In standard TTL gates, the totem pole output stage is primarily used to

In standard TTL gates, the totem pole output stage is primarily used to

(A) increase the noise margin of the gate

(B) decrease the output switching delay

(C) facilitate a wired OR logic connection

(D) increase the output impedance of the circuit
by

1 Answer

Answer :

In standard TTL gates, the totem pole output stage is primarily used to decrease the output switching delay

by

Related questions

Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Description : Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Last Answer : Ans: A Open collector output.

Why totem pole outputs cannot be connected together.

Description : Why totem pole outputs cannot be connected together.

Last Answer : Totem pole outputs cannot be connected together because such a connection might produce excessive current and may result in damage to the devices.

Explain MOSFET gate drive circuit and totem pole configuration.

Description : Explain MOSFET gate drive circuit and totem pole configuration.

Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

How many minimum number of NOR gates are required to realize a two-input X-OR gate?

Description : How many minimum number of NOR gates are required to realize a two-input X-OR gate?

Last Answer : 5

The complete set of only those Logic Gates designated as Universal Gates is

Description : The complete set of only those Logic Gates designated as Universal Gates is  (A) NOT, OR and AND Gates (B) XNOR, NOR and NAND Gates (C) NOR and NAND Gates (D) XOR, NOR and NAND Gates

Last Answer : The complete set of only those Logic Gates designated as Universal Gates is NOR and NAND Gates

IC which has quad 2 input AND gates

Description : IC which has quad 2 input AND gates   (A) 7411 (B) 7404 (C)7400 (D) 7408

Last Answer : IC which has quad 2 input AND gates 7408

Which of the following gates can be used to realize all possible combinational logic functions?

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

NAND gates are preferred over others because these

Last Answer : NAND gates are preferred over others because these can be used to make any gate.

What are basic gates

Last Answer : AND, OR, NOT, NAND, NOR, XOR and XNOR are the seven basic gates in digital electronics.

Did the Lakota people make totem poles?

Description : Did the Lakota people make totem poles?

Last Answer : NO

What are 2 interesting falsehoods about totem poles?

Description : What are 2 interesting falsehoods about totem poles?

Last Answer : Need answer

How long does it take to build totem animals?

Description : How long does it take to build totem animals?

Last Answer : Need answer

The output of a JK flip-flop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’

Description : The output of a JK flip-flop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions by applying A) J = 0, K = 0 and using a clock B) J = 1, K = 0 and using the clock C) Asynchronous preset input D) J = 1, K = 1 and using the clock 

Last Answer : The output of a JK flip-flop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions by applying J = 1, K = 1 and using the clock 

For a NAND gate, when one or more inputs are low then the output will be

Description :  For a NAND gate, when one or more inputs are low then the output will be A) Low B) High C) Alternately high and low D) High or low depending on relative magnitude of inputs 

Last Answer :  For a NAND gate, when one or more inputs are low then the output will be High 

Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input

Description : Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input clock frequency of 20.48 MHz: (1) 10.24 kHz (2) 5 kHz (3) 30.24 kHz (4) 15 kHz 

Last Answer : Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input clock frequency of 20.48 MHz: 5 kHz

The output of an exclusive–NOR gate is 1. Which input combination is correct?

Description : The output of an exclusive–NOR gate is 1. Which input combination is correct? (1) A = 1, B = 0 (2) A = 0, B = 1 (3) A = 0, B = 0 (4) None of these 

Last Answer : The output of an exclusive–NOR gate is 1. Which input combination is correct? (1) A = 1, B = 0 (2) A = 0, B = 1 (3) A = 0, B = 0 (4) None of these 

Output of NAND gate is 0. for three inputs when:

Description : Output of NAND gate is 0. for three inputs when:

Last Answer : Output of NAND gate is 0. for three inputs when: all the inputs are 1

For the circuit shown in figure, the Boolean expression for the output y in terms of inputs P, Q, R and S is

Description : For the circuit shown in figure, the Boolean expression for the output y in terms of inputs P, Q, R and S is

Last Answer : For the circuit shown in figure, the Boolean expression for the output y in terms of inputs P, Q, R and S is P+Q+R+S

The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.

