Compare industrial electrical installation and residential electrical installation.

2 Answers

Answer :

Basis
Industrial Electrical Installation 
Residential Electrical Installation
Location
In industrial estate or MIDC area
Highly population density area
Cost
More
Less
Precautions
All precautions should be taken
All safety precautions should be taken
Supply
Generally 3-ph, 400V AC supply is provided
Generally 1-ph, 230V AC supply is provided
Tariff
Tariff for industrial load is different
Block rate tariff is applied

Answer :

Basis
Residential Electrical Installation
Commercial Electrical Installation
Load capacity
Less
High
Input Supply
Generally single phase
Generally 3 phase
Purpose
Domestic purpose
Commercial purpose
Type of Load
Lighting load is more, power load is less.
Power load is more, lighting load is less.
Distribution
Bus bar chamber is not required.
Bus bar chamber is required.
Safety precautions 
It is not public place so as per our convenience fuse or MCB can be used.
It is public place so fuse MCB, MCCB should be compulsory used.
Sub-circuit
The lighting sub-circuit and power sub-circuit are separated
The lighting sub-circuit and power sub-circuit are separated
Power factor improvement
There is no need of power factor improvement device
If the power factor is poor then there is need of power factor improving device
Caution
There is no need of caution notice for residential installation
If supply voltage is equal to or more then 400V then there is need of caution notice

Related questions

Description : Define the following: i) Residential load ii) Industrial load

Last Answer : i) Residential load: The electrical load which is used in residential installation is called as residential load. E.g. incandescent lamp, florescent tube, fan ,5A socket &15A socket etc.   ii ... 3-ph any type of motor, electric furnace ,oven,welding transformer and any power load etc. 

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Description : Explain selection of starters for Industrial Installation. 

Last Answer : selection of starters for Industrial Installation: Every motor must be provided with a starter to start and stop the motor. It shall be within the sight of a person at the motor. It shall be so arranged as ... -Auto transformer starter  Slip ring I.M.------------------Rotor resistance starter

Description : State any four general rules for Electrical Installation.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : List the types of Internal wiring in residential installations –

Last Answer : 1) Cleat wiring 2) Batten wiring 3) Wooden casing capping wiring 4) PVC conduit wiring 5) PVC casing capping wiring 6) Concealed wiring

Description : Why earthing is essential in electrical installation ? Explain any one type of earthing. 

Last Answer : Following reasons earthing is essential in electrical installation :   1. To provide an alternative path for the leakage current to flow towards earth. 2. To save human life from danger of electrical shock ... G.I. pipe of size 19mm and funnel for pouring the water in earth pit when required.

Description : Define Electrical Installation and give its classification.

Last Answer : Meaning of Electrical installation : Electrical installation is a process of estimation and erection of electrical wiring with materials, and electrical machines used by ... Residential Electrical Installation ii) Commercial Electrical Installation iii) Industrial Electrical Installation 

Description : XM Radio Installation

Last Answer : XM Satellite Radio is one of the two subscription radio services operating in the United States and Canada, the other being its competitor Sirius Satellite Radio. Installing XM radio to your car is an easy ... task on your own. XM radio manuals are available online, so you can refer to them anytime.

Description : The Guide to Radio Installation

Last Answer : Most brand new cars come with an existing radio tuner from manufacturers. If you are not satisfied with your current sound system, the first step to installing a new tuner is removing the one already ... following these steps, you may begin to undo the wiring connections of the radio from the car.

Description : Sirius Radio Installation

Last Answer : Sirius Satellite Radio is one of the two radio subscription services offered in the United States and Canada, the other one being XM Satellite Radio. There are basically two ways of installing Sirius ... cassette slot. The first method of wired connection, though, is still better than this option.

Description : Septic Tank Installation

Last Answer : You can always settle for the community septic system set up by private corporations or the local government. It's more convenient that way, as you don't have to do anything but live in your house and ... digging and excavating, and we think it'll take more than just a couple of shovels to do that.

Description : Satellite Radio Installation

Last Answer : Satellite radio is so far the most advanced radio service around. XM Satellite Radio and Sirius Satellite Radio are the two competitors providing this service to the United States and Canada. The ... to the LINE OUT port of the satellite radio transmitter and inserted in your cassette slot.

Description : Radio Installation Kit

Last Answer : Are you having problems making your new radio fit in your dash board? This is a common problem for cars and radio units that do not follow the standard sizing of radio tuners today, ... units. Other installation needs, like harnesses and wiring connectors, may also be included in the kits.

