Does the human heart compare to the engine in your automobile?

Does the human heart compare to the engine in your automobile?
by

1 Answer

Answer :

Very simply…take care of your heart/body and it should serve you well for many years. But life is full of curve-balls and you never know when you will get rear ended! ;)
by

Related questions

Compare and contrast Puritans and Protestants or Puritans and Pilgrims?

Description : Compare and contrast Puritans and Protestants or Puritans and Pilgrims?

Last Answer : What do you know already about the Protestants and the Puritans? What class is this for? Anything else you wanna include, maybe the entire prompt?

Compare reciprocating and rotary air compressor

Description : Compare reciprocating and rotary air compressor

Last Answer : Reciprocating compressor Rotary compressor  1. Compression of air takes place with help of piston and cylinder arrangement with reciprocating motion of piston. 1. Compression of air takes place ... High 12. More Starting torque required 12. Less Starting torque required

Compare casing capping wiring with concealed wiring.

Description : Compare casing capping wiring with concealed wiring.

Last Answer : Compare casing capping wiring with concealed wiring: 

Compare between Hot rolling and Cold rolling.

Description : Compare between Hot rolling and Cold rolling.

Last Answer : Hot rolling Cold rolling  Metal is fed to the rolls after being heated above the recrytallization temperature. Metal is fed to the rolls when it is below the recrytallization temperature. ... Hot rolling is the father of the cold rolling. Cold rolling follows the hot rolling.

Compare the AC and DC Arc lamps.

Description : Compare the AC and DC Arc lamps.

Last Answer : AC Arc Lamp DC Arc Lamp Cross section area of electrode is same Cross section area of electrode is positive rod is twice that of negative rod Series inductor is used for stability ... supply is used for DC arc lamp Luminous efficiency is less Luminous efficiency is high

Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Last Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

Compare synchronous and asynchronous counter.

Description : Compare synchronous and asynchronous counter.

Last Answer : Asynchronous Counter Synchronous Counter In an Asynchronous Counter the output of one Flip Flop acts as the clock Input of the next Flip Flop. In a Synchronous Counter all the Flip Flop's are ... Also called as serial counter Also called as Parallel Counter

Compare FPGA and CPLD.

Description : Compare FPGA and CPLD.

Last Answer : Sr no: FPGA CPLD 1 It is field programmable gate array. It is complex programmable logic device. 2 Capacity is defined in terms of number of gates available. ... 8 FPGA are available in wide density range. CPLD contain fewer registers but have better performance.

How does the resistance of a conductor compare to that of an insulator?

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Compare between Resistance welding and Arc welding on any six points.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

Compare industrial electrical installation and residential electrical installation.

Description : Compare industrial electrical installation and residential electrical installation.

Last Answer : Basis Residential Electrical Installation Commercial Electrical Installation Load capacity Less High Input Supply Generally single phase Generally 3 phase Purpose Domestic ... supply voltage is equal to or more then 400V then there is need of caution notice

Compare base load plant with peak load plant on any two points.

Description : Compare base load plant with peak load plant on any two points.

Last Answer : Points Base load plant Peak load plant Definition The power plant which supplies base load of load curve is known as base load plant  The power plant which supplies ... ,thermal,nuclear power station Small capacity storage hydro,pumped storage hydro,gas,diesel power station.

Classify the solar collectors and compare them.

Description : Classify the solar collectors and compare them. 

Last Answer : Classification of solar collectors :-  1. There are two main types of Flat Plate type collectors :- a) Flat plate collectors (FPC) b). Evacuated Tubular collector (ETC)  2. Concentrating ... directly from water Can be used to generate electricity with the help of steam turbine

Compare conventional energy sources with renewable energy sources on any four points.

Description : Compare conventional energy sources with renewable energy sources on any four points. 

Last Answer : Points Conventional Energy Sources Renewable Energy Sources Availability Limited Unlimited Cost of Fuel High depending on fuel.  Negligible Amount of Power generated On large scale due ... should be selected at source For example HPP, TPP, NPP SPP and WPP

Compare CC and PC of wattmeter on the basis of:- (i) Connection (ii) Status (iii) Number of turns (iv) Gauge of wire.

