What is A process where manufacturers pull defective products from the market is known as?

What is A process where manufacturers pull defective products from the market is known as?
by

1 Answer

Answer :

What is the answer ?
by

Related questions

When troubleshooting a motor controller, all indications are that a relay coil should be energized. If there were no magnetic pull, with rated voltage measured across the coil, the most probable cause would be that the _________________. A. coil is open B. control fuse is open C. auxiliary contact in series with the coil is defective D. relay armature is stuck

Description : When troubleshooting a motor controller, all indications are that a relay coil should be energized. If there were no magnetic pull, with rated voltage measured across the coil, the most probable cause ... open C. auxiliary contact in series with the coil is defective D. relay armature is stuck

Last Answer : Answer: A

The channel that includes both a manufacturers' agent and an industrial distributor may be appropriate under which of the following circumstances? A)When the firm wants specialised personnel to follow up the work of the sales force B)When the marketer wishes to enter a new geographic market but does not wish to expand the existing sales force C)When only one or two channels of distribution are available for products D)When the sales force is large and the marketer is thinking of cutting it down E)When customers are highly concentrated in one geographic area

Description : The channel that includes both a manufacturers' agent and an industrial distributor may be appropriate under which of the following circumstances? A)When the firm wants specialised personnel to follow ... is thinking of cutting it down E)When customers are highly concentrated in one geographic area

Last Answer : B)When the marketer wishes to enter a new geographic market but does not wish to expand the existing sales force

Air-tech management learns that last month's production run of heaters is defective and announces a recall of the specific models produced. To handle the large number of products it expects to receive for replacement, Air -tech will probably need to add a __________ to its distribution network. A)distribution centre B)private warehouse C)dispatching shipment system D)public warehouse E)materials handling system

Description : Air-tech management learns that last month's production run of heaters is defective and announces a recall of the specific models produced. To handle the large number of products ... distribution centre B)private warehouse C)dispatching shipment system D)public warehouse E)materials handling system

Last Answer : D)public warehouse

What are the major challenges facing the automotive vehicle manufacturers and product industry with the introduction of electric vehicles into the consumer market?

Description : What are the major challenges facing the automotive vehicle manufacturers and product industry with the introduction of electric vehicles into the consumer market?

Last Answer : answer:It's creative destruction, as applied by Schumpeter. The automotive industry is huge. There are thousands of companies the average consumer knows nothing about, but that play a vital ... the overall effect would be positive. Innovation is good, particularly if it benefits the environment.

Now the Indian and British manufacturers tried to expand their market ? -SST 10th

Description : Now the Indian and British manufacturers tried to expand their market ? -SST 10th

Last Answer : They tried to expand their market through advertisements.

How did the British manufacturers attempt to take over the Indian market with the help of advertisements ? -SST 10th

Description : How did the British manufacturers attempt to take over the Indian market with the help of advertisements ? -SST 10th

Last Answer : (i) When Manchester industrialists began selling cloth in India, they put labels on the cloth bundles. The label served two purposes. One was to make the place of manufacture and the name of the ... not read. Advertisement could be seen day after day, throughout the year, when hung on the walls.

What does the acronym FMCG refer to ? 1. Functional, mid-riced, or compulsory goods 2. Famous, manufacturer's clothing goods (i.e., designer labels) 3. Fast Moving Consumer Goods 4. Frequent Market Consumption Goods 5. None of thes

Description : What does the acronym FMCG refer to ? 1. Functional, mid-riced, or compulsory goods 2. Famous, manufacturer's clothing goods (i.e., designer labels) 3. Fast Moving Consumer Goods 4. Frequent Market Consumption Goods 5. None of thes

Last Answer : Fast Moving Consumer Goods

The reseller market mainly consists of A. Consumers B. Manufacturers C. Wholesalers and retailers D. Industrial users

Description : The reseller market mainly consists of A. Consumers B. Manufacturers C. Wholesalers and retailers D. Industrial users

Last Answer : C. Wholesalers and retailers

If Wrigley’s makes all the world's bubble gum but sells it through middlemen who market under individual store brands, Wrigley’s is utilizing which type of brand sponsorship? A. Manufacturer's brand B. Slotting brand C. Private brand D. Licensed brand E. Dealer brand.

