What are the advantages of learning quantity surveying?

What are the advantages of learning quantity surveying?
by

1 Answer

Answer :

A quantity surveyor calculates the cost of project in terms of budget, time and bills. They perform commercial risk analysis. Therefore jobs available for a quantity surveyor are in large construction firms, architecture firms, law firms, governmental agencies and construction advisory firms. If you have are certified quantity surveyor then you can get high pay scales. You can start your own business also. Dynamic Quantity Surveying Training Institute is one of well known institute in pune which I know. They provide practical training to Beginners and Engineers as per the Industry requirements of Construction companies in India and Abroad. They directly prepare Engineers for the various positions like Quantity Surveying, Billing Engineer, Project Manager, Estimators, Tendering, Contract Managers-Civil and More.You can find more information about the civilengineers.co.in/ quantity-surveying-classes-courses-in-pune/
by
selected by

Related questions

State two advantages of plane table surveying

Description : State two advantages of plane table surveying

Last Answer : 1.it is most rapid method of surveying. 2. it is suitable for magnetic areas. 3.The map can be prepared easily ,and does not require greater skill. 4.Irregular objects can be represented ... is less costly. 7 The check lines detects the errors of measurement and plotting on field itself. 

Is haggling of any kind appropriate when surveying a rental property?

Description : Is haggling of any kind appropriate when surveying a rental property?

Last Answer : This is negotiable. Absolutely.

How does surveying work?

Description : How does surveying work?

Last Answer : I suspect it has more to do with trigonometry and triangulation, but I’m not a surveyor.

Which of the following is not an application of Green’s theorem? a) Solving two dimensional flow integrals b) Area surveying c) Volume of plane figures d) Centroid of plane figures

Description : Which of the following is not an application of Green’s theorem? a) Solving two dimensional flow integrals b) Area surveying c) Volume of plane figures d) Centroid of plane figures

Last Answer : c) Volume of plane figures

Diaphragm of a surveying telescope is held inside (A) Eye-piece (B) Objective (C) Telescope tube at its mid point (D) Telescope at the end nearer the eye-piece

Description : Diaphragm of a surveying telescope is held inside  (A) Eye-piece  (B) Objective  (C) Telescope tube at its mid point  (D) Telescope at the end nearer the eye-piece

Last Answer : (D) Telescope at the end nearer the eye-piece

An internal focussing type surveying telescope, may be focussed by the movement of (A) Objective glass of the telescope (B) Convex-lens in the telescope (C) Concave lens in the telescope (D) Plano-convex lens in the telescope

Description : An internal focussing type surveying telescope, may be focussed by the movement of  (A) Objective glass of the telescope  (B) Convex-lens in the telescope  (C) Concave lens in the telescope  (D) Plano-convex lens in the telescope

Last Answer : (C) Concave lens in the telescope 

In chain surveying tie lines are primarily provided (A) To check the accuracy of the survey (B) To take offsets for detail survey(C) To avoid long offsets from chain lines (D) To increase the number of chain lines

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

Geodetic surveying is undertaken (A) For production of accurate maps of wide areas (B) For developing the science of geodesy (C) Making use of most accurate instruments and methods of observation (D) All the above

Description : Geodetic surveying is undertaken  (A) For production of accurate maps of wide areas  (B) For developing the science of geodesy  (C) Making use of most accurate instruments and methods of observation  (D) All the above 

Last Answer : (D) All the above 

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

The additional lines which are measured to show the correctness of the chain surveying are called: (A) Check clines (B) Proof lines (C) Tie lines (D) All of these

Description : The additional lines which are measured to show the correctness of the chain surveying are called: (A) Check clines (B) Proof lines (C) Tie lines (D) All of these

Last Answer : (D) All of these

The main principle of surveying is to work (A) From part to the whole (B) From whole to the part (C) From higher level to the lower level (D) From lower level to higher level

Description : The main principle of surveying is to work (A) From part to the whole (B) From whole to the part (C) From higher level to the lower level (D) From lower level to higher level

Last Answer : (B) From whole to the part

Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Description : Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Last Answer : (C) Plan table surveying

In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Description : In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Last Answer : (D) An optical square

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Last Answer : (C) Tacheometrical surveying

While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Description : Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Last Answer : (B) Drawing perpendiculars with a chain

The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Description : The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Last Answer : (C) Plane table surveying

The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Description : In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Last Answer : (A) Linear measurements only

Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Description : Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Last Answer : (A) Small areas in open ground

Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Description : Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Last Answer : (C) To indicate the accuracy of the survey work

Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Description : Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Last Answer : (A) Invar

In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Description : In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Last Answer : (c) Triangle of error

Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum, say MSL (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Description : Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum ... (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Last Answer : (c) 3 and 4

When surveying: A. Tilt the cast

Description : When surveying: A. Tilt the cast

Last Answer : A. Tilt the cast

The process of surveying is therefore in three stages namely:

Description : The process of surveying is therefore in three stages namely:

Last Answer : (i) Taking a general view This part of the definition is important as it indicates the need to obtain an overall picture of what is required before any type of survey work is undertaken. In ... of quantities, datasheets, drawings and in land surveying maps and plan showing the features on the land.

What is surveying

Description : What is surveying?

Last Answer : Surveying is defined as taking a general view of, by observation and measurement determining the boundaries, size, position, quantity, condition, value etc. of land, estates, building, farms ... , datasheets, drawings and in land surveying maps and plan showing the features on the land.

