In a single bus-bar system there will be complete shut down when?

by

1 Answer

Answer :

In a single bus-bar system there will be complete shut down when fault occurs on the bus itself.

by

Related questions

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

write short notes on single phase system.

Description : write short notes on single phase system.

Last Answer : A "phase" in an electrical system is often referred to as the waveform (may be voltage or the current) of the power supply. The waveform in an AC system is typically ... domestic household or commercial supplies and street lighting. Industrial supplies requires three phase electrical supply .

What do you think when you see someone with his/her fly down?

Description : What do you think when you see someone with his/her fly down?

Last Answer : Makes me wonder how bad the level of our discourse has become today, when this question seems more interesting that most of the others.

How to Wash a Down Comforter

Description : How to Wash a Down Comforter

Last Answer : How to Wash a Down Comforter During a cold night, the down comforter is a good item to have. Its soft and fluffy surface provides much comfort, keeping the body warm for the entire night. You ... . So you won't be cleaning your comforter for a long time after going through the cleaning process.

What is design technology? Explain top down design process.

Description : What is design technology? Explain top down design process.

Last Answer : Design technology: Design technology is the manner in which we convert our concept desired system into an implementation. The three main design technologies are 1. Compilation/Synthesis ... general purpose processors and A Gate-level Netlist for special-purpose processors.

The single phasing relays are used for the protection of?

Last Answer : The single phasing relays are used for the protection of three phase motors.

For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Description : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Last Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25

What does this mean, do you think? All day long, I have been super tired and very thirsty...

Description : What does this mean, do you think? All day long, I have been super tired and very thirsty...

Last Answer : answer:It can only be something terrible. I assume it must be a third-world dread disease that you must have picked up on the subway or from eating a taco from a local stand. My advice? Write a will and go home. Oh, according to WEBMD, masturbation may be the cure.

Where are the avatars?

Description : Where are the avatars?

Last Answer : answer:This is super embarrassing. I… I… Okay, okay.. just spit it out.. I ate them all. I am so sorry.. I don’t really know what came over me. I was hungry and I thought I’d just start with one.. but then there was another one that looked good.. and then the next thing I knew, I’d eaten them all!

Explain buck converter.

Description : Explain buck or step down converter and draw its waveforms.

Last Answer : Buck converter or Step down converter: Buck converter is a step-down converter. The buck converter step-down the output voltage and step up the output current. Buck converter is a DC to DC converter. ... load. The output voltage is controlled by controlling on period and off period.

In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods

Description : In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods are ______ respectively.  (A) positive, negative and negative (B) positive, zero and negative (C) positive, positive and negative (D) positive, negative and zero

Last Answer : In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods are positive, negative and negative respectively. 

A lightening arrester connected between the line and earth in a power system protects the terminal equipment

Description : A lightening arrester connected between the line and earth in a power system  (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct ... suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it

Last Answer : A lightening arrester connected between the line and earth in a power system protects the terminal equipment against travelling surges

With fault clearing time, the transient stability of a power system

Description : With fault clearing time, the transient stability of a power system

Last Answer : With fault clearing time, the transient stability of a power system decreases

A balanced 3-phase system consists of?

Last Answer : A balanced 3-phase system consists of positive sequence currents.

The steady state stability of the power system can be increased by?

Last Answer : The steady state stability of the power system can be increased by connecting lines in parallel.

Air blast circuit breakers for 400 kV power system are designed to operate in?

Last Answer : Air blast circuit breakers for 400 kV power system are designed to operate in 50 millisecond.

Ungrounded neutral transmission system is not recommended because of system?

Last Answer : Ungrounded neutral transmission system is not recommended because of system insulation being overstressed due to over voltages, insulation overstress may lead to failure and subsequent phase to phase faults, being inadequately protected against ground fault.

The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to?

Last Answer : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to extinguish the arc.

SINGLE PHASE INDUCTION MOTORS MCQ

Description : SINGLE PHASE INDUCTION MOTORS MCQ

Last Answer : 101. After the starting winding of a single phase induction motor is disconnected from supply, it continues to run only on (a) running winding (b) rotor winding (c) field winding (d) compensating winding Ans: a ... motor is usually reduced by using (a) gearing (b) belts (c) brakes (d) chains Ans: a

State the meaning of Single line diagram.

Description : State the meaning of Single line diagram.

Last Answer : Meaning of Single line diagram: The single line diagram of a power system is the network which shows the main connections and arrangement of the system components along with their data ( ... breakers, transformers, capacitors, bus bars, and conductors are shown by standardized schematic symbols. 

Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it.

Description : Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it. 