Description : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is  (A) 4 (B) 6 (C) 8 (D) 10

Last Answer : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is 6

The gate whose output is LOW, if and only if all the inputs are HIGH, is

Description : The gate whose output is LOW, if and only if all the inputs are HIGH, is

Last Answer : The gate whose output is LOW, if and only if all the inputs are HIGH, is NAND

The output of a 2-input NAND gate with high at both the inputs will be

Description : The output of a 2-input NAND gate with high at both the inputs will be • High • Low • High & low • None of the above.

Last Answer : The output of a 2-input NAND gate with high at both the inputs will be Low

A gate in which all inputs must be low to get a high output is called

Last Answer : A gate in which all inputs must be low to get a high output is called A NOR gate.

What is the full form of TTL ?

Description : What is the full form of TTL ?

Last Answer : TTL 's full form Transistor Transistor Logic.

What are the advantages of TTL (transistor transistor logic)?

Description : What are the advantages of TTL (transistor transistor logic)?

Last Answer : To know about the advantages of TTL logic family, one should have a basic idea about RTL, DTL etc. Diode logic (DL) uses diodes to implement logical functions like AND and OR. But the disadvantage is that it can ... delay offered by them, the logic levels may sometimes change i. e. 0 t0 1 or 1 to 0.

Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Description : Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Last Answer : b. Source address

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Last Answer : A. Time to Live (TTL)

What are RTL, DTL, and TTL examples of?

Description : What are RTL, DTL, and TTL examples of?

Last Answer : Logic families.

____ Was more common year: a. CRT b. TTL c. Both A and B d. None of these

Description : ____ Was more common year: a. CRT b. TTL c. Both A and B d. None of these

Last Answer : b. TTL

State advantages and disadvantages of TTL

Description : State advantages and disadvantages of TTL

Last Answer : Advantages: 1. Easily compatible with other ICs 2. Low output impedance

List the different versions of TTL

Description : List the different versions of TTL

Last Answer : 1. TTL (Std.TTL) 2. LTTL (Low Power TTL) 3. HTTL (High Speed TTL) 4. STTL (Schottky TTL) 5. LSTTL (Low power Schottky TTL)

What are the types of TTL logic?

Description : What are the types of TTL logic?

Last Answer : 1. Open collector output 2. Totem-Pole Output 3. Tri-state output.

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Which of following consume minimum power (A) TTL. (B) CMOS. (C) DTL. (D) RTL.

Description : Which of following consume minimum power (A) TTL. (B) CMOS. (C) DTL. (D) RTL.

Last Answer : Ans: B CMOS consumes minimum power as in CMOS one p-MOS & one n-MOS transistors are connected in complimentary mode, such that one device is ON & one is OFF.

Which of the following is the fastest logic? (A) ECL (B) TTL (C) CMOS (D) LSI

Description : Which of the following is the fastest logic? (A) ECL (B) TTL (C) CMOS (D) LSI

Last Answer : (A) ECL

The MSI chip 7474 is (A) Dual edge triggered JK flip-flop (TTL). (B) Dual edge triggered D flip-flop (CMOS). (C) Dual edge triggered D flip-flop (TTL). (D) Dual edge triggered JK flip-flop (CMOS).

Description : The MSI chip 7474 is (A) Dual edge triggered JK flip-flop (TTL). (B) Dual edge triggered D flip-flop (CMOS). (C) Dual edge triggered D flip-flop (TTL). (D) Dual edge triggered JK flip-flop (CMOS).

Last Answer : Ans: C MSI chip 7474 dual edge triggered D Flip-Flop.

The commercially available 8-input multiplexer integrated circuit in the TTL family is (A) 7495. (B) 74153. (C) 74154. (D) 74151.

Description : The commercially available 8-input multiplexer integrated circuit in the TTL family is (A) 7495. (B) 74153. (C) 74154. (D) 74151.

Last Answer : Ans: B MUX integrated circuit in TTL is 74153.

