Maxwell's relation corresponding to the identity, dH = dS = Vdp + ∑μi dni is (A) (∂T/∂V)S, ni = -(∂P/∂S)V, ni (B) (∂S/∂P)T, ni = (∂V/∂T)P, ni (C) (∂S/∂V)T, ni = (∂P/∂T)V, ni (D) (∂T/∂P)S, ni = (∂V/∂S)P, ni

Maxwell's relation corresponding to the identity, dH = dS = Vdp +
∑μi dni
is
(A) (∂T/∂V)S, ni = -(∂P/∂S)V, ni
(B) (∂S/∂P)T, ni = (∂V/∂T)P, ni
(C) (∂S/∂V)T, ni = (∂P/∂T)V, ni
(D) (∂T/∂P)S, ni = (∂V/∂S)P, ni
by

1 Answer

Answer :

(D) (∂T/∂P)S, ni = (∂V/∂S)P, ni
by

Related questions

The Maxwell relation derived from the differential expression for the Helmholtz free energy (dA) is (A) (∂T/∂V)S = - (∂P/∂S)V (B) (∂S/∂P)T = - (∂V/∂T)P (C) (∂V/∂S)P = (∂T/∂P)S (D) (∂S/∂V)T = (∂P/∂T)V

Description : The Maxwell relation derived from the differential expression for the Helmholtz free energy (dA) is (A) (∂T/∂V)S = - (∂P/∂S)V (B) (∂S/∂P)T = - (∂V/∂T)P (C) (∂V/∂S)P = (∂T/∂P)S (D) (∂S/∂V)T = (∂P/∂T)V

Last Answer : (D) (∂S/∂V)T = (∂P/∂T)V

Which of the following identities can be most easily used to verify steam table data for superheated steam? (A) (∂T/∂V)S = (∂p/∂S)V (B) (∂T/∂P)S = (∂V/∂S)P (C) (∂P/∂T)V = (∂S/∂V)T (D) (∂V/∂T)P = -(∂S/∂P)T

Description : Which of the following identities can be most easily used to verify steam table data for superheated steam? (A) (∂T/∂V)S = (∂p/∂S)V (B) (∂T/∂P)S = (∂V/∂S)P (C) (∂P/∂T)V = (∂S/∂V)T (D) (∂V/∂T)P = -(∂S/∂P)T

Last Answer : D) (∂V/∂T)P = -(∂S/∂P)T

The equation relating E, P, V and T which is true for all substances under all conditions is given by (∂E/∂V)T = T(∂P/∂T)H - P. This equation is called the (A) Maxwell's equation (B) Thermodynamic equation of state (C) Equation of state (D) Redlich-Kwong equation of state

Description : The equation relating E, P, V and T which is true for all substances under all conditions is given by (∂E/∂V)T = T(∂P/∂T)H - P. This equation is called the (A) Maxwell's equation (B) Thermodynamic equation of state (C) Equation of state (D) Redlich-Kwong equation of state

Last Answer : (B) Thermodynamic equation of state

Which is not constant for an ideal gas? (A) (∂P/∂V)T (B) (∂V/∂T)P (C) (∂P/∂V)V (D) All (A), (B) & (C)

Description : Which is not constant for an ideal gas? (A) (∂P/∂V)T (B) (∂V/∂T)P (C) (∂P/∂V)V (D) All (A), (B) & (C)

Last Answer : (A) (∂P/∂V)T

Cvis given by (A) (∂E/∂T)V (B) (∂E/∂V)T (C) (∂E/∂P)V (D) (∂V/∂T)P

Description : Cvis given by (A) (∂E/∂T)V (B) (∂E/∂V)T (C) (∂E/∂P)V (D) (∂V/∂T)P

Last Answer : (A) (∂E/∂T)V

On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line (∂P/∂V)s and the slope of the reversible isothermal line (∂P/∂V)T are related as (where, y = Cp/Cv) (A) (∂P/∂V)S = (∂P/∂V)T (B) (∂P/∂V)S = [(∂P/∂V)T]Y (C) (∂P/∂V)S = y(∂P/∂V)T (D) (∂P/∂V)S = 1/y(∂P/∂V)T

