Description : The main consideration for operating transmission line at high voltage is (a) to increase efficiency only. (b) to reduce power loss only. (c) to increase power transmission capability only. (d) All of the above

Last Answer : to reduce power loss: this is because when power is generated, it is generated at a very low voltage but because it is going to be transported over a long distance it is needed to be increase in order to avoid losses on the way such as copper loss and Eddy loss.

How do the upper lockup solenoid and the shift solenoid control gear shifting in an automatic transmission?

Description : How do the upper lockup solenoid and the shift solenoid control gear shifting in an automatic transmission?

Last Answer : They cause the shift valves in the control body to be inoperative.

2004 F-150. Automatic transmission. Shift lever seems to be locked in the Park position. What's the solution for this?

Description : 2004 F-150. Automatic transmission. Shift lever seems to be locked in the Park position. What's the solution for this?

Last Answer : Need Answer