Description : Carpet Installation

Last Answer : Carpet installation is not an easy matter to deal with. Apart from the costs you have to incur for the materials, you have to get your home prepared for the big day. The challenge is greater if you ... by opening all doors and windows of the rooms. Make sure also to run all exhaust fans as well.

Description : Car Radio Installation

Last Answer : Most car models today come with an existing radio tuner. If you want to upgrade to a new radio system, the first thing you need to do is remove the existing old unit off your vehicle. After doing so, ... its proper position - a sign that it's locked in place and that your radio is ready for use.

Description : How to check the quality of installation of interior doors?

Last Answer : How to check the quality of installation of interior doors? Interior doors are being installed at the final stage of renovation. It can take up to 5 hours to install one door. But, ... tips will help you avoid possible problems and properly control the quality of installation of interior doors.

Description : State the procedure for laying / installation of underground cable.  

Last Answer : 1) Direct laying Cable: or Trench laying method: Procedure: * For laying of a cable trench about 1.5m deep and 0.5m wide is made along the cable route. * A ... over. * Cables laid in this manner are usually plain lead covered because troughing affords good mechanical protection. 

Description : State different types of holders used in wiring installation.

Last Answer : Following types of holders used in wiring installation: 1. Pendent Holder 2. Batten Holder 3. Angle holder 4. Screwed holder 

Description : Which of the following is not a part of transformer installation?  (A) Conservator (B) Breather (C) Buchholz Relay (D) Exciter

Last Answer : Which of the following is not a part of transformer installation?  (A) Conservator (B) Breather (C) Buchholz Relay (D) Exciter

Last Answer : The primary reason for low power factor is supply system is due to installation of induction motors.

Description : Compare and contrast Puritans and Protestants or Puritans and Pilgrims?

Last Answer : What do you know already about the Protestants and the Puritans? What class is this for? Anything else you wanna include, maybe the entire prompt?

Description : Does the human heart compare to the engine in your automobile?

Last Answer : Very simply…take care of your heart/body and it should serve you well for many years. But life is full of curve-balls and you never know when you will get rear ended! ;)

Description : Compare reciprocating and rotary air compressor

Last Answer : Reciprocating compressor Rotary compressor  1. Compression of air takes place with help of piston and cylinder arrangement with reciprocating motion of piston. 1. Compression of air takes place ... High 12. More Starting torque required 12. Less Starting torque required

Description : Compare casing capping wiring with concealed wiring.

Last Answer : Compare casing capping wiring with concealed wiring: 

Description : Compare between Hot rolling and Cold rolling.

Last Answer : Hot rolling Cold rolling  Metal is fed to the rolls after being heated above the recrytallization temperature. Metal is fed to the rolls when it is below the recrytallization temperature. ... Hot rolling is the father of the cold rolling. Cold rolling follows the hot rolling.

Description : Compare the AC and DC Arc lamps.

Last Answer : AC Arc Lamp DC Arc Lamp Cross section area of electrode is same Cross section area of electrode is positive rod is twice that of negative rod Series inductor is used for stability ... supply is used for DC arc lamp Luminous efficiency is less Luminous efficiency is high

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Last Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

Description : Compare synchronous and asynchronous counter.

Last Answer : Asynchronous Counter Synchronous Counter In an Asynchronous Counter the output of one Flip Flop acts as the clock Input of the next Flip Flop. In a Synchronous Counter all the Flip Flop's are ... Also called as serial counter Also called as Parallel Counter

Description : Compare FPGA and CPLD.

Last Answer : Sr no: FPGA CPLD 1 It is field programmable gate array. It is complex programmable logic device. 2 Capacity is defined in terms of number of gates available. ... 8 FPGA are available in wide density range. CPLD contain fewer registers but have better performance.

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

Description : Compare base load plant with peak load plant on any two points.

Last Answer : Points Base load plant Peak load plant Definition The power plant which supplies base load of load curve is known as base load plant  The power plant which supplies ... ,thermal,nuclear power station Small capacity storage hydro,pumped storage hydro,gas,diesel power station.

Description : Classify the solar collectors and compare them. 

Last Answer : Classification of solar collectors :-  1. There are two main types of Flat Plate type collectors :- a) Flat plate collectors (FPC) b). Evacuated Tubular collector (ETC)  2. Concentrating ... directly from water Can be used to generate electricity with the help of steam turbine

Description : Compare conventional energy sources with renewable energy sources on any four points. 

