Why is sodium carbonate added during solvent extraction?

Why is sodium carbonate added during solvent extraction?
by

1 Answer

Answer :

It is usually added during an extraction in order to make thesolution alkaline. Often times, this aids in the efficiency of theextraction.
by

Related questions

The leaching solvent used in Baeyer's process for the purification of bauxite is (A) Ammonium hydroxide (B) Sodium carbonate (C) Sodium hydroxide (D) Ammonium carbonate

Description : The leaching solvent used in Baeyer's process for the purification of bauxite is (A) Ammonium hydroxide (B) Sodium carbonate (C) Sodium hydroxide (D) Ammonium carbonate

Last Answer : Option B

Which scientific method is used for the production/extraction of Sodium carbonate?

Description : Which scientific method is used for the production/extraction of Sodium carbonate?

Last Answer : Solvay process

Pick out the wrong statement. (A) Eosin requirement in tallow soap is about 40-50% which fastens the lather formation, softens the hard soaps and increases its cleansing action (B) Soap powder is prepared by mixing soap with hydrated sodium carbonate (C) Detergents differ from soaps in their action in hard water (D) Tarnish inhibitor (e.g., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Description : Pick out the wrong statement. (A) Eosin requirement in tallow soap is about 40-50% which fastens the lather formation, softens the hard soaps and increases its cleansing action (B) Soap powder is ... ., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Last Answer : (D) Tarnish inhibitor (e.g., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

__________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Last Answer : (B) Solvent extraction

Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Description : Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used in solvent extraction decreases (C) The selectivity of solvent used in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0

Description : Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0

Last Answer : (B) > 1

The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3

Description : Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Description : In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Last Answer : (B) Solvent extraction

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction

Description : Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction

Last Answer : (B) Thermal diffusion

Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Description : Fractional solvent extraction (A) Employs only one solvent (B) Employs two solvents (C) Results in low interfacial tension (D) None of these

Last Answer : (B) Employs two solvents

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Description : In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Last Answer : (B) No separation will occur

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these

Description : Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these

Last Answer : (C) Repeated coalescence & redispersion of the drop phase

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate phase R containing A at xB = 0.5 and xR = 0.05 respectively. The total mass of the extract phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Last Answer : (B) 8.89

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Last Answer : (D) Leaching

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Write advantages of water as solvent for extraction

Description : Write advantages of water as solvent for extraction

Last Answer : • It is cheap & easily available. • Non –toxic • Non inflammable. • It has wide solvent action 

Which of the following is not added during the extraction of silver by cyanide process?

Description : Which of the following is not added during the extraction of silver by cyanide process?

Last Answer : Which of the following is not added during the extraction of silver by cyanide process? A. NaCN B. Air C. Zn D. `Na_(2)S_(2)O_(3)`

What happens when lime stone is not added during the extraction of iron?

Description : What happens when lime stone is not added during the extraction of iron?

Last Answer : If limestone is not added to charge during the extraction of iron, the blast furnace will get blocked.

State the role of lime stone in the extraction of iron from haematite. Or Why is lime stone added during the extraction of iron?

Description : State the role of lime stone in the extraction of iron from haematite. Or Why is lime stone added during the extraction of iron?

Last Answer : Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.

The major constituent of black liquor generated during paper manufacture is sodium (A) Sulphate (B) Carbonate (C) Hydroxide (D) Bi-carbonate

Description : The major constituent of black liquor generated during paper manufacture is sodium (A) Sulphate (B) Carbonate (C) Hydroxide (D) Bi-carbonate

Last Answer : (B) Carbonate

For extraction of sodium from `NaC1`, the electrolytic mixture `Nac1+Na_(3)A1F_(6) +Cac1_(2)` is used. During extractions process, only sodium is depo

Description : For extraction of sodium from `NaC1`, the electrolytic mixture `Nac1+Na_(3)A1F_(6) +Cac1_(2)` is used. During extractions process, only sodium is depo

Last Answer : For extraction of sodium from `NaC1`, the electrolytic mixture `Nac1+Na_(3)A1F_(6) +Cac1_(2)` is used. During ... that of `K^(+)` and `Ca^(+2)` ions

In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Last Answer : (A) Added to alter the relative volatility of the mixture

In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Last Answer : (C) Extractive

A volatile substance added to a paint to make its application easy and smooth, is known as (A) Base (B) Solvent (C) Vehicle (D) None to these

Description : A volatile substance added to a paint to make its application easy and smooth, is known as (A) Base (B) Solvent (C) Vehicle (D) None to these

Last Answer : Answer: Option B

Statement-1: Silica is added as a flux in reverberatory furnance, in the extraction of copper from copper pyrites. Statement-2: Silica decreases the m

Description : Statement-1: Silica is added as a flux in reverberatory furnance, in the extraction of copper from copper pyrites. Statement-2: Silica decreases the m

Last Answer : Statement-1: Silica is added as a flux in reverberatory furnance, in the extraction of copper from ... Statement-1 is false but Statement -2 is true

Why lime stone is added in the extraction of lead from galena ?

Description : Why lime stone is added in the extraction of lead from galena ?

Last Answer : Why lime stone is added in the extraction of lead from galena ? A. It prevents the formation of ... moves the impurity of iron oxide as fusible slag.

Why lime stone is added in the extraction of lead from galena?

Description : Why lime stone is added in the extraction of lead from galena?

Last Answer : Why lime stone is added in the extraction of lead from galena? A. It prevents the formation of ... moves the impurity of iron oxide as fusible slag.

Is sodium carbonate Na2CO3 and bicarbonate NaHCO3 one of the primary standard substances?

Description : Is sodium carbonate Na2CO3 and bicarbonate NaHCO3 one of the primary standard substances?

Last Answer : Why are you asking us these questions?

Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Description : Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Last Answer : i hope it helped you

What is Sodium Carbonate ?

Description : What is Sodium Carbonate ?

Last Answer : Sodium carbonate: Sodium carbonate is an inorganic chemical compound whose molecular symbol is Na²CO³ . It is also known as washing soda , soda ash and soda crystal. Sodium can be distinguished from ... because it is obtained from ash. It is used in the production of various commercial products.

What are the chemical signals of Sodium Carbonate ?

Last Answer : Chemical signal of sodium carbonate Na2CO3

How to prepare 250 g of 3% sodium carbonate solution? Thanks :)

Description : Could someone write me how it is calculated? Please write and calculate :)

Last Answer : I'll try, I just don't know if I'm allowed to contribute. In your case, these are weight percentages. Weight percentages indicate the number of grams of solute in 100 grams of solution. Thus: 3 g of ... water gives 250 g 3% sodium carbonate solution I don't know why I don't want to print in bold.