Description : On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line (∂P/∂V)s and the slope of the reversible isothermal line ... Y (C) (∂P/∂V)S = y(∂P/∂V)T (D) (∂P/∂V)S = 1/y(∂P/∂V)T

Last Answer : (C) (∂P/∂V)S = y(∂P/∂V)T

(1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Description : (1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Last Answer : (C) co-efficient of thermal expansion

Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Description : Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Last Answer : (A) 0

Uniform fluid flow occurs, when the derivative of the flow variables satisfy the following condition. (A) ∂/∂t = 0 (B) ∂/∂t = constant (C) ∂/∂s = 0 (D) ∂/∂s = constant

Description : Uniform fluid flow occurs, when the derivative of the flow variables satisfy the following condition. (A) ∂/∂t = 0 (B) ∂/∂t = constant (C) ∂/∂s = 0 (D) ∂/∂s = constant

Last Answer : (C) ∂/∂s = 0

Steady fluid flow occurs, when the derivative of flow variables satisfy the following condition. (A) ∂/∂s = 0 (B) ∂/∂t = 0 (C) ∂/∂s = constant (D) ∂/∂t = constant

Description : Steady fluid flow occurs, when the derivative of flow variables satisfy the following condition. (A) ∂/∂s = 0 (B) ∂/∂t = 0 (C) ∂/∂s = constant (D) ∂/∂t = constant

Last Answer : (B) ∂/∂t = 0

The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Description : The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Last Answer : (C) 0

(∂T/∂P)H is the mathematical expression for (A) Specific heat at constant pressure (Cp) (B) Specific heat at constant volume (Cv) (C) Joule-Thompson co-efficient (D) None of these

Description : (∂T/∂P)H is the mathematical expression for (A) Specific heat at constant pressure (Cp) (B) Specific heat at constant volume (Cv) (C) Joule-Thompson co-efficient (D) None of these

Last Answer : (C) Joule-Thompson co-efficient

Joule-Thomson co-efficient is defined as (A) µ = (∂P/∂T)H (B) µ = (∂T/∂P)H (C) µ = (∂E/∂T)H (D) µ = (∂E/∂P)H

Description : Joule-Thomson co-efficient is defined as (A) µ = (∂P/∂T)H (B) µ = (∂T/∂P)H (C) µ = (∂E/∂T)H (D) µ = (∂E/∂P)H

Last Answer : (B) µ = (∂T/∂P)H

The four properties of a system viz. P, V, T, S are related by __________ equation. (A) Gibbs-Duhem (B) Gibbs-Helmholtz (C) Maxwell's (D) None of these

Description : The four properties of a system viz. P, V, T, S are related by __________ equation. (A) Gibbs-Duhem (B) Gibbs-Helmholtz (C) Maxwell's (D) None of these

Last Answer : (C) Maxwell's

Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Description : Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Last Answer : (A) ∆F = ∆H + T [∂(∆F)/∂T]P

Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the Clausius-Clapeyron equation from the following: (A) dP/dT = ∆H/T∆V (B) ln P = - (∆H/RT) + constant (C) ∆F = ∆H + T [∂(∆F)/∂T]P (D) None of these

Description : Pick out the Clausius-Clapeyron equation from the following: (A) dP/dT = ∆H/T∆V (B) ln P = - (∆H/RT) + constant (C) ∆F = ∆H + T [∂(∆F)/∂T]P (D) None of these

Last Answer : B) ln P = - (∆H/RT) + constant

(∂E/∂T)V is the mathematical expression for (A) CV (B) Enthalpy change (C) Free energy change (D) None of these

Description : (∂E/∂T)V is the mathematical expression for (A) CV (B) Enthalpy change (C) Free energy change (D) None of these