Description : If Wrigley’s makes all the world's bubble gum but sells it through middlemen who market under individual store brands, Wrigley’s is utilizing which type of brand sponsorship? A. Manufacturer's brand B. Slotting brand C. Private brand D. Licensed brand E. Dealer brand.

Last Answer : C. Private brand

4) The channel that includes both a manufacturer's agent and an industrial distributor may be appropriate under which of the following circumstances? A)When a marketer wishes to enter a new geographic market but does not wish to expand the existing sales force B)When the sales force is large and the marketer is thinking of cutting it down C)When customers are highly concentrated in one geographic area

Description : 4) The channel that includes both a manufacturer's agent and an industrial distributor may be appropriate under which of the following circumstances? A)When a marketer wishes to enter a new ... marketer is thinking of cutting it down C)When customers are highly concentrated in one geographic area

Last Answer : A)When a marketer wishes to enter a new geographic market but does not wish to expand the existing sales force

Through marketing newsprint to newspaper publishers and glass manufacturers that use it in packaging, Consolidated Bathurst segments its market based on: A)customer size B)psychographics C)demographics D)use of product E)geographic location

Description : Through marketing newsprint to newspaper publishers and glass manufacturers that use it in packaging, Consolidated Bathurst segments its market based on: A)customer size B)psychographics C)demographics D)use of product E)geographic location

Last Answer : D)use of product

British Steel provides steel to various manufacturers in Britain. British Steel would most likely segment markets based on which one of the following variables: A)Demographic B)Psychographic C)Type of organisation D)Socio-economic E)Market density

Description : British Steel provides steel to various manufacturers in Britain. British Steel would most likely segment markets based on which one of the following variables: A)Demographic B)Psychographic C)Type of organisation D)Socio-economic E)Market density

Last Answer : C)Type of organisation

For the technically minded, can anyone explain the rationale around the urge for television manufacturers to skimp on the audio quality of their products.

Description : For the technically minded, can anyone explain the rationale around the urge for television manufacturers to skimp on the audio quality of their products.

Last Answer : I would have thought it comes down to size. CRT’s had a bigger housing so there was more space for speakers. Bigger speakers produce more sound. Flat screen TV’s have a much smaller footprint and there seems to be a race to produce thinner and thinner displays leaving much less space for speakers.

Should the state require that car manufacturers place images of gruesome, fatal accidents on their product's bodywork?

Description : Should the state require that car manufacturers place images of gruesome, fatal accidents on their product's bodywork?

Last Answer : answer:That is a great idea. I would be all for it. I would go one step further: replace the horn sound with the scream of a group of small children being crushed by a car. https://youtu.be/DMG-eN1iibY?t=40

What If you are in the custom printing and packaging business, how would you make marketing relations with the local sectors, for example, a local fashion wear store or a local restaurant or maybe a local beauty products manufacturers?

Description : What If you are in the custom printing and packaging business, how would you make marketing relations with the local sectors, for example, a local fashion wear store or a local restaurant or maybe a local beauty products manufacturers?

Last Answer : As the name demonstrates, twofold divider plate boxes are the absolute most bolted and defensive bundling for your sensitive and prepared to-dispatch items.They are modified dependent on the necessities of ... Tray Box in Bulk, Visit the link below:"thecustomboxes.co.uk/boxstyles/double-wall-tray/"

Which hard drive manufacturers make the most dependable products?

Description : Which hard drive manufacturers make the most dependable products?

Last Answer : Seagate makes excellent products, as does Western Digital.

Industrial exit policy means - (1) forcing foreign companies to leave India (2) forcing business units to move out of congested localities (3) allowing manufacturers to shift their line of products (4) allowing business units to close down

Description : Industrial exit policy means - (1) forcing foreign companies to leave India (2) forcing business units to move out of congested localities (3) allowing manufacturers to shift their line of products (4) allowing business units to close down

Last Answer : (4) allowing business units to close down Explanation: The term 'exit' is the obverse of the term 'entry' into industry. It refers to the right or ability of an industrial unit ... 1991 when it was felt that without labor market flexibility, efficient industrialization would be difficult to achieve.

