In the Rough Cut buying stage, “reliability” is expressed in terms of: a. Mean Time Between Failure. b. how long the product will last. c. years. d. months. e. Mean Time Before Failure.

In the Rough Cut buying stage, “reliability” is expressed in terms of: a. Mean Time Between Failure.
b. how long the product will last.
c. years.
d. months.
e. Mean Time Before Failure.
by

1 Answer

Answer :

a. Mean Time Between Failure.
by

Related questions

Customers go through a two-stage buying process: The Rough Cut and the Fine Cut. In the Rough Cut, buyers focus on four product characteristics. Which one of the following is NOT one of these four product characteristics? a. Performance b. Age c. Size d. Reliability e. Price

Description : Customers go through a two-stage buying process: The Rough Cut and the Fine Cut. In the Rough Cut, buyers focus on four product characteristics. Which one of the following is NOT one of these four product characteristics? a. Performance b. Age c. Size d. Reliability e. Price

Last Answer : b. Age

What two factors are considered in both the rough cut and fine cut of the customer buying process? a. Price and Reliability b. Price and Age c. Age and Performance d. Reliability and age

Description : What two factors are considered in both the rough cut and fine cut of the customer buying process? a. Price and Reliability b. Price and Age c. Age and Performance d. Reliability and age

Last Answer : a. Price and Reliability

A product’s __________ does not play a role in the rough cut a. Positioning b. Price c. Reliability d. Age e. MBTF

Description : A product’s __________ does not play a role in the rough cut a. Positioning b. Price c. Reliability d. Age e. MBTF

Last Answer : d. Age

Pricing plays a role a. when repositioning a product. b. in the rough cut stage of the purchase decision. c. in neither stage of the purchase decision. d. in the fine cut stage of the purchase decision. e. in both b and d.

Description : Pricing plays a role a. when repositioning a product. b. in the rough cut stage of the purchase decision. c. in neither stage of the purchase decision. d. in the fine cut stage of the purchase decision. e. in both b and d.

Last Answer : e. in both b and d.

A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut distinction. c. maximize the effectiveness of R&D, to achieve higher demand you must have a substantially better offer, it does not matter how good your product is if you stock out. d. all of the above.

Description : A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut ... , it does not matter how good your product is if you stock out. d. all of the above.

Last Answer : d. all of the above.

Low Tech customers emphasize buying criteria in which order? a. Price, Age, Positioning, Reliability b. Age, Reliability, Price, Positioning c. Positioning, Age, Price, Reliability d. Price, Positioning, Age, Reliability e. Price, Reliability, Positioning, Age

Description : Low Tech customers emphasize buying criteria in which order? a. Price, Age, Positioning, Reliability b. Age, Reliability, Price, Positioning c. Positioning, Age, Price, Reliability d. Price, Positioning, Age, Reliability e. Price, Reliability, Positioning, Age

Last Answer : a. Price, Age, Positioning, Reliability

In the Fine Cut, a product’s appeal is drive by its _________________. a. Color b. Customer Survey Score c. Usage d. Rough cut position e. Demand

Description : In the Fine Cut, a product’s appeal is drive by its _________________. a. Color b. Customer Survey Score c. Usage d. Rough cut position e. Demand

Last Answer : b. Customer Survey Score

Which of the following are not considered in the Fine Cut? a. Positioning b. Automation c. Age d. Reliability e. Price

Description : Which of the following are not considered in the Fine Cut? a. Positioning b. Automation c. Age d. Reliability e. Price

Last Answer : b. Automation

Products with prices, MTBFs or positioning in the segments rough cut do contribute to the segments accessibility. a. True b. False

Description : Products with prices, MTBFs or positioning in the segments rough cut do contribute to the segments accessibility. a. True b. False

Last Answer : b. False

.Customers go through ________________stage(s) as they make their purchase decisions. a. fine cut only b. rough cut only c. fine cut and rough cut d. none of the above

Description : .Customers go through ________________stage(s) as they make their purchase decisions. a. fine cut only b. rough cut only c. fine cut and rough cut d. none of the above

Last Answer : c. fine cut and rough cut

Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Description : Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Last Answer : b. 4.0

What’s the measure for product reliability? a. Return rates of products sold b. Customers’ happiness statements c. Expected time a product lasts d. Price e. All of the above

Description : What’s the measure for product reliability? a. Return rates of products sold b. Customers’ happiness statements c. Expected time a product lasts d. Price e. All of the above

Last Answer : c. Expected time a product lasts

What product attributes do Performance customers value the most? a. Age b. Price c. Positioning d. Reliability e. Other

Description : What product attributes do Performance customers value the most? a. Age b. Price c. Positioning d. Reliability e. Other

Last Answer : d. Reliability

The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Description : The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Last Answer : a. $5.10.