Description : Compare CC and PC of wattmeter on the basis of:- (i) Connection (ii) Status (iii) Number of turns (iv) Gauge of wire.

Last Answer : Particulars Current coil (CC) Pressure coil (PC) Connection Connected in series with load Connected in parallel with load Status It is fixed coil in wattmeter It is moving coil in ... number of turns It is having more number of turns Gauge of wire Less More

Compare primary and secondary instruments.

Description : Compare primary and secondary instruments.

Last Answer : Primary instruments  Secondary instruments  Gives magnitude of quantity in terms of physical constants of instrument  Gives reading directly of the quantity measured.  Need no calibration  ... .  e.g. magnetic meter, induction meter, hotwire meter and electrostatic meter 

Compare PMMC & MI instrument.

Description : Compare PMMC & MI instrument.

Last Answer : MI Instrument  PMMC Instrument  It works on the principles of magnetism.  It works on the principle of DC motor Deflection torque is proportional to square of current  Deflection ... , Voltmeter and Watt meter  Can be used as voltmeter, Ammeter, Galvanometer, ohmmeter  

Compare JFET with MOSFET.

Description : Compare JFET with MOSFET.

Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Compare analog & digital multimeter.

Description : Compare analog & digital multimeter.

Last Answer : Analog multi-meter DMM Power supply is not required  Power supply is required  Less suffered from electric noise  More suffered from electric Noise Less isolation problems. More ... visual indication Visual indication is not that much better. Less cost More cost

Compare BJT with FET

Description : Compare BJT with FET

Last Answer : FET BJT It is unipolar device i.e. current in the device is carried either by electrons or holes It is bipolar device i.e. current in the device is carried either by ... from minority- carrier storage effects & therefore has lower switching speeds & cut-off frequencies. 

Compare intrinsic and extrinsic semiconductor

Description : Compare intrinsic and extrinsic semiconductor

Last Answer : Intrinsic semiconductor Extrinsic Semiconductor Pure form of semiconductor Impure form of semiconductor No. electrons and holes are equal  No. of electrons and holes are not equal Electrical ... e.g. Ge, Si semiconductor e.g. p-type or n-type semiconductor

Compare RC and LC filter.

Description : Compare RC and LC filter.

Last Answer : RC filters  LC filters The RC filter is only useful for small load currents. The LC filters are useful for heavy load currents. More power dissipated in RC filter. Less power ... RC is fine for filtering low power signals. LC is fine for filtering high power signals.

Compare between CB , CE & CC transistor configuration.

Description : Compare between CB , CE & CC transistor configuration.

Last Answer : Parameter CB CE CC I/P impedance Low Or 50Ω Medium Or 600Ωto 4kΩ High Or 1 MΩ Current Gain Less than or equal to 1 High Highest Voltage Gain Medium Medium Less ... k Ω to 50 k Ω Low Or 50 Ω Phase shift between input and output 0° 360° 0° 

Compare statically induced emf with dynamically induced emf on any four points.

Description : Compare statically induced emf with dynamically induced emf on any four points.

Last Answer : Statically induced emf Dynamically induced emf Emf is induced without any relative motion between conductor and magnetic field. Emf is induced due to relative motion between conductor ... induced in transformer windings e.g emf induced in Generator, Alternator armature windings

Compare copper and aluminium.

Description : Compare copper and aluminium.

Last Answer : Copper Aluminium Resistivity is less Resistivity is more More weight Low weight Mechanically strong Mechanically weaker Specific Gravity high Specific Gravity Low ... Tensile strength is half of that of copper Used for winding Used for overhead lines

Compare star and Delta Connection.

Description : Compare star and Delta Connection.

Last Answer : Compare Star and Delta connected system:  Star connected system Delta connected system   In STAR connection, the starting or finishing ends (Similar ends) of three coils are connected together to form the ... VPH Line Current is √3 times of Phase Current. i.e. IL = √3 IPH

Compare electric and magnetic circuit.

Description : Compare electric and magnetic circuit.

Last Answer : Comparison between Magnetic and Electric Circuits

Compare various electrically erasable memory technique. Also explain flash memory.