A manufacturer owned middleman that sells products and provides support services for the manufacturer's sales force is called a sales ___________ 1. branch 2. office 3. manager 4. broker 5. agent

Description : A manufacturer owned middleman that sells products and provides support services for the manufacturer's sales force is called a sales ___________ 1. branch 2. office 3. manager 4. broker 5. agent

Last Answer : branch

The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to 1. tighten its control over distribution of its products 2. discourage competition from other manufacturers 3. incorporate selective distribution 4. contain costs 5. none of these

Description : The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to 1. tighten its control over distribution of its products 2. ... other manufacturers 3. incorporate selective distribution 4. contain costs 5. none of these

Last Answer : tighten its control over distribution of its products

The perception of price depends on A)a product's actual price and consumers' expectations regarding price. B)a consumer's analysis of competitive prices. C)a consumer's expectation of price. D)a product's actual price compared with the manufacturer's suggested price.

Description : The perception of price depends on A)a product's actual price and consumers' expectations regarding price. B)a consumer's analysis of competitive prices. C)a consumer's expectation of price. D)a product's actual price compared with the manufacturer's suggested price.

Last Answer : A)a product's actual price and consumers' expectations regarding price.

Physical distribution A)is concerned mainly with speed of delivery. B)is used only by manufacturers. C)involves the movement of products from producers to end users. D)is primarily the wholesaler's responsibility.

Description : Physical distribution A)is concerned mainly with speed of delivery. B)is used only by manufacturers. C)involves the movement of products from producers to end users. D)is primarily the wholesaler's responsibility.

Last Answer : C)involves the movement of products from producers to end users.

A manufacturer -owned middleman that sells products and provides support services for the manufacturer's sales force is called a sales A)branch. B)office. C)manager. D)broker. E)agent.

Description : A manufacturer -owned middleman that sells products and provides support services for the manufacturer's sales force is called a sales A)branch. B)office. C)manager. D)broker. E)agent.

Last Answer : A)branch

Many food brokers are more accurately described as manufacturers' agents because they A)handle food products from a single manufacturer. B)provide assistance in grading, negotiating, and inspecting foods. C)have specialised knowledge of a particular commodity. D)provide services on a somewhat permanent basis and operate in specific geographic territories. E)charge higher commissions than most other brokers.

Description : Many food brokers are more accurately described as manufacturers' agents because they A)handle food products from a single manufacturer. B)provide assistance in grading, negotiating, and ... and operate in specific geographic territories. E)charge higher commissions than most other brokers.

Last Answer : D)provide services on a somewhat permanent basis and operate in specific geographic territories

The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to A)tighten its control over distribution of its products. B)discourage competition from other manufacturers. C)incorporate selective distribution. D)contain costs.

Description : The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to A)tighten its control over distribution of its products. B)discourage competition from other manufacturers. C)incorporate selective distribution. D)contain costs.

Last Answer : A)tighten its control over distribution of its products.

Tying agreements occur when a A)producer distributes the same product through two or more different channel structures. B)manufacturer forbids an intermediary to carry products of competing manufacturers. C)supplier furnishes a product to a channel member stipulating that the channel member must purchase other products as well. D)producer refuses to deal to channel members that seem unethical or illegitimate.

Description : Tying agreements occur when a A)producer distributes the same product through two or more different channel structures. B)manufacturer forbids an intermediary to carry products of competing manufacturers. C ... well. D)producer refuses to deal to channel members that seem unethical or illegitimate.

Last Answer : C)supplier furnishes a product to a channel member stipulating that the channel member must purchase other products as well.

A(n) __________ is an independent business that sells complementary products of several producers in assigned territories and is compensated through commissions. A)industrial distributor B)production agent C)wholesaler D)manufacturers' agent E)producer

Description : A(n) __________ is an independent business that sells complementary products of several producers in assigned territories and is compensated through commissions. A)industrial distributor B)production agent C)wholesaler D)manufacturers' agent E)producer

Last Answer : D)manufacturers' agent

Industrial exit policy means (1) forcing foreign companies to leave India (2) forcing business units to move out of congested localities (3) allowing manufacturers to shift their line of products (4) allowing business units to close down

Description : Industrial exit policy means (1) forcing foreign companies to leave India (2) forcing business units to move out of congested localities (3) allowing manufacturers to shift their line of products (4) allowing business units to close down

Last Answer : allowing business units to close down

An article manufactured by a company consists of two parts X and Y. In the process of manufacture of the part X, 9 out of 100 parts may be defective. -Maths 9th