Last Answer : (D) None of these

(∂H/∂T)P is the mathematical expression for (A) CV (B) Entropy change (C) Gibbs free energy(D) None of these

Description : (∂H/∂T)P is the mathematical expression for (A) CV (B) Entropy change (C) Gibbs free energy (D) None of these

Last Answer : (D) None of these

Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass?(A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Description : Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass? (A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Last Answer : (A) dE = Tds - PdV

Chemical potential of ith component of a system is given by (A) µi = (∂F/∂ni)T, P, ni (B) µi = (∂A/∂ni)T, P, ni (C) µi = (∂F/∂ni)T, P (D) µi = (∂A/∂ni)T, P

Description : Chemical potential of ith component of a system is given by (A) µi = (∂F/∂ni)T, P, ni (B) µi = (∂A/∂ni)T, P, ni (C) µi = (∂F/∂ni)T, P (D) µi = (∂A/∂ni)T, P

Last Answer : A) µi = (∂F/∂ni)T, P, ni

The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Description : The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Last Answer : (A) A . x22

What is the full form of VDP ?

Description : What is the full form of VDP ?

Last Answer : Village Defense Party in full form of VDP.

Which of the following items is not a path function  (a) heat  (b) work  (c) kinetic energy  (d) vdp  (e) thermal conductivity.

Description : Which of the following items is not a path function  (a) heat  (b) work  (c) kinetic energy  (d) vdp  (e) thermal conductivity.

Last Answer : Answer : e

Why does the AL have the DH and the NL does not?

Description : Why does the AL have the DH and the NL does not?

Last Answer : because the dh is actually hitting for the pictcher in th AL, however in the NL the pitchers bat

Find the Maxwell equation derived from Faraday’s law. a) Div(H) = J b) Div(D) = I c) Curl(E) = -dB/dt d) Curl(B) = -dH/dt

Description : Find the Maxwell equation derived from Faraday’s law. a) Div(H) = J b) Div(D) = I c) Curl(E) = -dB/dt d) Curl(B) = -dH/dt

Last Answer : c) Curl(E) = -dB/dt

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Last Answer : Answer: Option D

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Last Answer : Answer: Option C

What is DH used for? a. Visual maneuvering b. Circling to land c. Precision approaches d. Non-precision approaches

Description : What is DH used for? a. Visual maneuvering b. Circling to land c. Precision approaches d. Non-precision approaches

Last Answer : c. Precision approaches

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and pressure. It is given by (A) (∂E/∂ni)S, v, nj (B) (∂G/∂ni)T, P, nj = (∂A/∂ni) T, v, nj (C) (∂H/∂ni)S, P, nj (D) All (A), (B) and (C)

Description : The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and ... , nj (C) (∂H/∂ni)S, P, nj (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Description : Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Last Answer : According to the formula ΔG° = -nFE° = – 2 × 96500 ×1.05 or ΔG° = -202650 J mol-1 = -202.65 KJ mol-1 Now ΔG° ⇒ -202650 J Mol-1 R = 8.314 J/Mol/K, T = 298 K

If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Description : If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Last Answer : B) Clausius-Clapeyron Equation

Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

"At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Description : "At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Last Answer : (A) Third law of thermodynamics

Which of the following statements describes the significance of ambient temperature in relation to the service life of electronic components? A. Ambient temperature should be as high as possible to drive off moisture. B. Increased ambient temperature decreases the service life of electronic components. C. Ambient temperature is not significant as long as the relative humidity is kept low. D. A reduced ambient temperature causes a corresponding reduced service life.

Description : Which of the following statements describes the significance of ambient temperature in relation to the service life of electronic components? A. Ambient temperature should be as high as possible to drive ... is kept low. D. A reduced ambient temperature causes a corresponding reduced service life.