Last Answer : Circuit Diagram: Waveforms:

Single phase transformer

Description : Single phase transformer

Last Answer : Single phase Transformer Transformer

Explain MCB and ELCB with connection diagram supplying single phase load.

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

Single point Cutting tool signature

Description : Single point Cutting tool signature

Last Answer : The shape of a tool is specified in a special sequence and this special sequence is called tool signature. The tool signature is given below (i) Back rake angle (ii) Side rake angle (iii) ... rake, end relief, side relief, end cutting edge, side cutting edge angle and 0.8 mm nose radius.

State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Description : State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Last Answer : Application Suitable Single Phase Motor Table Fan 1) Capacitor split phase motor 2) Capacitor start capacitor run motor Mixers and Grinders 1) Universal motor 2) A.C. Series motor

Illustrate with neat wiring diagram a single lamp control by two point method.

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Why is a capacitor used in a single phase motor and not in three phase motor ?

Description : Why is a capacitor used in a single phase motor and not in three phase motor ?

Last Answer : In 1-phase induction motor capacitor work is generate the auxiliary winding current than excite the main winding to rotor starts rotate. After rotor start rotating about 75% of their speed than auxiliary ... emf to start the motor.so,in 3-phase induction motor is self start induction motor.

working principle of single phase motor

Description : working principle of single phase motor

Last Answer : The Stator of single phase induction motor houses two windings  1. Main (Running) winding 2. Auxiliary (Starting ) winding Rotor of single phase induction motor is ... with starting winding or a capacitor may be permanently connected in series with Auxiliary (Starting ) winding.

Single stage CE amplifier

Description : Single stage CE amplifier

Last Answer : Requirement(Necessity) of Multistage amplifier: -In many applications we required a high gain. But sometimes gain produced by an amplifier is not sufficient so to increase the gain, we ... necessity of multistage amplifier is for providing high gain. It is also required for high bandwidth.

Explain the working of a single phase capacitor start induction motor.

Description : Explain the working of a single phase capacitor start induction motor. 

Last Answer : Single phase capacitor start induction motor https://youtu.be/31lvvzU5Puc

Explain construction and working principle of single phase transformer.

Description : Explain construction and working principle of single phase transformer.

Last Answer : A single phase transformers is an electrical device that accepts single-phase AC power and outputs single-phase AC. PRINCIPLE... The single-phase transformer works on the principle of ... and secondary windings. Thin steel laminations shall be employed to prevent power losses from the core.

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

State advantages of three phase over single phase.

Description : State advantages of three phase over single phase.

Last Answer : Advantages of 3-phase system over 1-phase system: -  1. More output: For the same size, output of poly-phase machines is always higher than single phase machines.  2. Smaller size: For ... are self- starting: The three phase ac motors are self starting, while single phase induction motor are not.

In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room

Description : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

Last Answer : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: Zero 

In a 16-bit microprocessor, a single word is

Description :  In a 16-bit microprocessor, a single word is A) 16 bit data B) 32 bit data C) 8 bit data D) 64 bit data 

Last Answer :  In a 16-bit microprocessor, a single word is 16 bit data

A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Last Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is

Description : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Last Answer : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016

Description : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

Last Answer : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to

Description : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is (A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

Last Answer : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

A switch tail ring counter is made by using a single D-FF. The resulting circuit is

Description : A switch tail ring counter is made by using a single D-FF. The resulting circuit is (A) T-FF (B) D-FF (C) SR-FF (D) JK-FF

Last Answer : A switch tail ring counter is made by using a single D-FF. The resulting circuit is T-FF

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

A single force and a couple acting in the same plane upon a rigid body?

Description : A single force and a couple acting in the same plane upon a rigid body?

Last Answer : A single force and a couple acting in the same plane upon a rigid body cannot balance each other.

Describe different RT level computational and sequential components used to design single function processors.

Description : Describe different RT level computational and sequential components used to design single function processors.

Last Answer : RT-level combinational components:- To reduce the complexity in digital logic, combinational components are used, which are more powerful than logic gates.  Such combinational ... during a clock edge. An asynchronous inputs value effects the circuit independent of the clock.

The power factor of a single phase load can be calculated if the instruments available are?

Last Answer : The power factor of a single phase load can be calculated if the instruments available are three ammeters or three voltmeters.

In a single phase power factor meter the phase difference between the currents in the two pressure coils is?

Last Answer : In a single phase power factor meter the phase difference between the currents in the two pressure coils is exactly 90°.

The two pressure coils of a single phase power factor meter have?

Last Answer : The two pressure coils of a single phase power factor meter have the same dimensions and the same number of turns.

Induction type single phase energy meters measure electric energy in?

Last Answer : Induction type single phase energy meters measure electric energy in kWh.