Description : An article manufactured by a company consists of two parts X and Y. In the process of manufacture of the part X, 9 out of 100 parts may be defective. -Maths 9th

Last Answer : (b) \(rac{1}{4}\)Since A and B are mutually exclusive and exhaustive events, therefore, P(A ∩ B) = 0, P(A ∪ B) = 1 We know that, P(A ∪ B) = P(A) + P(B) - P(A ∩ B) ⇒ 1 = P(A) + 3 P(A) (Given P(B) ... ∵ P(A) + P(B) = 1)⇒ P(\(\bar{B}\)) = 1 - P(B) = 1 - \(rac{3}{4}\) = \(rac{1}{4}\).

6. Budgeted sales of X for March are 18000 units. At the end of the production process for X, 10% of production units are scrapped as defective. Opening inventories of X for March are budgeted to be 15000 units and closing inventories will be 11,400 units. All inventories of finished goods must have successfully passed the quality control check. The production budget for X for March, in units is:

Description : 6. Budgeted sales of X for March are 18000 units. At the end of the production process for X, 10% of  production units are scrapped as defective. Opening inventories of X for March are ... have successfully  passed the quality control check. The production budget for X for March, in units is:

Last Answer : (d) 16,000

What Ten of the 50 digital video recorders (DVRs) in an inventory are known to be defective. What is the probability you randomly select an item that is not defective?

Description : What Ten of the 50 digital video recorders (DVRs) in an inventory are known to be defective. What is the probability you randomly select an item that is not defective?

Last Answer : It is 0.8

If a customer agrees to retain merchandise that is defective because the seller is willing to reduce the selling price, this transaction is known as a sales a. discount. b. return. c. contra asset. d. allowance.

Description : If a customer agrees to retain merchandise that is defective because the seller is willing to reduce the selling price, this transaction is known as a sales a. discount. b. return. c. contra asset. d. allowance.

Last Answer : b. return.

Why do cable manufacturers introduce a controlled twist to the stacked ribbons during the cabling process?

Description : Why do cable manufacturers introduce a controlled twist to the stacked ribbons during the cabling process?

Last Answer : To minimize fiber stress when the cable is bent

1. Where is Indian Institute of Petroleum located? 2. Which pair of countries the leading manufacturers of cement in the world ? 3. Of which kingdom was Malik Ambar the Prime Minister? 4. Which scientist shared the Nobel Prize in Physics with his son? 5. Which gase is essential for photosynthesis process?

Description : 1. Where is Indian Institute of Petroleum located? 2. Which pair of countries the leading manufacturers of cement in the world ? 3. Of which kingdom was Malik Ambar the Prime Minister? 4. ... African States? 20. Which state ranks first in terms of the maximum number of agro-based industries?

Last Answer : Answer : 1. Dehradun 2. China and India 3. Ahrnadnagar 4. William Henry Bragg 5. CO2 6. Sachidananda Sinha 7. Congo 8. Dadabhai Naoroji 9. Hydrogen bonding 10. Tea 11. Atmospheric refraction 12. River Hudson 13. Lytton 14. Xylem 15. B. R. Ambedkar 16. Gamma rays 17. 25 18. 1917 19. France 20. Punjab

Anyone pull their money out of the market before this latest tumble?

Description : Anyone pull their money out of the market before this latest tumble?

Last Answer : I don't understand much about finances and/or financial markets, but what I heard is that analists are scratching their heads over what Mnuchin has done over the last day(s) (calling 6 CEO's of big banks, and trying ... are not yet at their lowest. If I had money (I don't) I would wait a few days.

Northern Foods is using sales promotion to motivate wholesalers and retailers to carry a new product and to market the product aggressively. What type of sales promotion is the company using? A)Consumer sales promotion B)Product sales promotion C)Trade sales promotion D)Merchandising promotion E)Pull promotion

Description : Northern Foods is using sales promotion to motivate wholesalers and retailers to carry a new product and to market the product aggressively. What type of sales promotion is the company ... sales promotion B)Product sales promotion C)Trade sales promotion D)Merchandising promotion E)Pull promotion

Last Answer : C)Trade sales promotion

A pull system a) Requires Requires high levels of levels of finished goods finished goods inventory inventory b) Relies heavily on accurate Relies heavily on accurate sales forecasts sales forecasts c) Waits for customer orders d) Necessitates Necessitates standardized standardized products