CMOS circuits consume power (A) Equal to TTL (B) Less than TTL (C) Twice of TTL (D) Thrice of TTL

Description : CMOS circuits consume power (A) Equal to TTL (B) Less than TTL (C) Twice of TTL (D) Thrice of TTL

Last Answer : Ans: B As in CMOS one device is ON & one is Always OFF so power consumption is low.

The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Description : The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Last Answer : Ans: A The digital logic family which has the lowest propagation delay time is ECL (Lowest propagation delay time is possible in ECL because the transistors are used in difference amplifier configuration, in which they are never driven into saturation and thereby the storage time is eliminated).

Which of the following is the fastest logic (A) TTL (B) ECL (C) CMOS (D) LSI

Description : Which of the following is the fastest logic (A) TTL (B) ECL (C) CMOS (D) LSI

Last Answer : Ans: B ECL is the fastest logic family of all logic families. (High speeds are possible in ECL because the transistors are used in difference amplifier configuration, in which they are never driven into saturation and thereby the storage time is eliminated.

The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Description : The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Last Answer : (D) CMOS The digital logic family which has minimum power dissipation is CMOS. (CMOS being an unipolar logic family, occupy a very small fraction of silicon Chip area)

TTL logic family is most popularly used industries because it

Description : TTL logic family is most popularly used industries because it  1.provides greater operating speed 2.has a good fan in & fan out 3.has easy interface with other digital circuitry 4.all the above 

Last Answer : It is a basically a bipolar circuit which has TTL band hate fan fan out

TTL stand for :

Description : TTL stand for : A. Trigger Time Logic B. Traffic Time Logic C. Transistor Time Logic D. Transistor Transistor Logic

Last Answer : TTL stand for : Transistor Transistor Logic 

Echinococcus developed metacestode stage in visceral organs of man primarily in D A. Lungs B. Kidney C. Eye D. A and B

Description : Echinococcus developed metacestode stage in visceral organs of man primarily in D A. Lungs B. Kidney C. Eye D. A and B

Last Answer : A and B

When Anderson Motors offers to let qualified buyers test -drive the new Saab, the dealer is primarily trying to stimulate which stage of the product adoption process? A)Awareness B)Interest C)Evaluation D)Trial E)Adoption

Description : When Anderson Motors offers to let qualified buyers test -drive the new Saab, the dealer is primarily trying to stimulate which stage of the product adoption process? A)Awareness B)Interest C)Evaluation D)Trial E)Adoption

Last Answer : D)Trial

At what stage of mitosis cell division does half of the chromosome move towards the North Pole and half towards the South Pole ?

Description : At what stage of mitosis cell division does half of the chromosome move towards the North Pole and half towards the South Pole ?

Last Answer : Answer : In the anaphase stage of mitosis cell division, half of the chromosomes move towards the North Pole and half towards the South Pole.

At what stage do the offspring chromosomes come to the opposite pole ?

Description : At what stage do the offspring chromosomes come to the opposite pole ?

Last Answer : Answer : The offspring chromosomes come to the opposite pole in the step of telophase.

____ structures are typically used in businesses that primarily sell and produce standard products and seldom conduct external projects.

Description : ____ structures are typically used in businesses that primarily sell and produce standard  products and seldom conduct external projects.

Last Answer : Ans. Functional-type organisation

What did businesses primarily invest in to increase production output during the Industrial Revolution?

Description : What did businesses primarily invest in to increase production output during the Industrial Revolution?

Last Answer : Need answer

Operational amplifiers, used primarily in analog circuits, are characterized by ____________. A. high input impedance, high gain and low output impedance B. high input impedance, high gain and high output impedance C. low input impedance, low gain and high output impedance D. low input impedance, high gain and low output impedance

Description : Operational amplifiers, used primarily in analog circuits, are characterized by ____________. A. high input impedance, high gain and low output impedance B. high input impedance, high gain and high output ... gain and high output impedance D. low input impedance, high gain and low output impedance

Last Answer : Answer: A