Where can I find a good place online that handles aluminum fabrication?

Where can I find a good place online that handles aluminum fabrication?
by

1 Answer

Answer :

Check out Custom Aluminum Works. They specialize in Aluminum Fabrication for fire and rescue vehicles, but they do good work. Aluminum Marine handles aluminum fabrication for boats, but I'm sure they could do some specialized work for you also.
by

Related questions

Does anyone know if Jonathan Wright's story Firehouse Down is true or a fabrication?

Description : Does anyone know if Jonathan Wright's story Firehouse Down is true or a fabrication?

Last Answer : answer:This would not be the first hoax to come from self-described heroes and experts of 9/11. There was another reference recently to another security consultant who claimed to have been ... find that out. But you might ask how the school official has already determined that for himself.

Can somebody recommend any good book on steel structure fabrication?

Description : Can somebody recommend any good book on steel structure fabrication?

Last Answer : Bf is a structural engineer. What type of structures are you interested in and are you looking for info re: bolted or welded? You might try asking on forums like eng-tips.com (think that’s the right URL, might have ta Google) or http://cr4.globalspec.com also.

Which is the Best Steel Fabrication company in Dubai?

Description : Which is the Best Steel Fabrication company in Dubai?

Last Answer : Al Baraq Steel , One of the leading steel fabrication Company in UAE

What are some popular fabrication choices for deer-proof garden fences?

Description : What are some popular fabrication choices for deer-proof garden fences?

Last Answer : There are several companies that provide deer-proof garden fence fabrication. Fabrication choices include polyprophylene.

hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Description : hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Last Answer : You would need to go to a dental school and get certfied as a technition.

What is true, half true, or a complete fabrication we tell students about the first Thanksgiving?

Description : What is true, half true, or a complete fabrication we tell students about the first Thanksgiving?

Last Answer : The history of Thanksgiving touches on just about everything—from fresh venison and questionable bathing habits to “Mary Had a Little Lamb.” And it’s probably a lot more complicated than you think.

The material used in the fabrication of a transistor is – (1) Aluminium (2) Copper (3) Silicon (4) Silver

Description : The material used in the fabrication of a transistor is – (1) Aluminium (2) Copper (3) Silicon (4) Silver

Last Answer : (3) Silicon Explanation: A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power. The first transistors were made from germanium (Ge). ... compound semiconductor material gallium arsenide (GaAs) and the semiconductor alloy silicon germanium (SiGe).

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Last Answer : (A) Welding

Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

Which of the following has the greatest effect on product's reliability and maintenance characteristic? 1. conceptualization 2. product design 3. fabrication 4. a and b

Description : Which of the following has the greatest effect on product's reliability and maintenance  characteristic? 1. conceptualization  2. product design  3. fabrication  4. a and b

Last Answer : 4. a and b

Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Description : Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Last Answer : (C) To obtain higher heat transfer co-efficient and shorter tube

The type of threats on the security of a computer system or network are …………………….. i) Interruption ii)Interception iii) Modification iv) Creation v)Fabrication a) i, ii, iii and iv only b) ii, iii, iv and v only c) i, ii, iii and v only d) All i, ii, iii, iv and v

Description : The type of threats on the security of a computer system or network are …………………….. i) Interruption ii)Interception iii) Modification iv) Creation v)Fabrication a) i, ii, iii and iv only b) ii, iii, iv and v only c) i, ii, iii and v only d) All i, ii, iii, iv and v

Last Answer : c) i, ii, iii and v only

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

How can loss be reduced during construction (or fabrication) of optical fibers?

Description : How can loss be reduced during construction (or fabrication) of optical fibers?

Last Answer : By removing the impurities from optical fiber.

Explain the silicon semiconductor fabrication process.

Description : Explain the silicon semiconductor fabrication process.