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

Marketing is concerned with 4 things. What are they? a. Price, Reliability, Age, and Product b. Place, Age, Promotion, and Product c. Price, Place, Promotion, and Product d. Product, Place, Promotion, and Reliability e. Innovation, Product, Place, and Promotion

Description : Marketing is concerned with 4 things. What are they? a. Price, Reliability, Age, and Product b. Place, Age, Promotion, and Product c. Price, Place, Promotion, and Product d. Product, Place, Promotion, and Reliability e. Innovation, Product, Place, and Promotion

Last Answer : c. Price, Place, Promotion, and Product

What is the minimum amount of time that it takes to create a new product? a. 3 months b. 6 months c. 1 year d. 2 years e. 5 years

Description : What is the minimum amount of time that it takes to create a new product? a. 3 months b. 6 months c. 1 year d. 2 years e. 5 years

Last Answer : c. 1 year

Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Description : Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Last Answer : b. low automation levels.

It takes ______ years to invent a product. a. 3 or 4 months b. 6 months c. More than 1 year but no more than 3 years d. More than 3 years

Description : It takes ______ years to invent a product. a. 3 or 4 months b. 6 months c. More than 1 year but no more than 3 years d. More than 3 years

Last Answer : c. More than 1 year but no more than 3 years

High end customers prefer a product age of 0, at what age exceeds the fine cut for the product a. 5 years. b. 3 years. c. 2 years. d. 2.5 years. e. 4 years.

Description : High end customers prefer a product age of 0, at what age exceeds the fine cut for the product a. 5 years. b. 3 years. c. 2 years. d. 2.5 years. e. 4 years.

Last Answer : c. 2 years.

The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare reliability against price. d. a marketing tool used to compare age against position. e. a marketing tool used to compare time against motion.

Description : The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare ... used to compare age against position. e. a marketing tool used to compare time against motion.

Last Answer : a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size.

Customers evaluate the sensor industry based on: a. Positioning. b. Reliability. c. Age. d. Price. e. All of the Above.

Description : Customers evaluate the sensor industry based on: a. Positioning. b. Reliability. c. Age. d. Price. e. All of the Above.

Last Answer : e. All of the Above.

How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10

Description : How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10

Last Answer : c. $0.30

Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Description : Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Last Answer : d. All of the above

R&D projects can drive a product’s: a. size. b. age. c. reliability. d. performance. e. all of the above.

Description : R&D projects can drive a product’s: a. size. b. age. c. reliability. d. performance. e. all of the above.

Last Answer : e. all of the above.

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

The two characteristics that the perceptual map evaluates are a. Performance and Size. b. Performance and Price. c. Size and Price. d. Reliability and Performance. e. none of the above.

Description : The two characteristics that the perceptual map evaluates are a. Performance and Size. b. Performance and Price. c. Size and Price. d. Reliability and Performance. e. none of the above.

Last Answer : a. Performance and Size.

Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Description : Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Last Answer : a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center.

R&D project length can be as long as ___________. a. 3 months b. 2 years c. 1 year d. 3 years

Description : R&D project length can be as long as ___________. a. 3 months b. 2 years c. 1 year d. 3 years

Last Answer : d. 3 years

Assuming no additional product promotion, what percent of customers, reached through last year’s marketing campaign will carry over into the current year? a. 33% b. 50% c. 67% d. 0% e. None of the above

Description : Assuming no additional product promotion, what percent of customers, reached through last year’s marketing campaign will carry over into the current year? a. 33% b. 50% c. 67% d. 0% e. None of the above

Last Answer : c. 67%

When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Description : When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Last Answer : b. in 1 year.

What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Description : What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Last Answer : d. All of the above

What are the top buying criteria that low end customers most value? a. Age b. Price c. Quality d. Positioning e. Time

Description : What are the top buying criteria that low end customers most value? a. Age b. Price c. Quality d. Positioning e. Time

Last Answer : b. Price

What is a market segment? a. Group of customers with differing purchasing concerns b. Area of perceptual map where all points intersect c. Group of customers with similar purchasing concerns d. Geographic area where customers are located e. Common area of buying patterns

Description : What is a market segment? a. Group of customers with differing purchasing concerns b. Area of perceptual map where all points intersect c. Group of customers with similar purchasing concerns d. Geographic area where customers are located e. Common area of buying patterns

Last Answer : c. Group of customers with similar purchasing concerns

There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Description : There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Last Answer : d. 1 year; 1 year

If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Description : If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Last Answer : c. it is available in the next year.

