Why Make sure your hands are dry when using electrical equipment?

Why Make sure your hands are dry when using electrical equipment?
by

1 Answer

Answer :

Need answer
by

Related questions

What safety actions does the nurse need to take for a patient on oxygen therapy who is undergoing magnetic resonance imaging (MRI)? a) Ensure that no patient care equipment containing metal enters the room where the MRI is located. For patient safety the nurse must make sure no patient care equipment (e.g., portable oxygen tanks) that contains metal or metal parts enters the room where the MRI is located. The magnetic field generated by the unit is so strong that any metal-containing items will be strongly attracted and can literally be pulled away with such great force that they can fly like projectiles towards the magnet.

Description : What safety actions does the nurse need to take for a patient on oxygen therapy who is undergoing magnetic resonance imaging (MRI)? a) Ensure that no patient care equipment containing metal enters the ... oxygen tanks) that contains metal or metal parts enters the room where the MRI is located.

Last Answer : a) Ensure that no patient care equipment containing metal enters the room where the MRI is located. For patient safety the nurse must make sure no patient care equipment (e.g., portable oxygen ... literally be pulled away with such great force that they can fly like projectiles towards the magnet.

Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components with a soft cotton rag. B. Blowing a high velocity stream of compressed air rapidly across the components. C. Using a vacuum cleaner to remove debris from the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Description : Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components ... the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Last Answer : Answer: C

What type of personal protective equipment used in labs protects hands?

Description : What type of personal protective equipment used in labs protects hands?

Last Answer : Any kind of gloves will protect the worker in a lab. Heavygloves are used for hot objects and 'rubber' gloves are used forany thing that might contaminate the person. For example, whenworking with bacteria, it is a very good idea.

I had my wisdom teeth taken out over a month ago and I'm not sure if I developed a dry socket or not?

Description : I had my wisdom teeth taken out over a month ago and I'm not sure if I developed a dry socket or not?

Last Answer : Dry socket hurts a lot. Treatment for dry socket is to scrape it until it bleeds, and let the clot hang out in there. That white thing may be a thread of suture.

Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding temperature with an accurate mercury thermometer C. periodic cleaning of the winding insulation with an approved solvent D. making sure that the units are close to bulkheads or corners to protect them from damage

Description : Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding ... . making sure that the units are close to bulkheads or corners to protect them from damage

Last Answer : Answer: A

What in your opinion and experience is the best hand cream, or item, to get for dry hands?

Description : What in your opinion and experience is the best hand cream, or item, to get for dry hands?

Last Answer : I like Bath and Body Works body cream. I mostly use it for my hands but have applied it all over before.

Do you have a tried and true remedy for dry, split hands?

Description : Do you have a tried and true remedy for dry, split hands?

Last Answer : answer:I have tried several different creams but the best stuff I have found is Udder Balm. You can also get different brands. I find the thicker the better, The thin stuff that you can buy in the ... . We use it when we are rafting and your hands and feet split from constant contact with the wet.

Why do my hands burn after putting lotion on them when they've been really dry?

Description : Why do my hands burn after putting lotion on them when they've been really dry?

Last Answer : When your hands get extremely dry, tiny cracks form on the surface of your skin. That's why it hurts when you have dry hands, and you move them, you're stretching out the little cuts. When you put ... on them, then it's basically like you're rubbing the lotion into a bunch of teeny tiny cuts. Ouch.

Where can I buy "Dry Touch Hands" in San Francisco?

Description : Where can I buy "Dry Touch Hands" in San Francisco?

Last Answer : answer:In San Francisco, or anywhere, I imagine, it can be purchased online or via mailorder, here: http://www.drytouchhands.com/ Contacting their Customer Service Dept. should yield a list of stores ... pay the necessary charges for USPS Express Mail, or via the overnight services of UPS or FedEx.

What's good for dry hands?

Description : In the cold of winter, my hands always dry out! Do you know any solution?

Last Answer : Apply body lotion or hand cream 2-3 times a day and wear gloves in the cold

Dry hands - will you advise?

Description : I've been bothered by really dry hands lately, I've tried a lot of different creams that will always help me just for a while. I would like to try some homemade ointment, does anyone have a good recipe? thanks :)

Last Answer : You need to delete more often. The best thing is lard.

What is method of mounting electrical equipment to various surface?

Description : What is method of mounting electrical equipment to various surface?

Last Answer : You have to be more specific. Mounting details differ fromequipment to equipment

What is method of mounting electrical equipment to various surface?

Description : What is method of mounting electrical equipment to various surface?

Last Answer : You have to be more specific. Mounting details differ fromequipment to equipment

When maintenance personnel are working on electrical equipment, all supply switches should be secured in the open position and tagged specifically by the _____________. A. watch engineer B. chief engineer or first assistant C. chief electrician D. person performing the repair

Description : When maintenance personnel are working on electrical equipment, all supply switches should be secured in the open position and tagged specifically by the _____________. A. watch engineer B. chief engineer or first assistant C. chief electrician D. person performing the repair

Last Answer : Answer: D

Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. Secure and tag the supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Description : Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. ... supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Last Answer : Answer: C

Which of the spaces listed is defined as a 'location requiring an exceptional degree of protection' when considering the installation of shipboard electrical equipment? A. Machinery space B. Chart room C. Console room D. Accommodation space

Description : Which of the spaces listed is defined as a 'location requiring an exceptional degree of protection' when considering the installation of shipboard electrical equipment? A. Machinery space B. Chart room C. Console room D. Accommodation space

Last Answer : Answer: A

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: C

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Last Answer : Answer: A

Air gap readings should be taken on electrical generation equipment periodicly to ________. I. check machine effeciency II. determine the need for cleaning A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings should be taken on electrical generation equipment periodicly to ________. I. check machine effeciency II. determine the need for cleaning A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: D

Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Description : Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Last Answer : Answer: D

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the machine secured B. millivolt meter and a jumper with the machine running C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the ... C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Last Answer : Answer: B

Which of the following should be the FIRST step in removing a generator from parallel operation? A. Trip the generator off the switchboard. B. Turn off all electrical equipment. C. Remove the load from the 'off going' generator. D. Increase the cycles of the generator staying on the line.