Description : A pull system a) Requires Requires high levels of levels of finished goods finished goods inventory inventory b) Relies heavily on accurate Relies heavily on accurate sales forecasts sales forecasts c) Waits for customer orders d) Necessitates Necessitates standardized standardized products

Last Answer : c) Waits for customer orders

Promotional mix strategy in which advertisement and promotions are made to final customers to induce them to buy products is classified as A. pull strategy B. moral selling strategy C. rational selling strategy D. push strategy

Description : Promotional mix strategy in which advertisement and promotions are made to final customers to induce them to buy products is classified as A. pull strategy B. moral selling strategy C. rational selling strategy D. push strategy

Last Answer : A. pull strategy

Is it possible to treat nylon (as in of an umbrella) that's defective?

Description : Is it possible to treat nylon (as in of an umbrella) that's defective?

Last Answer : You could spray Scotch-Gard on it.

Is my Lexmark color ink cartridge defective?

Description : Is my Lexmark color ink cartridge defective?

Last Answer : Sounds like it was a long time since you used the printer and the jets on the printer head are clogged with old dry ink. Check the Lexmark trouble shooting page, it is .pdf. They have a multi step cleaning procedure for getting the jets clean.

Could the person who put the defective item out by the trash be sued if someone picked it up, tried to use it, then got hurt?

Description : Could the person who put the defective item out by the trash be sued if someone picked it up, tried to use it, then got hurt?

Last Answer : No, you would absolutely not get in trouble. It was in the trash!

How does an insurance claim work when defective carpetting has been installed?

Description : How does an insurance claim work when defective carpetting has been installed?

Last Answer : You can, but you will probably have to pay for the difference between the cost of replacing the old carpet and what the new carpet will cost.

How do I fix this defective pixel?

Description : How do I fix this defective pixel?

Last Answer : You have to get a replacement if it’s under warranty. If it’s not, just deal with it I guess, b/c it will be too expensive to fix.

Is my carbon monoxide alarm defective?

Description : Is my carbon monoxide alarm defective?

Last Answer : It could be either really. If your stove was on but your vent was also on over your stove this could have been carrying most of the CO outside. Or if you had fans on in the house, that could ... . Don't just use the button to test the system this really only tells you that the alarm is functioning.

Are those terrorists genetically defective, under the influence of a virus, or what?

Description : Are those terrorists genetically defective, under the influence of a virus, or what?

Last Answer : They are just very angry, very misguided people, some of whom believe so strongly in an after-life and that what they are doing is right that they truly believe blowing themselves will reward them in the next life. Fucking losers, lol

How does a person disable their defective car alarm?

Description : How does a person disable their defective car alarm?

Last Answer : Try this

Do you ever wonder if it is a pre-requisite in order to be a politician that you must have a defective moral compass so that you can cheat on your spouse?

Description : Do you ever wonder if it is a pre-requisite in order to be a politician that you must have a defective moral compass so that you can cheat on your spouse?

Last Answer : nope. the prerequisite is thinking with your dick.

Ok, i just got a new ipod touch, replacement of my defective one, they gave it to me in 1.1.4 firmware but i paid for the 2.0?

Description : Ok, i just got a new ipod touch, replacement of my defective one, they gave it to me in 1.1.4 firmware but i paid for the 2.0?

Last Answer : Sign in with your iTunes account and it should let you redownload everything for free.

In 2000, a 40-year-old doctor told his son that when a little boy he decided to be a doctor by seeing a internet web site about performing a heart transplant on a puppy with a defective heart so that the puppy would live a normal life. I then thought that I would be a doctor so that I could help people in a similar way. What is the defect in this story? -Riddles

Description : In 2000, a 40-year-old doctor told his son that when a little boy he decided to be a doctor by seeing a internet web site about performing a heart transplant on a puppy with a defective heart so that ... doctor so that I could help people in a similar way. What is the defect in this story? -Riddles

Last Answer : The internet did not exist when the doctor was a little boy.

What should consumers do if the product proves to be defective in any manner? -SST 10th

Description : What should consumers do if the product proves to be defective in any manner? -SST 10th

Last Answer : They should complain and claim for compensation or replacement.