Last Answer : Silicon wafer Preparation (2) Epitaxial Growth (2) Oxidation (2) Photolithography (2) Diffusion(2) Ion Implantation (2) Isolation technique (2) Metallization (1) Assembly processing & Packaging (1)

explain with neat diagrams the various CMOS fabrication

Description : explain with neat diagrams the various CMOS fabrication

Last Answer : technology P-well process (4) N-well process (4) Silicon-On-Insulator Process (4) Twin- tub Process (4)

Give the basic process for IC fabrication

Description : Give the basic process for IC fabrication

Last Answer : _ Silicon wafer Preparation _ Epitaxial Growth _ Oxidation _ Photolithography _ Diffusion _ Ion Implantation _ Isolation technique _ Metallization _ Assembly processing & Packaging

How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Description : How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Last Answer : b) The fabrication specification/WPS will give the requirements

In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Description : In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Last Answer : A. Contour the wax as part of the fabrication of the working cast

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Description : Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Last Answer : A. Minimise distortion

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

The type of threats on the security of a computer system or network are …………………….. i) Interruption ii) Interception iii) Modification iv) Creation v) Fabrication A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, ii, iii and v only D) All i, ii, iii, iv and v

Description : The type of threats on the security of a computer system or network are …………………….. i) Interruption ii) Interception iii) Modification iv) Creation v) Fabrication A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, ii, iii and v only D) All i, ii, iii, iv and v

Last Answer : C) i, ii, iii and v only

The information in ROM is stored (A) By the user any number of times. (B) By the manufacturer during fabrication of the device. (C) By the user using ultraviolet light. (D) By the user once and only once.

Description : The information in ROM is stored (A) By the user any number of times. (B) By the manufacturer during fabrication of the device. (C) By the user using ultraviolet light. (D) By the user once and only once.

Last Answer : (B) By the manufacturer during fabrication of the device.

What is the name of the white clay which has been used for thousands of years in the fabrication of ceramic bodies? Is it: w) Talc x) Kaolin y) Feldspar z) Quartz

Description : What is the name of the white clay which has been used for thousands of years in the fabrication of ceramic bodies? Is it: w) Talc x) Kaolin y) Feldspar z) Quartz

Last Answer : ANSWER: X -- KAOLIN

The material used in the fabrication of a transistor is (1) Aluminium (2) Copper (3) Silicon (4) Silver

Description : The material used in the fabrication of a transistor is (1) Aluminium (2) Copper (3) Silicon (4) Silver

Last Answer : Silicon

fabrication of semiconductor device and describe its need.

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Last Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

Explain fabrication using N-well process.

Description : Explain fabrication using N-well process.

Last Answer : N-Well process: The N-well CMOS circuits are getting more popular because of the lower substrate bias effect on transistor threshold voltage and lower parasitic capacitances associated with source ... overall passivation layer is formed and the openings for accessing bonding pads are defined. 

State any one process for wafer fabrication with diagram

Description : State any one process for wafer fabrication with diagram

Last Answer : Wafer Processing: The basis raw material used is a disk of silicon, which is between 75 mm to 150 mm in diameter and is less than 1mm thick used in semi-conductor plants. Wafers are cut ... Following slicing at least one face of the wafer is polished to flat scratch free mirror finish surface.

What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction

Description : What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction transistor? 1. Emitter diffusion 2. Base diffusion 3. Buried layer formation 4. Epi-layer formation Select the correct answer using the codes given ... 2) 4, 3, 1, 2 (3) 3, 4, 2, 1 (4) 4, 3, 2, 1 

Last Answer : What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction transistor? 1. Emitter diffusion 2. Base diffusion 3. Buried layer formation 4. Epi-layer formation Select the correct answer using the codes ... ) 4, 3, 1, 2 (3) 3, 4, 2, 1 (4) 4, 3, 2, 1 

When did they stop putting handles on mattresses?

Description : When did they stop putting handles on mattresses?

Last Answer : Gosh…you’re right. I didn’t really realize that.

Any recommendations for toning lower back, glutes, and love handles?

Description : Any recommendations for toning lower back, glutes, and love handles?