Last Answer : EPROM EEPROM Flash EPROM Normalize cell size is 1. Normalize cell size is about 1 ... and floating gate, which is insulated by a dielectric material. NAND flash memory and NOR flash memory are the two types of flash memory.

Compare BJT, MOSFET and IGBT .

Description : Compare BJT, MOSFET and IGBT .

Last Answer : BJT MOSFET IGBT BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device. The input impedance of BJT is low. ... is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.

Can you describe the process by which a modern internal combustion automobile engine is designed?

Description : Can you describe the process by which a modern internal combustion automobile engine is designed?

Last Answer : Well, I say it’s designed to function as certain shape to fit a certain area, once that’s all worked out it does this

Why don't expert automobile mechanics design engines or are mechanical engineers that design engines by nature expert engine mechanics?

Description : Why don't expert automobile mechanics design engines or are mechanical engineers that design engines by nature expert engine mechanics?

Last Answer : You need to know physics to tee to design an engine. I know how to take apart my PC and reassemble it and do trouble shooting, but I have no idea how to design a processor or board pathway layouts.

Radiator of an automobile engine is a __________ type of heat exchanger. (A) Co-current (B) Cross-current (C) Counter-current (D) Direct contact

Description : Radiator of an automobile engine is a __________ type of heat exchanger. (A) Co-current (B) Cross-current (C) Counter-current (D) Direct contact

Last Answer : (D) Direct contact

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

The loads supported by an automobile frame are……….. a) Weight of the body and Passengers. b) Torque from engine and Transmission. c) Sudden Impact from Collision d) All of the above.

Description : The loads supported by an automobile frame are……….. a) Weight of the body and Passengers. b) Torque from engine and Transmission. c) Sudden Impact from Collision d) All of the above.

Last Answer : d) All of the above.

A four cycle internal combustion automobile engine operates on what kind of cycle? w) Rankine x) Otto y) Brayton z) Joule

Description : A four cycle internal combustion automobile engine operates on what kind of cycle? w) Rankine x) Otto y) Brayton z) Joule

Last Answer : ANSWER: X -- OTTO

The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 %

Description : The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 % 

Last Answer : ANSWER: Y -- 35 % 

Compare 2-stroke and 4 – stroke engine

Description : Compare 2-stroke and 4 – stroke engine

Last Answer : S. N. Four Stroke Engine Two Stroke Engine 1 One working stroke for every two revolutions of the crankshaft. One working stroke for each revolutions of the crankshaft 2 Turning ... Engine is air cooled 10 Engine requires more space.  Engine requires less space. 

Compare carbureted engine with MPFI engine

Description : Compare carbureted engine with MPFI engine

Last Answer : Sr.  Carbureted fuel system Electronic fuel injection system 1 Mal-distribution of charge.  Uniform distribution of charge.  2 Due to resistance in intake manifold volumetric ... is take place inside the manifold. Fuel being injected into or close to the cylinder. 

Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Description : Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Last Answer : Parameter SI engine CI engine Air-fuel ratio air-fuel ratio is 14.7:1 air-fuel ratio is 20:1 to 70:1  Power output  Power output is Less than CI engine due ... Knocking take place at the end of combustion. Knocking take place at beginning or start of the combustion. 

Compare carbureted engine fuel supply system with MPFI system.

Description : Compare carbureted engine fuel supply system with MPFI system.

Last Answer : Sr.No. Carbureted fuel supply system MPFI fuel supply system 1 Mal-distribution of charge.  Uniform distribution of charge.  2 Due to resistance in intake manifold volumetric ... is take place inside the manifold. fuel being injected into or close to the cylinder. 

Compare the SI and CI engine on the basis of: (i) Compression Ratio (ii) Operating Speed (iii) Power O/P per weight.

Description : Compare the SI and CI engine on the basis of: (i) Compression Ratio (ii) Operating Speed (iii) Power O/P per weight.

Last Answer : Parameter SI Engine CI Engine (i) Compression Ratio Compression ratio is low, about 10:1 limited by detonation Compression ratio is higher, about 18:1 to 22:1 (ii) ... due to lower compression ratio. Power output is more than SI engine due to higher compression ratio.