Description : Which of the following should be the FIRST step in removing a generator from parallel operation? A. Trip the generator off the switchboard. B. Turn off all electrical equipment. C. Remove the load from the 'off going' generator. D. Increase the cycles of the generator staying on the line.

Last Answer : Answer: C

When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment away. B. Measure capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Description : When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment ... capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Last Answer : Answer: C

A wattmeter is used to determine ____________. A. the power being consumed by electrical equipment B. partial circuit resistance C. current flowing in a circuit D. voltage existing between two points in a circuit

Description : A wattmeter is used to determine ____________. A. the power being consumed by electrical equipment B. partial circuit resistance C. current flowing in a circuit D. voltage existing between two points in a circuit

Last Answer : Answer: A

An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. The maximum allowable operating temperature of the machine. B. The temperature of the machine at the time the resistance reading was taken. C. The normal temperature rise of the machine. D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Description : An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. ... D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Last Answer : Answer: B

Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap silica gel around the commutator. C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Description : Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap ... C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Last Answer : Answer: C

The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Description : The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Last Answer : Answer: B

Maximum consumption of copper is in (A) Utensil manufacture (B) Electrical industry (C) Industrial equipment manufacture

Description : Maximum consumption of copper is in (A) Utensil manufacture (B) Electrical industry (C) Industrial equipment manufacture

Last Answer : (B) Electrical industry

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Description : What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Last Answer : Bureau of energy efficiency.

To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Description : To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

When working on electrical equipment, why should you use only one hand?

Description : When working on electrical equipment, why should you use only one hand?

Last Answer : . To minimize the probability of providing a path for current through your body.

Before working on electrical equipment containing capacitors, what should you do to the capacitors?

Description : Before working on electrical equipment containing capacitors, what should you do to the capacitors?

Last Answer : Discharge them by shorting them to ground.

What are some examples of electrical equipment which use magnetism?

Description : What are some examples of electrical equipment which use magnetism?

Last Answer : Motors, generators, speakers, computers, televisions, tape recorders, and many others

What should you do if you become aware of a possible malfunction in a piece of electrical equipment?

Description : What should you do if you become aware of a possible malfunction in a piece of electrical equipment?

Last Answer : You should immediately report this condition to a qualified technician

Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Description : Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Last Answer : (D) Light weight permanent magnets.

What are the main electrical equipment used in HPS ? State the function of each parts of it in brief.

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Last Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.  

To protect most of the electrical equipment handling low power, the types of relays used are?

Last Answer : To protect most of the electrical equipment handling low power, the types of relays used are thermocouple, electronic and bimetallic.

Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Description : Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Last Answer : (B) Filter thickener

Which equipment is used for weeding in Row crops in rain fed. a) Puddy cono weeder b) Engine operated weeder c) Dry land weeder d) Seed drill

Description : Which equipment is used for weeding in Row crops in rain fed. a) Puddy cono weeder b) Engine operated weeder c) Dry land weeder d) Seed drill

Last Answer : Dry land weeder

equipment is used for wedding in between rows of standing crops. a) Engine operated weeder b) Cono weeder for puddy c) Junior how d) Dry land weeder

Description : equipment is used for wedding in between rows of standing crops. a) Engine operated weeder b) Cono weeder for puddy c) Junior how d) Dry land weeder

Last Answer : Junior how

When using the bathroom in a public place (restaurant, work, store, etc.), do you check the toilet seat after using and make sure it appears clean before exiting the stall?

Description : When using the bathroom in a public place (restaurant, work, store, etc.), do you check the toilet seat after using and make sure it appears clean before exiting the stall?

Last Answer : I do. It’s automatic, for me.

Before using a volt-ohmmeter to measure resistance readings, you should _____________. A. replace all batteries B. test the insulation resistance of the leads C. make sure the test leads do not touch D. hold the leads together and 'zero' the meter

Description : Before using a volt-ohmmeter to measure resistance readings, you should _____________. A. replace all batteries B. test the insulation resistance of the leads C. make sure the test leads do not touch D. hold the leads together and 'zero' the meter

Last Answer : Answer: D

Which of the following is true? A. You can leverage paid advertising to put your best content in front of the right target audience. B. Before creating more social media platforms, B2C content marketers should make sure that they're using Facebook, YouTube, and Twitter as effectively as possible. C. To make your social media content an effective B2C marketing tactic, you should understand the unique characteristics of each social platform you consider working with. D. All of the above

Description : Which of the following is true? A. You can leverage paid advertising to put your best content in front of the right target audience. B. Before creating more social media platforms, B2C ... the unique characteristics of each social platform you consider working with. D. All of the above

Last Answer : D. All of the above

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C