Last Answer : answer:This will get you in shape and tone you using your own body weight, a 7 minute workout. That will strengthen your core.

Would you ever adopt one of your internet handles as your legal name?

Description : Would you ever adopt one of your internet handles as your legal name?

Last Answer : answer:Hmmmm…Yet Another User…Yet A. User…Yet User…Mr. User…Uncle Yet… I’m not sure if I could ever get used to that!

When someone buys their car at the end of a lease can the dealership who handles it charge whatever they want in fees?

Description : When someone buys their car at the end of a lease can the dealership who handles it charge whatever they want in fees?

Last Answer : Call back and ask the salesman to list the “other fees” and how much they are. Write them down. Then you can do your due dilligence. Don’t allow him to be vague.

Do you believe a police officer's education plays a part in how he handles the public?

Description : Do you believe a police officer's education plays a part in how he handles the public?

Last Answer : I’m sure it’s a factor, but only one of many. The requirement is probably more to do with having an arbitrary way of filtering out too many applicants.

How do I make steel knife handles less slippery?

Description : How do I make steel knife handles less slippery?

Last Answer : answer:Maybe you can somehow add a rubber grip to the handle. Some stores may customize one for you, or they might have premade ones for certain models. EDIT I think they have some that you freely take on and off, so it’s not gonna ruin the knife handle like taping it would.

Why do maple syrup bottles have small handles?

Description : Why do maple syrup bottles have small handles?

Last Answer : Most (real) maple syrup jugs are not that big. Creating a small handle that is the height of the neck and doesn’t stick out past the edge of the jug makes it more efficient and cost-effective for packaging.

What illnesses have you gotten from grocery store cart handles?

Description : What illnesses have you gotten from grocery store cart handles?

Last Answer : answer:@Aster We don't think it was from a grocery cart, but a computer keyboard: My husband came home and nearly died from meningitis. Almost no one disinfects their keyboard and rarely do people ... scratching themselves, etc. My husband had to learn the hard way that he needed to protect himself.

Exercises for losing thigh fat & love handles?

Description : Exercises for losing thigh fat & love handles?

Last Answer : You can’t spot reduce. You can do exercises to tone those muscles, but only aerobic exercise will burn excess fat. That and cleaning up your diet.

Are love handles on a girl a bad thing?

Description : Are love handles on a girl a bad thing?

Last Answer : No, it’s nice to have something to hold on to. Real women have curves, they don’t look like 12 year old boys.

Is it rude that I use a napkin or toilet paper to touch bathroom handles in public or other people's houses?

Description : Is it rude that I use a napkin or toilet paper to touch bathroom handles in public or other people's houses?

Last Answer : As long as you have not used the toilet paper first, no offense here.

Any good websites/books to learn what anyone who handles human remains on a regular basis really deals with?

Description : Any good websites/books to learn what anyone who handles human remains on a regular basis really deals with?

Last Answer : hiya, I spent six years in that field! Once I get on my computer and am not typing on my phone, I’ll offer up some suggestions.

Will "bakelite" handles on flatware get yucky over time?

Description : Will "bakelite" handles on flatware get yucky over time?

Last Answer : answer:Yup. Yucky if you are referring to becoming discolored and cracked. They still work, until they crack and fall apart and all of ours did after several years. Maybe you should go with stainless steel ... wouldn't go this way and I think it's the dishwasher that ruins the bakelite. Good luck!

How do I get rid of love handles (aka my biscuits)?

Description : How do I get rid of love handles (aka my biscuits)?

Last Answer : Lay on your stomach with your arms extended forward above your head. Raise your right arm and your left leg at the same time, put them back down, then your left arm and your right leg. Repeat ad nauseum.

Best way to get rid of love handles and cellulite in the butt area?

Description : Best way to get rid of love handles and cellulite in the butt area?

Last Answer : lipo

A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Description : A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Last Answer : a.Automated storage and retrieval system (AS/RS)