Last Answer : Points Conventional Energy Sources Renewable Energy Sources Availability Limited Unlimited Cost of Fuel High depending on fuel.  Negligible Amount of Power generated On large scale due ... should be selected at source For example HPP, TPP, NPP SPP and WPP

Description : Compare CC and PC of wattmeter on the basis of:- (i) Connection (ii) Status (iii) Number of turns (iv) Gauge of wire.

Last Answer : Particulars Current coil (CC) Pressure coil (PC) Connection Connected in series with load Connected in parallel with load Status It is fixed coil in wattmeter It is moving coil in ... number of turns It is having more number of turns Gauge of wire Less More

Description : Compare primary and secondary instruments.

Last Answer : Primary instruments  Secondary instruments  Gives magnitude of quantity in terms of physical constants of instrument  Gives reading directly of the quantity measured.  Need no calibration  ... .  e.g. magnetic meter, induction meter, hotwire meter and electrostatic meter 

Description : Compare PMMC & MI instrument.

Last Answer : MI Instrument  PMMC Instrument  It works on the principles of magnetism.  It works on the principle of DC motor Deflection torque is proportional to square of current  Deflection ... , Voltmeter and Watt meter  Can be used as voltmeter, Ammeter, Galvanometer, ohmmeter  

Description : Compare JFET with MOSFET.

Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Description : Compare analog & digital multimeter.

Last Answer : Analog multi-meter DMM Power supply is not required  Power supply is required  Less suffered from electric noise  More suffered from electric Noise Less isolation problems. More ... visual indication Visual indication is not that much better. Less cost More cost

Description : Compare BJT with FET

Last Answer : FET BJT It is unipolar device i.e. current in the device is carried either by electrons or holes It is bipolar device i.e. current in the device is carried either by ... from minority- carrier storage effects & therefore has lower switching speeds & cut-off frequencies. 

Description : Compare intrinsic and extrinsic semiconductor

Last Answer : Intrinsic semiconductor Extrinsic Semiconductor Pure form of semiconductor Impure form of semiconductor No. electrons and holes are equal  No. of electrons and holes are not equal Electrical ... e.g. Ge, Si semiconductor e.g. p-type or n-type semiconductor

Description : Compare RC and LC filter.

Last Answer : RC filters  LC filters The RC filter is only useful for small load currents. The LC filters are useful for heavy load currents. More power dissipated in RC filter. Less power ... RC is fine for filtering low power signals. LC is fine for filtering high power signals.

Description : Compare between CB , CE & CC transistor configuration.

Last Answer : Parameter CB CE CC I/P impedance Low Or 50Ω Medium Or 600Ωto 4kΩ High Or 1 MΩ Current Gain Less than or equal to 1 High Highest Voltage Gain Medium Medium Less ... k Ω to 50 k Ω Low Or 50 Ω Phase shift between input and output 0° 360° 0° 

Description : Compare statically induced emf with dynamically induced emf on any four points.

Last Answer : Statically induced emf Dynamically induced emf Emf is induced without any relative motion between conductor and magnetic field. Emf is induced due to relative motion between conductor ... induced in transformer windings e.g emf induced in Generator, Alternator armature windings

Description : Compare copper and aluminium.

Last Answer : Copper Aluminium Resistivity is less Resistivity is more More weight Low weight Mechanically strong Mechanically weaker Specific Gravity high Specific Gravity Low ... Tensile strength is half of that of copper Used for winding Used for overhead lines

Description : Compare star and Delta Connection.

Last Answer : Compare Star and Delta connected system:  Star connected system Delta connected system   In STAR connection, the starting or finishing ends (Similar ends) of three coils are connected together to form the ... VPH Line Current is √3 times of Phase Current. i.e. IL = √3 IPH

Description : Compare electric and magnetic circuit.

Last Answer : Comparison between Magnetic and Electric Circuits

Last Answer : EPROM EEPROM Flash EPROM Normalize cell size is 1. Normalize cell size is about 1 ... and floating gate, which is insulated by a dielectric material. NAND flash memory and NOR flash memory are the two types of flash memory.

Description : Compare BJT, MOSFET and IGBT .

Last Answer : BJT MOSFET IGBT BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device. The input impedance of BJT is low. ... is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.

Description : Is there ANY way to sell some industrial valves for more than scrap value without having paperwork?

Last Answer : Have you tried Craigslist or Ebay?