Last Answer : Answer: B

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. Altitude at which cabin pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Description : Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. ... pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Last Answer : a. The altitude corresponding to cabin pressure regardless of aircraft height

Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. Altitude at which cabin pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Description : Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. ... equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Last Answer : a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter

If the particular proposition of a subaltern relation is false its corresponding universal proposition will be_______. A) true B) false C) both true and false D) doubtful.

Description : If the particular proposition of a subaltern relation is false its corresponding universal proposition will be_______. A) true B) false C) both true and false D) doubtful. 

Last Answer : B) false 

Under which of the following conditions is the relation, `Delta H = Delta E + P Delta V` valid for a system :-

Description : Under which of the following conditions is the relation, `Delta H = Delta E + P Delta V` valid for a system :-

Last Answer : Under which of the following conditions is the relation, `Delta H = Delta E + P ... and pressure D. Constant temperature, pressure and composition

For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by (A) ∂u/∂x = 0 (B) ∂(ρu)/∂x = 0 (C) (∂u/∂x) = - (∂ρ/∂t) (D) ∂ρ/∂t = 0

Description : For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by (A) ∂u/∂x = 0 (B) ∂(ρu)/∂x = 0 (C) (∂u/∂x) = - (∂ρ/∂t) (D) ∂ρ/∂t = 0

Last Answer : (A) ∂u/∂x = 0

As the temperature is lowered towards the absolute zero, the value of ∂(∆F)/∂T, then approaches (A) Unity (B) Zero (C) That of the heat of reaction (D) Infinity

Description : As the temperature is lowered towards the absolute zero, the value of ∂(∆F)/∂T, then approaches (A) Unity (B) Zero (C) That of the heat of reaction (D) Infinity

Last Answer : B) Zero

As the temperature is lowered towards the absolute zero, the value of the quantity (∂∆F/∂T) approaches (A) Zero (B) Unity (C) Infinity (D) None of these

Description : As the temperature is lowered towards the absolute zero, the value of the quantity (∂∆F/∂T) approaches (A) Zero (B) Unity (C) Infinity (D) None of these

Last Answer : (A) Zero

According to Erikson, in which of the following stages do children have the need for working hard, gaining achievement and popularity? a. Industry v/s Inferiority b. Autonomy v/s Shame and Doubt c. Initiative v/s Guilt d. Identity v/s Identity confusion

Description : According to Erikson, in which of the following stages do children have the need for working hard, gaining achievement and popularity? a. Industry v/s Inferiority b. Autonomy v/s Shame and Doubt c. Initiative v/s Guilt d. Identity v/s Identity confusion

Last Answer : a. Industry v/s Inferiority

Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) provided in List-II and select the corr

Description : Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) provided in List-II and select the corr

Last Answer : Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) ... . `{:(P,Q,R,S),(4,1,3,2):}`

Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Description : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Last Answer : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I"," ... (,t. "Zn"("NO"_(3))_(2)):}`

Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Description : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Last Answer : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I"," ... (,t. "Zn"("NO"_(3))_(2)):}`

The Second Chief Election Commissioner of India was – (1) Sukumar Sen (2) S. P. Sen Verma (3) K. V. K Sundaram (4) T. Swaminathan

Description : The Second Chief Election Commissioner of India was – (1) Sukumar Sen (2) S. P. Sen Verma (3) K. V. K Sundaram (4) T. Swaminathan

Last Answer : (3) K. V. K Sundaram Explanation: K.V. K. Sundaram way an Indian civil servant who holds the record as the first Law Secretary (1948-58) of independent India and second Chief Election Commissioner of India (December 20, 1958 - September 30, 1967). Sulcumar Sen (1950-1958) was the first.

Draw dual cycle on P V and T S diagram and write the processes involved in it.

Description : Draw dual cycle on P V and T S diagram and write the processes involved in it. 

Last Answer : 1-2 Isentropic compression of air  2-3 the combustion of fuel at constant volume.  3-4 the combustion of fuel at constant pressure  4-5 Isentropic expansion during which work is done by the system.  5-1 Heat rejection at constant volume.