Tacheometric Surveying

Description : Tacheometric Surveying

Last Answer : Tacheometric is a branch of surveying in which horizontal and vertical distances are determined by taking angular observation with an instrument known as a tachometer. Tacheometric surveying is adopted in rough ... be prepared for investigation works within a short time on the basis of such survey.

Compare radiation and intersection methods of plane table surveying on any two parameters.

Description : Compare radiation and intersection methods of plane table surveying on any two parameters. 

Last Answer : Radiation method Intersection method 1. It requires the plane table to occupy a single station.  1. This method requires setting the table up at minimum of two stations.  ... for locating inaccessible points by the intersection of the rays drawn from two instruments stations. 

Describe any one method of orientation of plane table surveying

Description : Describe any one method of orientation of plane table surveying

Last Answer : Orientation by back sighting method: This method is accurate and is always preferred. Procedure: 1.Suppose A and B are two stations.The plane table is set up over A. The table is leveled by spirit level ... are perfect and needle is exactly at 0-0 , the orientation is said to be perfect.

Explain legal aspects of surveying from surveyor’s perspective.

Description : Explain legal aspects of surveying from surveyor’s perspective.

Last Answer : Surveyor is the professional who assess the loss or damage & serve the link between insured & insurer. They only function in non-life business. Their main job is to assess the actual loss ... bills and Doctors certificate. The above is the legal Aspects of surveying from surveyor's perspective.

State the object of surveying.

Description : State the object of surveying. 

Last Answer : 1. The object of surveying is to prepare a plan / map to show the relative positions of the objects on the surface of the earth. It shows the natural features of a country such as rivers, hills, lakes ... of different points. 3. To determine area of given piece of land. 4. To prepare contour maps. 

State the classification of surveying based on nature of field.

Description : State the classification of surveying based on nature of field. 

Last Answer : a) Land surveying b) Marine or Navigation surveying c) Astronomical surveying

Explain the principle of surveying.

Description : Explain the principle of surveying.

Last Answer : Principle of surveying are as follows: i. To work from whole to part. According to the first principle, the whole area is first enclosed by main stations and main survey ... The new station or ground point is located using linear measurement or angular measurement or both measurements.

State the two uses of survey based on geodetic surveying

Description : State the two uses of survey based on geodetic surveying

Last Answer : Two uses of survey based on geodetic surveying:- i) To determine the precise position s on the surface of the earth. ii) Preparation of maps of large area like map of a country, state ... ) Establishment of GTS bench Marks across the country. iv) Preparation of military maps for defense purposes.

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Describe back sighting method of orientation of plane table surveying.

Description : Describe back sighting method of orientation of plane table surveying.

Last Answer : Backsight method of orientation 1. Assume we have to orient the table at next station B' represented on paper by point b'. 2.the line ba' is drawn on previous station A'. 3.the alidade is kept ... A'. 4. When the plotted line ab' coincides with line AB' and table will be oriented.

Define surveying.

Description : Define surveying.

Last Answer : Surveying- It is branch of civil engineering in which relative positions of ground points are determined by taking linear and angular measurement.

Define surveying & state its objectives

Description : Define surveying & state its objectives

Last Answer : Surveying- It is branch of civil engineering in which relative positions of ground points are determined by taking linear and angular measurement. Objectives: 1. To determine the relative positions of ... quantities 4. To prepare a topographical map showing details of hills, valleys and rivers.

State any four classification of surveying based on instrument uesd.

Description : State any four classification of surveying based on instrument uesd. 

Last Answer : i) Chain survey ii) Plane table survey iii) Theodolite survey, iv) Tachometric survey v) compass survey vi) photographic survey, vii) Aerial survey 

State any two uses of Plane Surveying.

Description : State any two uses of Plane Surveying. 

Last Answer : 1) Plane surveying is used for measuring small distance. 2) When area is less than 260 km2, plane survey is normally done. 3) When desired accuracy is less, plane survey is done.

Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Description : Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Last Answer : 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by placing alidade ... the case of the survey of mountainous country. 5. The only linear measurement required is that of a base line.

Explain principle of chain surveying

Description : Explain principle of chain surveying 

Last Answer : 1) Principle of chain surveying is triangulation 2) Triangulation consists of frame work of triangles. The whole area is divided into network of triangles. 3) A triangle is the only simple plane ... to be adopted depends upon the shape & configuration of the ground & the natural obstacles. 

State the use of alidade in plane table surveying

Description : State the use of alidade in plane table surveying

Last Answer : 1) It is used for sighting the objects to be located.  2) It is used for drawing the rays. 

Enlist different errors in compass surveying.

Description : Enlist different errors in compass surveying.

Last Answer : Various errors in compass surveying are classified asi) Instrumental errors. ii) Personal errors or observational errors iii) Errors caused due to external errors (natural errors) i) ... magnetic declination. c) Local attraction due to proximity of magnetic substances or magnetic field.

State any four precautions to be taken while selecting stations for chain surveying.

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.

Write-four uses of surveying.

Description : Write-four uses of surveying.

Last Answer : Uses of surveying are: 1) Surveying is useful to plot ground details in various maps like topographic and cadastral maps. 2) It is useful in navigational movement planning through military survey. ... beneficial in collecting details of water bodies on earth like lake, pond, river, sea etc.