In __________ converter for ammonia synthesis, the catalyst is arranged in the form of a single continuous bed. (A) Fauser-Montecatini (B) Claude (C) Uhde(D) Kellogg

In __________ converter for ammonia synthesis, the catalyst is
arranged in the form of a single continuous bed.
(A) Fauser-Montecatini
(B) Claude
(C) Uhde
(D) Kellogg
by

1 Answer

Answer :

(B) Claude
by

Related questions

Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these

Description : Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these

Last Answer : (A) Ammonia synthesis (e.g. at FCI Sindri, India)

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Description : Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Last Answer : (A) Its activity declines rapidly, if heated to above 520°C

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Description : Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Last Answer : (A) Uniformity of temperature

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor(C) Cannot use coking coal(D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

f the Kellogg Company decides to build a new cereal plant because it anticipates the next five years will bring low unemployment and increases in buying power, it is forecasting a period of: A)depression B)prosperity C)recovery D)austerity E)recession

Description : f the Kellogg Company decides to build a new cereal plant because it anticipates the next five years will bring low unemployment and increases in buying power, it is forecasting a period of: A)depression B)prosperity C)recovery D)austerity E)recession

Last Answer : B)prosperity

Montecatini process is a widely used process for the manufacture of (A) Urea (B) Calcium ammonium nitrate (C) Triple superphosphate (D) None of these

Description : Montecatini process is a widely used process for the manufacture of (A) Urea (B) Calcium ammonium nitrate (C) Triple superphosphate (D) None of these

Last Answer : (A) Urea

Montecatini process is used for the manufacture of (A) Nitric acid (B) Phosphoric acid (C) Urea (D) Calcium ammonium nitrate (CAN)

Description : Montecatini process is used for the manufacture of (A) Nitric acid (B) Phosphoric acid (C) Urea (D) Calcium ammonium nitrate (CAN)

Last Answer : (C) Urea

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

Low grade coal is __________ to produce ammonia synthesis gas. (A) Hydrogenated (B) Liquefied (C) Gasified (D) Dehydrogenated

Description : Low grade coal is __________ to produce ammonia synthesis gas. (A) Hydrogenated (B) Liquefied (C) Gasified (D) Dehydrogenated

Last Answer : (C) Gasified

Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Last Answer : (B) Endothermic

Fractional conversion __________ with increase in pressure for ammonia synthesis reaction i.e., N2 + 3H2 ⇌ 2NH3 . (A) Increases (B) Decreases (C) Remains unchanged (D) Unpredictable from the data

Description : Fractional conversion __________ with increase in pressure for ammonia synthesis reaction i.e., N2 + 3H2 ⇌ 2NH3 . (A) Increases (B) Decreases (C) Remains unchanged (D) Unpredictable from the data

Last Answer : (A) Increases

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Description : Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Last Answer : (C) 450 atm, 550°C

Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Description : Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Last Answer : (B) Platinum-rhodium

Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Claude gas liquefaction process employs cooling (A) At constant pressure (B) By throttling (C) By expansion in an engine (D) None of these

Description : Claude gas liquefaction process employs cooling (A) At constant pressure (B) By throttling (C) By expansion in an engine (D) None of these

Last Answer : (C) By expansion in an engine

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Last Answer : (C) V2O5

The industrial process of producing ammonia by the reaction of nitrogen with hydrogen in the presence of catalyst is called?

Description : The industrial process of producing ammonia by the reaction of nitrogen with hydrogen in the presence of catalyst is called?

Last Answer : Haber process

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Description : BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Last Answer : (A) Specific surface of a porous catalyst

Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates is not used to derive BET equation? (A) Langmuir's assumption applies to every adsorbed layer (B) There is no dynamic equilibrium between successive layer (C) The adsorbed layer may be polymolecular in thickness and the heat of adsorption in each layer (except the first one) is involved in each of the evaporation process (D) None of these

Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these

Last Answer : (B) There is no dynamic equilibrium between successive layer

Large scale usage of flash distillation is practised in (A) Soap manufacturing (B) Ammonia synthesis plant (C) Polymerisation industry (D) Petroleum refining

Description : Large scale usage of flash distillation is practised in (A) Soap manufacturing (B) Ammonia synthesis plant (C) Polymerisation industry (D) Petroleum refining

Last Answer : (D) Petroleum refining

Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Last Answer : (C) Partial oxidation

Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Last Answer : (B) Steam reforming

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

Ammonia synthesis reaction is (A) Exothermic (B) Endothermic (C) Autocatalytic (D) None of these

Description : Ammonia synthesis reaction is (A) Exothermic (B) Endothermic (C) Autocatalytic (D) None of these

Last Answer : (A) Exothermic

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Which of the following is not a commercially used feed-stock for the production of ammonia synthesis gas? (A) Water (B) Naphtha (C) Tar (D) Coal/coke oven gas

Description : Which of the following is not a commercially used feed-stock for the production of ammonia synthesis gas? (A) Water (B) Naphtha (C) Tar (D) Coal/coke oven gas

Last Answer : (C) Tar

In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at(A) Low pressure(B) High pressure(C) Very high temperature(D) Atmospheric pressure; as the pressure has no effect on conversion

Description : In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at (A) Low pressure (B) High pressure (C) Very high temperature (D) Atmospheric pressure; as the pressure has no effect on conversion

Last Answer : (B) High pressure

Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Description : Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Last Answer : (B) Exothermic

Which of the following is an autocatalytic reaction? (A) Photochemical reactions (B) Microbial fermentation reaction(C) Enzyme fermentation reaction(D) Ammonia synthesis reaction

Description : Which of the following is an autocatalytic reaction? (A) Photochemical reactions (B) Microbial fermentation reactio (C) Enzyme fermentation reaction (D) Ammonia synthesis reaction

Last Answer : (B) Microbial fermentation reaction

From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Description : From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Last Answer : (B) Catalytic cracking