In the Traditional Segment, age as a buying criteria is accounts for which percentage of the consumer decision: a. 53%. b. 43%. c. 47%.

Description : In the Traditional Segment, age as a buying criteria is accounts for which percentage of the consumer decision: a. 53%. b. 43%. c. 47%.

Last Answer : c. 47%.

In the High End Segment, price as a buying criteria is accounts for which percentage of the consumer decision: a. 53%. b. 9%. c. 23%. d. 19%.

Description : In the High End Segment, price as a buying criteria is accounts for which percentage of the consumer decision: a. 53%. b. 9%. c. 23%. d. 19%.

Last Answer : b. 9%.

In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. c. At the center of each inner fine cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Description : In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. ... cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Last Answer : b. The inner fine cut circles represent the heart of the segment where demand is strong.

The inner fine cut circles on the perceptual map have a radius of ________ units. a. 2 b. 2.5 c. 2.75 d. 1.5 e. 3

Description : The inner fine cut circles on the perceptual map have a radius of ________ units. a. 2 b. 2.5 c. 2.75 d. 1.5 e. 3

Last Answer : b. 2.5

Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the newest technology at the cheapest price. c. High end customers want high performance and small size. d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Description : Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the ... . d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Last Answer : b. Low end customers want the newest technology at the cheapest price.

For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. High End preferred Position is located in the lower left of the circle. d. Performance preferred position is located in the lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Description : For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. ... lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Last Answer : c. High End preferred Position is located in the lower left of the circle.

n Capstone® a. the terms age and perceived age are not used interchangeably. b. the term MTBF means multiple transient business format. c. the terms age and perceived age are used interchangeably. d. all products will eventually have to be retired. e. none of the above.

Description : n Capstone® a. the terms age and perceived age are not used interchangeably. b. the term MTBF means multiple transient business format. c. the terms age and perceived age are used interchangeably. d. all products will eventually have to be retired. e. none of the above.

Last Answer : c. the terms age and perceived age are used interchangeably.

Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. 4 weeks c. 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Description : Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. ... . 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Last Answer : a. 2 weeks

Account Receivables lag impacts sales. At no credit terms, the appeal falls to about ______ %, at 30 days, appeal is _____ %, at 60 days, appeal is ______%. a. 98.5, 92, 65 b. 65, 92, 98.5 c. 70, 85, 99 d. none of the above, there is no impact

Description : Account Receivables lag impacts sales. At no credit terms, the appeal falls to about ______ %, at 30 days, appeal is _____ %, at 60 days, appeal is ______%. a. 98.5, 92, 65 b. 65, 92, 98.5 c. 70, 85, 99 d. none of the above, there is no impact

Last Answer : b. 65, 92, 98.5

If your company offers no credit terms, demand a. remains constant. b. falls 25%. c. falls 50%. d. falls 65%.

Description : If your company offers no credit terms, demand a. remains constant. b. falls 25%. c. falls 50%. d. falls 65%.

Last Answer : d. falls 65%.

An accessibility of 60% means that ________. a. only 60% of customers have an easy time finding a product, talking to a salesperson and taking delivery. b. of the customers who cannot easily locate the product, half will seek it out. c. 40% of customers will not buy the product. d. a and b. e. a and c.

Description : An accessibility of 60% means that ________. a. only 60% of customers have an easy time finding a product, talking to a salesperson and taking delivery. b. of the customers who cannot easily locate the product, half will ... c. 40% of customers will not buy the product. d. a and b. e. a and c.

Last Answer : d. a and b.

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

These TQM initiatives reduce administrative overhead; reduces the R&D cycle time and enhances the effectiveness of the promotion and sales budget. a. Concurrent Engineering (CCE); Channel Support systems and Just-in-Time Inventory b. Quality Function Deployment and Benchmarking c. Continuous Product Improvement systems (CPI) and Just-in-Time Inventory d. Channel Support systems and Six Sigma e. Quality Initiative Training (QIT)

Description : These TQM initiatives reduce administrative overhead; reduces the R&D cycle time and enhances the effectiveness of the promotion and sales budget. a. Concurrent Engineering (CCE); Channel Support systems ... Inventory d. Channel Support systems and Six Sigma e. Quality Initiative Training (QIT)

Last Answer : b. Quality Function Deployment and Benchmarking