Why the read of 3 phase voltage is 440?

1 Answer

Answer :

The  read  of  a  phase  voltage  should be approximatly  240v. This  is  because  line  voltage  equals  to quberoot of  phase  voltage.

Related questions

Description : Explain the need and steps to conduct the reduced voltage running up test on the three phase induction motor.

Description : For a balanced three phase star connected load for which line voltage is 230V and per phase resistance and reactance is 6 Ohm and 8 Ohm respectively. Calculate: 1) phase voltage 2) line current 3) power factor 4) total power absorbed

Description : Write the relation between phase and line current, phase and line voltage for Star connection.

Last Answer : Line voltage is equal to root three times of phase voltage and line and phase currents are equal in star connection

Description : What is line voltage and phase voltage? Draw balanced three phase star connected system. Show all the voltages and currents.

Description : Draw the waveform of three phase AC supply voltage.

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

Description : In an alternator at lagging power factor the generated voltage per phase as compared to that at unity power factor?

Last Answer : In an alternator, at lagging power factor the generated voltage per phase as compared to that at unity power factor must be more than terminal voltage.

Description : What is the difference between line and phase voltage?

Last Answer : Line voltage  is  voltage  between two  phases R &Y  (415 v)  while  phase  voltage  is  the  voltage  between  one  phase and  a neutral  B &  N   (240 v).

Description : Explain the principle of ON-OFF control and phase control of AC voltage controller with suitable circuit and waveforms.

Last Answer : The integral cycle control (on-off control) and phase angle control are the two types of AC voltage controller. The principle of ON-OFF control: The on-off control is also called an integral cycle ... control. In phase control, the switch is on for some period of each cycle.  

Description : What is the voltage in 3 phase line?

Last Answer : between 430 to 440 v

Description : The instructions for starting the computer are house on a. Random access memory b. CD-Rom c. Read only memory chip d. All of above

Last Answer : c. Read only memory chip

Description : How to Speed Read

Last Answer : How to Speed Read Got loads of books to finish for your history class tomorrow? Cramming all those information in your head and finishing all those reading materials might seem impossible, but there's ... possible. Just remember these simple tips, and you'll soon know how to speed read efficiently.

Description : How to Read Body Language

Last Answer : How to Read Body Language Body language is the silent language we all need to know and understand. Reading body language correctly will give us accurate clues and hints on what a person ... or another person mirroring your actions means that the person is attracted or is comfortable around you.

Description : How to Read a Ruler

Last Answer : How to Read a Ruler Introduction The ruler is used for various measuring and drawing techniques. You can perform the perfect straight line, build an entertainment center or know that the newly purchased ... or 32 mm. When measuring any object, mark each side carefully to receive an accurate reading.

Description : How to Read a Map

Last Answer : How to Read a Map Reading a map is not just essential in traveling, it's essential in everyday living too. Imagine having to go to an unfamiliar part of the city for a job interview and ... roads into consideration. If you enjoyed reading this article, you'll surely enjoy learning how to use GPS.

Description : How to Teach a Child to Read

Last Answer : How to Teach a Child to Read Most children learn how to read when they are four or five years old, but it doesn't hurt to get them started and hooked on reading. Reading and comprehension are ... up a new world of opportunities for your child to explore in the fabulous and magical world of reading.

Description : How to Read Roman Numerals

Last Answer : How to Read Roman Numerals Roman numerals were how the ancient Romans wrote down numerical values, and a modern version of this numerical system is still used today. Whether it's on that building facade or a costume Roman period movie, here' ... D (500) + C (100) + C (100) + XL (40) + IX (9) = 749.

Description : How to Read Blood Test Results ?

Last Answer : How to Read Blood Test Results When getting your blood tested, you need someone qualified to translate the blood test results for you. However, it's natural that you are interested in your ... diabetic. To lower or remove the risk entirely, doctors will usually prescribe weight loss and exercise.

Description : The average time required to reach a storage location in the memory to read or retrieve the contents of memory is called as A) Turnaround time B) Latency time C) Access time D) Response time

Last Answer : The average time required to reach a storage location in the memory to read or retrieve the contents of memory is called as Access time

Description : How do you read a KWH Meter?

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Last Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

Description : The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Last Answer : In parllpar reasonans RLC circuit the current is

Description : The phase difference between voltage and current wave through a circuit element is given as 30°. The essential condition is that?

Last Answer : The phase difference between voltage and current wave through a circuit element is given as 30°. The essential condition is that both waves must have same frequency.

Description : The power consumed in a circuit element will be least when the phase difference between the current and voltage is?

Last Answer : The power consumed in a circuit element will be least when the phase difference between the current and voltage is 90°.

Description : The underground system cannot be operated above (a) 440 V (b) 11 kV (c) 33 kV (d) 66 kV

Last Answer : (d) 66 kV

Description : The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Last Answer : (c) 230 V

Description : If 1-phase voltage is 220V, why is 3-phase 440V and not 660V ?

Last Answer : Phase voltage =220v /( phase to neutral) Line voltage = 380 v ( phase to phase) Phase angle difference 120° So when two phases reach vmax +ve I.e. (+220v) + (+220v) = 440v that time due ... these event happen very fast. Hence we have 440 v only in three phase motor. √3.phase voltage= 380 v.

Description : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :  (A) 34.64 kVA (B) 75 kVA (C) 20 kVA (D) None of the above

Last Answer : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be : 34.64 kVA

Description : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Last Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Last Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

Description : At a particular instant, the R-phase voltage of a balanced 3-phase system is + 30 V, and the Y-phase voltage is – 90 V. The voltage of B-phase at that instant is (A) + 120 V (B) – 120 V (C) – 60 V (D) + 60 V

Last Answer : At a particular instant, the R-phase voltage of a balanced 3-phase system is + 30 V, and the Y-phase voltage is – 90 V. The voltage of B-phase at that instant is + 60 V

Description : Is it possible for a soil to consist only of one phase?

Description : What is the operation of three phase induction motor

Description : SINGLE PHASE INDUCTION MOTORS MCQ

Last Answer : 101. After the starting winding of a single phase induction motor is disconnected from supply, it continues to run only on (a) running winding (b) rotor winding (c) field winding (d) compensating winding Ans: a ... motor is usually reduced by using (a) gearing (b) belts (c) brakes (d) chains Ans: a

Description : THREE PHASE INDUCTION MOTORS MCQ

Last Answer : 101. Insertion of resistance in the stator of an induction motor (a) increases the load torque (b) decreases the starting torque (c) increases the starting torque (d) none of the above Ans: b

Description : How to Build a Static 3 Phase Converter

Last Answer : How to Build a Static 3 Phase Converter Static 3 phase converters enable offices and residents to conserve energy efficiently. In fact, electricity is available in 3 power phases, which enables ... converter and the necessary appliances that are needed in building the main and the remote appliances.

Description : Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it. 

Last Answer : Circuit Diagram: Waveforms:

Description : State classification of Phase controlled rectifiers.

Last Answer : Classification of phase controlled rectifiers:

Description : Single phase transformer

Last Answer : Single phase Transformer Transformer